Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | ₹32.0 L | L1 | Accepted-AOC Being lowest |
| 2 | L2₹32.6 LRejected-Finance MURSTEY COLONY PLOT NO 16 LEH 194101 LADAKH | LEH LADAKH | LADAKH | 194101 | ₹32.6 L | L2 | Rejected-Finance Other than L1 |
| 3 | Rejected-Technical BOGDANG NUBRA PIN 194101 | BOGDANG | NUBRA | LADAKH | 194101 | - | - | Rejected-Technical Not recommended since the firm has not uploaded complete documents as per NIT. |
| Sl No | Description | Qty | Unit | M/S SHAMSHER ALI SUFI L2 | M/S Praveen Kumar and Sons L1 |
|---|---|---|---|---|---|
| 1.00 | S&F Ladakhi style wooden shirshak fully designed as per Ladakhi style for roof/ window chajja on vertical/ horizontal surfaces of wall using the following specifications:-
(a) S&F IInd class hard wood wooden gutties of size 50 mm x 50mm x 300/ 100 x 100 x 600 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand)
(b) S&F Horizontal runner IInd class hard wood with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment tongue and groove method of fittings as in wall with router machine for designing the wooden surface
(c) M&L for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/ glossy complete all as specified and/or as directed by the Engr-In-Charge. | 80 | Rm | 12,490.54 ₹10.0 L | 18,500 ₹14.8 L |
| 2.00 | M&L Ladakhi style IInd class hardwood 5-12 mm thick wooden film on the face side and other side as in wall and ceilings fixed with screws as per manufacturers instructions including wooden nap grid frame work fixed with screws/ plugs etc. including GI suspenders of 4- 6 mm dia up to 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design and IInd class hard wood wooden gutties of size 50 mm x 50mm x 300/ 100 x 100 x 600 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge. | 120 | Sqm | 4,100 ₹4.9 L | 3,000 ₹3.6 L |
| 3.00 | S&F 45mm thick 2nd class softwood, plain, framed, panelled shutters, with panels of timber flat on both sides (feather edged) fixing 8 Ladakhi auspicious signs in wooden on the face side as in wall fixed with screws/ fasteners as per manufacturers instructions including wooden snap grid frame work fixed with screws/ plugs etc by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge. | 64.8 | Sqm | 6,500 ₹4.2 L | 3,200 ₹2.1 L |
| 4.00 | M&L for 8-10 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, SS handle 900 mm long, SS hinges required complete all as specified and/or as directed by the Engr-In-Charge. | 15 | Sqm | 11,500 ₹1.7 L | 1,250 ₹18,750 |
| 5.00 | M&L for 7-10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed, over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and/or as directed by the Engr-In-Charge. | 20 | Sqm | 1,670 ₹33,400 | 1,200 ₹24,000 |
| 6.00 | S&F wooden panelling on vertical surfaces of wall using the following specifications:-
(a) S&F IInd class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand)
(b) S&F Horizontal runner IInd class hardwood @ 1.20 mtr C/C of cross sectional area exc. 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment.
(c) S&F IInd class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws.
(d) S&F IInd class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified.
(e) M&L for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/glossy complete all as specified and directed. | 40 | Sqm | 1,900 ₹76,000 | 2,000 ₹80,000 |
| 7.00 | M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting etc. and screed bed with CM (1:4) 20mm thick for laying floor tiles complete all as specified and/or as directed by Engr-in-Charge. | 15 | Sqm | 5,000 ₹75,000 | 4,000 ₹60,000 |
| 8.00 | M&L for providing edge moulding to 18-20 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and/or as directed by the Engr-In-Charge. | 17 | Rm | 220 ₹3,740 | 2,000 ₹34,000 |
| 9.00 | S&F solid fanesta coloured basement/sliding window/door frames made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and/or as directed by the Engr-In-Charge. Note:- (i) Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately
(ii)Each member of window to be measured separately with clear length. | 30 | Rm | 2,450 ₹73,500 | 2,000 ₹60,000 |
| 10.00 | M&L factory made fanesta coloured fixed door/ window made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners- 5mm thick glazing with selected quality glass, complete all as specified and/or as directed by the Engr-In-Charge. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories Net opening will be measured for payment purpose.) | 15 | Sqm | 21,456.55 ₹3.2 L | 15,000 ₹2.3 L |
Updated dates
Tender Value
₹33.8 L
EMD Value
₹67,500
Closing Date
20 Nov 2025, 6:00 pmClosed
CWE, HQ 138 WE
CWE, HQ 138 WE
PROVN OF IMPROVEMENT OF ENTRANCE AT BLDG NO. P-140 UNDER GE 865 EWS
2025_MES_731434_2
138WE/L-180/2025-26
Open Tender
Civil Works
180 days
GE 865 EWS
As per tender documents
6 documents required · 6 mandatory
₹500
GE 865 EWS
₹67,500
Yes
17 Jan 2026
30 Oct 2025
27 Nov 2025
30 Oct 2025
20 Nov 2025
6 Nov 2025
Amount
S&F Ladakhi style wooden shirshak fully designed as per Ladakhi style for roof/ window chajja on vertical/ horizontal surfaces of wall using the following specifications:- (a) S&F IInd class hard wood wooden gutties of size 50 mm x 50mm x 300/ 100 x 100 x 600 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) (b) S&F Horizontal runner IInd class hard wood with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment tongue and groove method of fittings as in wall with router machine for designing the wooden surface (c) M&L for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/ glossy complete all as specified and/or as directed by the Engr-In-Charge.
M&L Ladakhi style IInd class hardwood 5-12 mm thick wooden film on the face side and other side as in wall and ceilings fixed with screws as per manufacturers instructions including wooden nap grid frame work fixed with screws/ plugs etc. including GI suspenders of 4- 6 mm dia up to 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design and IInd class hard wood wooden gutties of size 50 mm x 50mm x 300/ 100 x 100 x 600 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge.
S&F 45mm thick 2nd class softwood, plain, framed, panelled shutters, with panels of timber flat on both sides (feather edged) fixing 8 Ladakhi auspicious signs in wooden on the face side as in wall fixed with screws/ fasteners as per manufacturers instructions including wooden snap grid frame work fixed with screws/ plugs etc by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) for wall complete all as specified and/or as directed by the Engr-In-Charge.
M&L for 8-10 mm thick toughened glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, SS handle 900 mm long, SS hinges required complete all as specified and/or as directed by the Engr-In-Charge.
M&L for 7-10mm thick teak wood finish laminated wooden flooring interlocked with each others and its size as directed, over 6 micron polyethylene sheeting over the concrete to minimize moisture migration from the concrete complete all as specified and/or as directed by the Engr-In-Charge.
S&F wooden panelling on vertical surfaces of wall using the following specifications:- (a) S&F IInd class hard wood wooden gutties of size 25 mm x 25mm x 200 mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3 (1 for cement and 3 for sand) (b) S&F Horizontal runner IInd class hardwood @ 1.20 mtr C/C of cross sectional area exc. 13 Sqcm and 25 Sqcm clean swan with nails or screws, treated with two coats of cerosite oil mixed with good quality pesticide for antitermite treatment. (c) S&F IInd class hard wood boarding 12 to 15 mm with tongue and groove method of fittings as in wall panelling planed one side, and other side wrought fixed with screws. (d) S&F IInd class hard wood decorative beading 40 mm wide on top and bottom along perimeter of the wall or as specified. (e) M&L for French polishing on wooden surface any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till the surface smooth/glossy complete all as specified and directed.
M&L for 20 mm thick granite stone (any type) (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting etc. and screed bed with CM (1:4) 20mm thick for laying floor tiles complete all as specified and/or as directed by Engr-in-Charge.
M&L for providing edge moulding to 18-20 mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and/or as directed by the Engr-In-Charge.
S&F solid fanesta coloured basement/sliding window/door frames made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and/or as directed by the Engr-In-Charge. Note:- (i) Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately (ii)Each member of window to be measured separately with clear length.
S&F Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frames for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and/or as directed by the Engr-in-Charge.
M&L for powder coated aluminium door shuttlers, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100 mm longs (3 Nos) suitable handle (2 Nos) (Glass / Wiremesh should be measured seperately) complete all as specified and/or as directed by Engr-in-Charge.
S&F anodised aluminium window and ventilator shutters, including aluminium jali fixed in one side, side hung type without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No) etc. complete all as specified and/or as directed by Engr-in-Charge.
S&F in repair aluminium (die cast) body door closer hydraulically designation No 3 universal type suitable for door shutter of 851 to1000mm in width and weight 61 to 80 kg complete all as specified and/or as directed by Engr-in-Charge.
S&F MS rolled sections in main and cross beams, hip and jack rafters; purlins where connected to common rafters running rails and guids for sliding doors, fixed with angle cleats or other connecting plates and similar work conforming to Fe-410, Gde-E-250, quality A, complete all as specified and/or as directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and/or directed by Engr-in-Charge.
M&L precast solid blocks in cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in block masonry, exc.10cm in width and set in cement mortar 1:4, complete all as specified and/or directed by Engr-in-Charge.
M&L for 15mm thick rendering on fair faces of block/ brick wall works finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and/or directed by Engr-in-Charge.
M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed by Engineer-in-Charge.
M&L distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification with two or more coats on new work over a coat of primer over a coat of 3mm thk wall care putty on plastered surface of any description, including preparation of new plastered surface complete all as specified and/or as directed by Engineer-in-Charge.
S&F 300mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and as directed by Engineer-in-Charge.
S&F 375 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and as directed by Engineer-in-Charge.
M&L sheet glass 5.5mm thick ordinary quality and glazing with oil putty or wooden beads in square not exc. 0.50 sqm in each pane complete all as specified and as directed.
S&F 150mm long floor door stopper of brass body and tongue with hard drawn steel spring of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor
S&F Butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, typeB-11 complete all as specified and directed.
S&F extruded brass cast type handles 150-300 mm long, fabricated type, anodised with powder coating, complete all as specified and directed.
S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified and directed.
S&F 1000 ltr capacity rotational moulded polythelene water storage tanks tripple layer white colour (cylindrical vertical with clossed top) hoisted and fixed in position all as specified in SSR Part 1 complete all as specified and/or as directed by Engineer-in-Charge.
S&F Urinal spreader(stainless steel) of any colour for fixing with 15 mm dia pipe, complete all as specified and/or as directed by Engineer-in-Charge.
S&F Vitreous China full stall urinals, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, complete all as specified and/or as directed by Engineer-in-Charge.
S&F single piece china wash down water closet , with UF soft close seat cover, hinges, accessories set, cistern fittings size, complete all as specified and/or as directed by Engineer-in-Charge.
S&F wash hand basin table top type fixed on granite top grooving and cutting if required with coloured sunmica sheet at all over with stainless steel legs at all corners complete all as specified and directed.
S&F in repair pillar tap fancy type single lever tall body with 150 mm extension body fixed on granite top for supply of hot or cold water fixeing with washers complete all as specified and directed. (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F hand shower ( health faucet ) CP with 6-8 mm dia. and 1-1.5 metre long flexible tube and wall hook complete all a specified and directed. (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F in chromium plated coloured/stainless steel paper holder fixed on walls complete all as specified and directed.(Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F angle valve (one way) 15 mm bore cast copper alloy fancy type, cromium plated with cup complete all a specified and directed. (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F chromium plated brass bib tap fancy type screwed down ,screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F glass shelf corner in shape of arc/semicircle/triangular fixed on walls with screws complete all as specified and directed (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F chromium plated/ powder coated towel rack( 1-3 horizontal runners and 1 runner at bottom and min 2 hangers)fixed to walls with screws complete all as specified and directed.(Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F CP brass towel ring(triangular/rectangular/circular) fixed and incl CP brass screws and complete all a specified and directed (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F Soap dish(coloured/powder coated) fixed with incl CP brass screws and complete all a specified and directed(Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F chromimum plated brass 28-32 mm coupling for table top wash hand basin half or full thread with waste pipe of similar dia in pvc/plastic fixed complete all as specified and directed.(Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F PVC connections 15mm size with CP nuts of length 450-600mm and 3 layer protection of pipe with stainless steel wire mesh and double coated pvc pipe for hot and cold complete all a specified and directed. (Make Jaquar/Cera/ESS/Prayag or equivalent)
S&F GI pushup Grating (stainless steel) doom 75-125 mm with waste hole.
S&F 25mm bore 3-layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass treaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified.
S&F 25 mm PPR gate valve conforming to ISO 2000 screw down end for PPR pipe or for union and fixed completey as specified for the size 25mm bore, complete all as specified.
S&F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge.
S&F PVC coated mild steel conduit pipe 25 mm bore (Drapper rod) with a pair of PVC coated MS clamps to hold drapers rod and decoractive attachment at one or both ends of drapers rod, fixed to opening of door/windows (each opening n.exc 1.50m, contained with a pair of clamps and pair of side ornamented attachments), complete all as specified and directed.
S&F PVC waste pipe 32mm bore with cup and washers complete on new or old locations.complete all as specified.
S&F PVC (SWR) pipe 110 mm bore single socketed ,in any length with rubber ring joints,laid in trenches or in floors cement complete all as specified
S&f 75 mm bore PVC (SWR) pipe single socketed , in any length with rubber joints laid in trenches or in floors.
S&f 75mm bore PVC (SWR) pipe bends any radius oval acess.all as specified.
S&F PVC (SWR) 110mm bore bends any radius, oval access complete all as specified
S&F PVC (SWR) 110mm bore junction single (single T), complete all as specified
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal
M&L 75 mm bore PVC (SWR)) multi floor trap with grating including jointing with solvent cement
M&L 110 mm bore PVC (SWR)) multi floor trap/Gulli trap with grating including jointing with solvent cement
M&L for 75mm thick PCC 1:4:8. type D-2 (using 40mm graded crushed stone aggregate) as in sub base complete all as specified.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;, complete all as specified and/or directed by Engr-in-Charge
Point wiring complete with 1.5 sqmm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5 sqmm copper conductor cable as continuous earth lead complete all as specified and/or directed by Engr-in-Charge for the followings:-
One light/exhaust fan point controlled by one way switch.
One switch socket outlet 6 Amps, 230 volts point on same board.
One switch socket outlet 6 Amps, 230 volts point on independent board.
All as per Srl item No 61 above, but using cables 4 Sq mm size.
S&F switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and/or directed by Engr-in-Charge.
S&F socket outlet two in one, 3 pin 6 Amps flush type.230 volts complete all as specified and/or directed by Engr-in-Charge.
S&F switch piano flush button single pole 16 Amps 230 volts one way complete all as specified and/or directed by Engr-in-Charge.
S&F switch Socket outlet multi purpose 3 pin 6 Amps and 16 Amps 230 volts complete all as specified and/or directed by Engr-in-Charge.
S&F exhaust fan, plastic body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers, complete all as specified and/or directed by Engr-in-Charge.
S&F ceiling rose, surface Bakelite three terminals complete all as specified and/or directed by Engr-in-Charge.
S&F made epoxy powder coated distribution board TPN 4 ways (VTPN MCCB DB) with metal door (IP-42 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts outgoings conforming to IS : 8623 complete all as specified and as directed.
S&F MCB SPN 63 Amp 240 Volts, 10 KA, 'C' Curve AC ISI marked complete all as specified and/or directed by Engr-in-Charge.
S&F MCB SP 6-32 Amps. 240 Volts 50 HZ complete all as specified and/or directed by Engr-in-Charge.
Supply and fix LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and/or directed by Engr-in-Charge. Make-Havells /Crompton/ Bajaj.
Supply and laying in replacement of XLPE insulated, aroured, heavy duty electric cables, with stranded aluminium copper conductor rating 1100 volts grading of size 16 sqmm 4 core laid in trenches or passing through pipes, ducts or fixed to walls / poles, complete all as specified and/or directed by Engr-in-Charge.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRv, connection piece etc. complete all as specified and/or directed by Engr-in-Charge.
S&F sheet metal enclosure single pole and neutral with two pin and earth plug complete with one single pole MCB 32 Amps 240 volt complete all as specified and/or directed by Engr-in-Charge.
Supply, fix, install, testing and commissioning floor mounted heat panel opearted on 230 Volt AC, 2000 Watt with digital temperature indicator complete all as specified and/or directed by Engr-in-Charge.
S&F LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver (White/coll white), holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor of suitable size complete all as specified and/or directed by Engr-in-Charge.
M&L for Earthing complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to and including 4 mm dia GI wire as earthing lead, by means of bolts, nuts, check nuts and washers of galvanised iron all as shown in electrical plate No 3 of MES SSR Part I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber, MS frame and cover 6 mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM (weight not less than 4 Kg per Sqm) with cast iron frame, funnel with wire mesh, GI watering pipe 20mm dia medium grade and lugs complete all as specified and/or as directed by Engr-in-Charge.
M/S SHAMSHER ALI SUFI (BID ID -3473921)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
Tender2ndCallL1802526.pdf
Tender Documents • 1.17 MB
BOQ_826030.xls
BOQ • 0.79 MB
Download all tender documents and submit your bid