REPAIR TO CERTAIN ROAD AND ALLIED WORKS IN ZONE I AND ZONE II AREA UNDER GE JAIPUR AT JAIPUR MIL STN

Amount

M&L for repair to potholes any depth not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good d by applying tack coat @ 5 kg/per 10 sq m, using paving bitumen of grade VG-30 putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). complete all as specified & as directed.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specifed and directed.

M& L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exc 400 sqm Exc 50 mm deep and n exc 100 mm deep complete all as specified and directed by Engr-in-Charge.

M& L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

M& L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) paving bitumen any penetration binder content of 4% by weight of total mix complete all as specified and directed.

M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262 laid through road marking machine in a layer painting lines dashes arrows letters etc on roads pavements and the like exceeding 10cm wide with road marking paint white or golden yellow of CRYSTALEX using 5Kg material per square meter by incorporating the white glass beads for reflectivity i 100 mm width etc complete all as specified and directed.

M&L preparing old decorated surface of any description in kerb stones and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L preparing old decorated surface of any description in kerb stones and applying two coats of synthetic enamel paint complete all as specified and directed.

M & L for laying 30mm thick bitumen mastic wearing coat with indusrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic cooker and laid to required level and slope including providing antiskid surfaces with bitumen precoated fine grained hard stone chipping approved size at the rate 0.005 cum per 10 Sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protuding 1mm to 4mm over mastic surface including cleaning the surface, removal of debris etc complete all as specified and directed. Note:-Bitumen shall be used @ 10.2% as per Morth Specification and work shall be executed all as specified in IRC -107-2013 (Ist Revision).

S&F Geo fabric/textile not less than 10cm wide and 300 gram/Sqm on concrete road joints complete all as specified and directed by Engr-in-Charge

M & L for applying evenly a priming/tack coat with bituminous primer (VG-10) viscosity grade @ 5 kg per 10 sqm using paving bitumen complete all as specified & as directed.

M & L for preparing of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and providing laying spreadig 30 mm thick Bituminous premix semi dense asphaltic concrete of with 5.5% binder content (VG-10) by weight of total mix including heating bitumen to the required temperature mixing bituminous concrete in automatic and temperature controlled hot mixing plant laying spreading uniformaly by means of mechanical paver roller and consolidation to the required gradient and camber with 8 to 12 tonne power rolller complete all as specified & as directed.

M & L for preparing bitumen surface of road and marking 2 mm thick centre lines, stop lines dashes arrows etc and like n exc 10cm wide on road pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS-3262-1998 with special applicatior machine all as per manufactures instruction complete all as specified and directed.

Ditto as above item no 13 but 15 cm wide

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed (Make : Dark Eye or equivalent)

Demolitin of plain cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

M & L for 75 mm thick cement concrete in sub floors sub base and paving C-2, 1:3:6 (40 mm graded aggregates) all as specified and directed.

Schedule of Credit

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3168736)

Satish kumar and company (BID ID -3172670)