Renovation and Repairs, internal painting, vitrified flooring,false celing and elctrical wiring of 30 classrooms and passages of various department in the Institute.

Removing the existing cement plaster of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete.

Treating rising Dampness (Capilari action) in masonry wall using low pressure pump and injecting an alkali ,silicon,silicone or stearate fluid into holes of 16 mm dia with 200 mm length drilled into walls at spacing of every 9 inches .Fill the holes with polymer modified mortar .Finish the mortar joints between the bricks masonry etc complete.

Providing internal / external 20 mm thick Ready Mix plaster confirming to IS:4031(Part?4) 1988 and IS 383-1970 in a single coat using Cement mortar of proportion 1:4 containing special type of polymer additives about 0.4%, to all type of surfaces in all positions including scaffolding and curing etc.complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etc. complete.

Providing & applying anti corrosive treatment to exposed reinforcement portion of beam/ column with one coat of alkaline Rust converter feovert/ rusticide or equivalent on exposed reinforcement after celaning the surface with wire brush, followed by two coats of anticorrossive epoxy based two component zinc rich primer MasterEmaco P 130 of BASF phenolic IPNET RB/ Polyalk flxoprime or equivalent rebar protection coating on exposed reinforcement and concrete penetrating corrossion inhibitor EPCO KP-100/ POLALK EP 113/ Masterseal 1414 of BASF/ FOSROC or equivalent over adjoining concrete surfaced

Providing & applying of bond coat approved epoxy resin master brace 1414 of BASF/ EPI bond of krishna conchem/ or equivalent before polymer plaster/ concrete to have the perfact bond between old concrete and new concrete/ polymer plaster surface within half and hour of after application of bond coat conforming to ASTM C 881 Type 2, using nylon brushes scaffolding labour etc. complete

Providing & applying Ready mix polymer modified cement mortar of average thickness 15mm using polymer in one or more layers in proportion 1:5:15 of polymer cement quartz sand as manufacturers specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc complete

Providing & applying Ready mix polymer modified cement mortar of average thickness 30mm using polymer in one or more layers in proportion 1:5:15 of polymer cement quartz sand as manufacturers specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc complete

Providing and laying in situ / ready mix M35 grade concrete for RCC jacketing work around the existing column by providing reinforcement, shuttering, proping, curing complete.

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Dismantling and disposal of existing ceiling, furniture, partition and other unwanted material and staccking the same as directed by Engineer In charge.etc complete.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Removal of debris including loading and unloading on approved dumping ground by truck for the lead of 50 kilometers.etc complete.

Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Minimum Thickness of vitrified tiles 8 mm and base price Rs.608/- per sq.m (Clasroom flooring)

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.(for passage) Minimum Thickness of vitrifiedrustic matt stone finish tiles 8 mm and base proce Rs.1005/- per sq.m

Providing and applying interior wall finish luster of approved make on internal wall surface and ceiling as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (with Texture finish on one wall of classroom as per design given by engineer incharge)

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc. complete. For Flooring

Providing and fixing Modular false ceiling of 600 x 600 mm center to center and 13 mm thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 mm) flanges weighing 0.19 Kilogram/m suspended on 6 mm dia mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 mm x 40 mm) weighing 0.39 Kilogram/m etc. (all alluminium sections shall be anodized) including all labour, material, lifts etc. complete.(for Classrooms) Base price of mineral fiber board Rs.1062/- per sq.m

Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.(for internal passage with coloured decorative LED strips) Base price of Gypsum board 12.5 mm thick Rs.238/- per sq.m

Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting with epoxy paint etc complete.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts,chromium plated fixtures and fastenings, with brass mortise lock, chromium plated 0handles on both sides, and finishing with French Polish etc. complete.Base price of of solid core flush doors Rs.1050/- per sq.m

Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing /moulding the sharp edges wherever necessary, curing, etc. complete.Base price of green marble Rs.1303/- per sq.m

Removing the existing oil paint from doors and window surfaces upto the original wood surface by using flame and grinder etc complete. The surfaces should got approved from Engineer in charge before applying malimine polish.

Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete.

Providing and applying priming coat over new/old steel and other metal surfaces including preparing the surface by thoroughly cleaning oil, grease, dirt and other forien material paper, scaffolding etc.complete

Providing and applying two coats of synthetic enamel paint of pproved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary,cleaning and preparing the surface (excluding primer coat) etc. complete.

Providing antitermite treatment to the sides of flooring of the existing building as per I.S. 6313 (Part-III) by punching holes 6mm dia. drilled at a distance of 30cm. centre to centre and injecting one percent of chlorodane emulsion concentrate at the rate of 50 ml per hole and sealing by filling putty etc. complete covering 2 years guarantee on bond paper.

Providing antitermite treatment as per I.S. 6313 (Part-I) to the flooring of classroom along the internal wall surface /wooden partions etc of building by punching holes of 1.2 of 1.5 C.M. diametre about 30 cm deep at 15 cm c/c as close to the wall as possible and to inject 0.5 percent of aldrin or clorophyrifos at the rate of 7.5 litres per hole and sealing the same with proper filling and covering 10 years guarantee on bond paper.

Providing antitermite treatment to the wooden frames of doors/windows of the existing building as per I.S. 6313 (Part-III) by drilling 6mm dia. holes at four corners on one side and four corners on other side at a downward angle of about 45 degree at the junction of wood work and masonary and injecting 150 ml. of chlorodane 5% W.C. and sealing by filling putty etc. complete covering 2 years guarantee on bond paper.

Providing & fixing roller blackout blinds for windows having sturdy aluminium top ube of 38mm diameter, powder coated bottom bar, with suitable roller clutch mechanism and plastic ball chain, Fabric thickness – 0.43 mm +-5% & Weight - 393 gsm (± 5%) d) Width - 300 cm e) Colour fastness - Grade 6 ,The control clutch drive unit engineered a heavy duty chain drive pulley operating system consisting of gear clutch housing and locking plug containing minimum 6 ribs and inserted at minimum of 38mm into the roller tube. It is a self lubricating exclusive clutch with safety pins for secure bracket installation and unlocking pin for quick manual removal. Ball chain shall be 2mm diameter cord with plastic balls moulded to form an endless ball chain etc complete.

Refurbishment of existing benches by providing (6mm BWR plywood +2mm laminated veneer at top, side and fron face with bead patty), finishing with wood putty and synthetic enamale painting to steel rod / wooden supports/ reamaning area of bench [Bench top 1.35 m x 0.35m, seating 1.3m x 0.3m, back 1.35 m x 0.2 m)

Providing and fixing decorative teak plywood veneer lining 4 mm thick with backing teak wood frame work of battens 12 mm X 25 mm at 30 cm center to center fixed to walls and pillars with 12 mm thick BWR phywood building without skirting and cornice as per drawings including necessary iron work and finishing the exposed wood work with french polish etc. complete.

Repairing existing teak wood door and windows including fixing new tower bolt ,Glass panes,handles etc complete.

Point wiring for independent plug, concealed type in min 20 mm ISI marked HMS PVC conduit with 1.5 sq.mm (2+1E) FR grade copper wires, modular type switch and socket, earthing and required accessories as per specification No WG-PW/SW.

Supplying and erecting flush type shockproof plug socket 6A & 16A (6 pin) with 16A switch combined with indicator lamp and fuse with gang box on wooden board.Make /brand (Roma/legrand,/Greatwhite)

Providing and fixing 36 watt 2'X2' light fiting Supplying and erecting square shaped CRCA /die-cast aluminium powder coated housing LED panel light (slim edge-lit) 600x600mm suitable for 36 W-40W including motion sensor LED light with provision for plane front frame with translucent cover fixed to the housing etc.complete.Brand Philips/Havels/Wipro

Supplying and erecting regular/ standard model ceiling fan of 1400mm with sweep complete erected in position as per specification no. FG-FN/CF Brand Crompton/Orient/Polycab

Point wiring for light/fan/bell hybrid type (Surface type under false ceiling and concealed type for drops & switch boards on walls) in min 20mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FR grade copper wires,modular type switch, earthing and required accessories as per specification No: WG-PW/HW

Supplying and erecting 16 to 32 A DPMCB suitable to fix in 2 module of modular switch in provided box complete & duly concealed with necessary material and connected

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.etc complete Brand : Crompton/Orient/Polycab

Supplying, erecting & terminating XLPE armoured cable 3 core 4 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU

Supplying and erecting PVC Surface modular double mounting plate 8 modules complete duly erected etc complete. (BrandRoma/gretwhite/collar)

Supplying and erecting PVC Surface modular double mounting plate 3 modules complete duly erected etc complete.(.Brand Roma/gretwhite/collar)

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections etc complete..Brand Roma/gretwhite/legrand)

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections etc.complete. Brand : Roma/gretwhite/legrand)

Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia. as per specification No: WG-MA/PC.etc complete. (Brand polycab/Finolex/havels)

Supplying and erecting LED Mirror Light with integrated driver including 14W to 18W lamp with polycarbonate housing and opal diffuser to be fixed above mirror or as required on clamps etc.complete.Brand /Manufacturer - Glassmirror/HK art glass/life art/Sk enterprises.

Supplying and erecting LED square / circular 13 to 15W down lighter having pressure die-cast aluminum housing,opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type etc.complete.( Philips/havels/wipro

Supplying and erecting corridor/Passage light fitting (2 feet) including 18W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board etc. complete (Brand :Philips/havels/wipro)