Raising of Transformers Bed and Two Pole HT structure at different spots at Nowgam-B (Scheme Code - FINDC2324100055)- (District Capex Budget 2023-24 - DDC Grants)

Amount

Supply and Erection of ST Pole 9 mtr. long (ST-410 SP33) with Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply and Erection of ST Pole 8 mtr. long (ST-410 SP15) with Galvanised Channel Iron Earthing Arrangement as per Drawing CE/P&P/Dwg/2022-STP-E0001 attached including loading from factory unit, its carriage and unloading upto site (Poles shall be got tested at the cost of bidder prior to its delivery at site for erection)

Supply, Laying, Testing and Commissioning of 0.1 ACSR Conductor

Supply, Laying, Testing and Commissioning of 0.05 ACSR Conductor

Supply, Laying, Testing and Commissioning of 0.03 ACSR Conductor

Providing, Fabrication and Fixing of GI Channel of sizes (100x50x6mm) (75x40x6mm) and GI Angle Brace with back clamps / Pole collar of sizes as per approved drawing (for sub-stn frame and transformer bed) (Dimensions as per Sub Station drawing attached)

Supply, Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 kV, 10 kA, LA with polymer housing, Stn. Type

Supply, Installation, Testing and Commissioning of 11 kV GO, AB Switch 3-Phase, 3-Pole, 200 Amp, Vertical Type including pipe, handle, pad lock etc including its earthing using 25x3 mm strip (strictly as per drawing attached)

Supply, Installation, Testing and Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200 Amp (strictly as per drawing attached)

Providing and Fixing of Galvanized Nuts and Bolts of sorts

Providing and Fixing of Solderless clamps (250 kVA)

Providing and Fixing of Solderless clamps (500 kVA)

Providing, Fabrication and Fixing of Pole Post fabricated from MS Pipe Post 10' long having 6'' dia with proper sized end plates (for supporting bed structure) including proper paint (red oxide/aluminium paint/tractor orange) and Cemet Bottoming (0.25 cum)

Providing and Fixing of LT fuse set comprising of requisite aluminium bus bar mounted on LT polymer insulator assembled on galvanized channel iron frame including necessary clamps (Strictly as per drawing attached)

Providing and Fixing of 11 kV Polymer Pin Insulator 12 kV, 5 kN, Lighting Impulse 75 kV Positive and 80 kV Negative, creepage distance 320 mm

Providing and Fixing of 11 kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm with fittings

Providing and Fixing of LT Shackle Insulators 16 KN 100 mm

Providing and Fixing of GI Muki Clamp (Complete) of 50x8 mm galvanized flat iron having end inner dia 18 mm for Shackle Insulators suitable for ST Pole with back clamp and galvanized nuts and bolts

Providing and Fixing of 11 KV/440 V Danger Plate with Clamp

Providing and Fixing of Anticlimbing Device using GI Barbed wire with end Clamps (2 kg Barbed wire per job/pole with 2 G I clamps with GI nuts/bolts and washers)

Providing and Earthing of ST Poles 9/8 mtr long using GI Pipe 40 mm or GI Rod 20 mm 2.5 mtr long through GI Strip.

Providing and Layng of Cement Bottoming of ST Poles 9 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.5 cum/pole)

Providing and Laying of Cement Bottoming of ST Poles 8 mtr long in the ratio 1:2:4 Mix as per approved drawing (0.45 cum/pole)

Supply, Laying, Testing and Commissioning of 300 sqmm single core Cable,1.1 kV Grade, XLPE Insulated Stranded Conductor (unarmoured) FRLS type

Providing and Fixing of Aluminium Thimbles 300 mm sq

Dismantling, Shifting and Re-Commissioning of existing Distribution Transformer on new Sub Station frame structure using hired crane/hydra

Providing and Laying of Earthing of substation Complete with all accessories --Excavation of earth pit of dia 650 mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as Per IS 1239. Interconnection of 3 earthing pipes by 50x6 mm GI Flat. GI Strip of size 25 mm x 3 mm for neutral earthing (Two distinct connections) / connection of transformer body and LA. Earth pits to be refilled with earth enhancement materials and earth chamber made of brick masonary with RCC slab cover besides 8 SWG GI Wire connections for Transformer body, LT Distribution Box (2 distinct connections) and earthing terminal of Poles (Description as per Approved Drawing Tiltled Earthing for 100 kVA DTR on 9 mtr poles-CE/P&P/Drg/2022DTR007)

Providing and Painting of ST Poles 9/8 mtr long with 1 coat of Red Oxide and 2 coats of Aluminium Paint

Dismantaling of old PCC/ST DT structure complete (poles/channels/ link set/ DO set etc) with all accessoies and returnable to Divisional Stores at Bemina

Providing/Submission of Both Pre and Post Work Execution Geo-Tagged Coloured Photographs of subjected work on A4 sized photopaper (2 pic per page -Pre and Post)

Heaven Electricals

M/S R R ELECTRICAL SERVICES

M/S INTERNATIONAL STORES

UBAID SUPPLIERS AND CONTRACTORS