Improvement of Conference Hall of Directorate of Textiles at Bhubaneswar

Amount

INTERIOR WORKS :

Providing and fixing conference table U type of 20'long, 2' wide & 2'6" ht with bottom partition and 4" bottom base made up of fire retardant ply board and block board any approved make, exposed member as per drawing table top to be finished with 6mm thick Corian board front & inner side to be finished 1mm approved laminate of approved make. including all fittings & fixtures complete as direction of Engineer in-charge.

Providing and fixing of 6mm thick Corian board of approved make on existing conferance table top. including all fittings & fixtures and dismantaling of table complete as direction of Engineer in-charge.

Providing & fixing of suspended ceiling system with primafine fissured microlook tiles(Armstrong) of size 600X600 mm with humidity nesistance of 99% silfutte reavel profile grid system with 3mm or 6mm centre recess,Main runner should be placed at 1200 mm securely fixed to structural to fited by approved hanger forming a grid of 600mmX600mm with all hardwares & labour charges complete as per the direction of the Engineer in-charge.

Providing & Fixing of wall peneling with BWP Block Board/ply laminate with anyLaminart/vinear/mirror etc. finished in all respect as per approved drawing & requirement complete as per direction of Engineer in-charge.

Supply fitting and fixing in position MAC blinds (handloom/handicrafts fabris customise ) complete as specified and directed Engineer-in-Charge.

Providing and fixing of factory made UPVC 2-track sliding (white colour) complete,comprising UPVC multi-chambered frame 60 mm of size 67x54 with wall thickness of 2.3mm having in built roller track on top complete in all respect as direction by EIC

Brick work withFly ash bricks 25 cm x 12 cmx8cm size having crushing strength not less than 75 Kg/cm2 with dimensional tolerance +8 percent in cement mortar (1:6) in Superstructure including cost, conveyance, royality etc complete as direction by EIC.

Painting two coats to the wall surface by using 100% premium Acrylic emulsion paint to interior wall (distmper)surface over a coat of primer with water bond cement primer including finishing the surface smooth by sand papering in all heights etc. complete in all respect.any approved shade including cost conveyance royality etc complete as per direction of EIC

Providing and fixing of 12mm toughened glass door fixed by patch fittings/Wall connecting profile base rail with fixing holes incl. clamping parts with screws and gasket for 12 mm glass with cover profile on both sides. This is also inclusive of providing pattern with stickers, sealant, lock etc. as per the detail design and specifications direction of Engineer in-charge.

ELECTRICAL WORKS

Wiring for Circuits and Submain with following number & sizes of PVC insulated 1100 Volt Grade Multistranded Copper Conductor FRLS Wire run inside 2 mm thick PVC Conduit Pipe Recessed in Ceiling / Column / Walls of Building including supply of all materials such as wires, PVC Conduit, Junction Box & Pull Box etc. complete with making good the damages caused as required and as per Direction of Engineer-In-Charge. MAKE:FINOLEX / V GUARD / POLYCAB / HAVELLS

2 Nos. Single Core 2.5 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 1.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD (from LDB to Room & Power Point and Common Light Point looped).

2 Nos. Single Core 4.0 mm2 Copper Wire for Phase and Neutral and 1 No. Single Core 2.5 mm2 Copper Wire for Earth Continuity Conductor as per SLD.

Supply, delivery, installation and testing of following types of LED lights with Fixtures Directly on Wall / Ceiling of Building with all accessories. complete assembly and making connection from the suitable point outlet as per the Direction of Engineer-In-Charge.MAKE: HAVLOCK/ PHILIPS/ JAQUAR/BAJAJ

40 watt Sq celling lights

Supply, delivery, installation & testing of Sweep & Speed Fan including loop connections and making good the damages caused complete as required and as per direction of Engineer-in-charge.

Provision for Handloom motives with propoer frame work hanging on wall including all fittings & fixtures complete as direction of Engineer in-charge.

PRIYABRATA SAHOO (BID ID -2990713)