CERTAIN REPAIR/MAINT OF SEWAGE LINE, MANHOLES INCLUDING CONNECTED ITEMS AND MISC MAINT BOUNDARY WALL, PATH ETC TO OFFRS MD ACCN/ OFFRS MESSES/ MES IB/ COMMAND HUTS/ CENTRAL AMENITIES/ CPG AT MALL ROAD, POLO ROAD, PARADE ROAD, URBAN VILLAGE, HQ DELHI

Amount

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

All same as per srl item No 2 here -in-before but except bricks, complete all as specified and as directed.

M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

All same as per srl item No 4 here -in-before but except bricks, complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M & L for 15mm thick rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces and finished even and fair in any position incl scafolding as required etc, complete all as specified and as directed.

M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and fair complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely).

Supply only liquid water proofing compound complete all as specified & directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundations etc or for shafts, wells cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in- Charge.

Excavation in trenches n.exc 1.5 M wide and exc 1.5 M but n.exc 3.00 M in depth for foundations etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 Sqm on plan and in depth and getting out in soft/loose soil complete all as specified and directed.

Returning & filling including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removal of excavated material n.exc 50 mtr and depositing where directed at level not exc 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up 150 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

Demolition and breaking up 200 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

Demolition and breaking up 300 mm dia drain pipes (SGSW/ AC/RCC) including hunching and benching set in cement mortar and removal of debris out side from MoD land complete all as specified and as directed.

M & L for 150 mm bore of RCC hume pipe class NP2 laid and and jointed complete with colleres and laid in trenches with laying pipes level and tested complete all as specified and as directed.

M & L for 200 mm bore of RCC hume pipe class NP2 laid and and jointed complete with colleres and laid in trenches with laying pipes level and tested complete all as specified and as directed.

M & L for 300 mm bore of RCC hume pipe class NP2 laid and and jointed complete with colleres and laid in trenches with laying pipes level and tested complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 150 mm (internal dia) mm including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

S&F DWCPE (SN8) nominal size 200 mm (internal dia) including all fixing accessories or fittings like socket/spigot joint with elastomeric sealing ring, rubber ring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

Supplying, laying in trenches, jointing and testing salt glazed stoneware pipe grade 'A' drainpipe 150mm bore conforming to IS at any depth over PCC bed complete all as specified & directed

All same as per srl item No 22 here -in-before but drain pipe of 200mm dia all as specified and directed.

M&L Cutting opening in PCC floor (surface area not exceeding 0.09Sqm each hole) and removing materials in sunken floor filling, repairing/replacing the nahni traps/floors traps using quick setting cement and filling back in the sunken floor portion using with PCC 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) including provision of non skid ceramic coloured tiles 300mm x 300mm x 7mm thick in flooring over 10mm screed bed in cement mortar 1:4, complete all as specified and as directed at site by Engineer-in-Charge. (Note : Nahani trap/Floor trap shall be measured and paid seperately)

M&L Cutting shrubs wild gorwth/trees and removing complete vegetation growth from walls including taking out roots from roof/brick work or concrete surfaces and making good the distrubed surfaces with PCC 1:2:4 type B-0, using 12.5mm graded crushed stone aggregate and disposing the rubbish from the site (MOD land) for a block up to 9 storey, complete all as specified. (Note : Rate in this item include cutting tress and shrub in each block any number of time during the currency of contract.)

M&L Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm bore drain pipe complete all as specified and as directed.

M&L Cutting in to existing manholes for connecting new drains, making good to pipe & rendering cutting out existing benching for and forming branch channel in cement concrete1:2:4 type B-1 smooth finished and reforming benching as required for 200 mm bore drain pipe complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm grade stone aggregate) as in bed to drain pipe 150 mm bore including forming cradles complte all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm grade stone aggregate) as in bed to drain pipe 200 mm bore including forming cradles complete all as specified and directed.

M&L for PCC 1:4:8 type D2 (using 40 mm grade stone aggregate) as in bed to drain pipe 300 mm bore including forming cradles complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) bedding for sewage lines of 150mm dia incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) bedding for sewage lines of 200 mm dia incl packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed.

PCC (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in brenching for manholes, bands, coping, bed plate etc with slightly chamfered or rounded angles including necessary from work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified & directed.

M & L for PCC 1:2:4 type B-2 using 20mm graded stone aggregate as in surface channels and drains all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type D-2 using 40mm graded stone aggregate as in foundation etc, complete all as specified & directed

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in strirrups, spaces and binder and including mild steel wire (annealed) not less than 0.9mm dia etc complete all as specified and directed by Engr-in-Charge.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for etc complete.

M & L for form work to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams: and similar works; vertical or to batter for flat rough finished surfaces complete all as specified and directed by Engr-in-Charge.

M & L for form work to sides of pillars, posts, struts, piers, columns and stanchions size of square, rectangular or polygonal for flat rough finished surfaces complete all as specified and directed.

M & L for RCC M-25 design mix as in foundation, including rafts , footings , foundation beams, plinth beams; bases for columns, etc ; basement slabs, under- reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge.

M & L for RCC M-25 design mix as in columns, pillars, piers, posts and struts etc complete all as specified and directed by Engr-in-Charge.

S&F Precast SFRC square or rectangular manhole covers 75 mm thick with frame medium duty conforming to IS-12592 including demolition of existing slab covers, including necessary reinfocement, complete all as specified and as directed.

S&F Precast SFRC square or rectangular manhole covers 100 mm thick with frame medium duty conforming to IS-12592 including demolition of existing slab covers, including necessary reinfocement, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floor or in any position and paving not exc. 15 cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tilling , granite, stone cladding , interlocking etc including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing completed all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floors, plinth protection, Path etc (finished even and fair) laid in panels complete all as directed by Engr-in-Charge

M & L 18 to 20 mm thick granite (colour as approved by GE) of any type work table rubbed and polished as in steps, jambs, pillars, window cills, platform, water point platforms , floor etc over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching and moulding complete all as specified and as directed .

S & F for wall cladding tiles of size 300mm x 600mmx 8-12mm thick on vertical surfaces of wall , such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick screed bed in CM 1:4 and as per sample approved by GE complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 60 mm thick, M-35 Grade laid dry in floor/path including 50 mm thick sand bedding layer complete all as specified and as directed.

M & L for Machine pressed precast conctete interlocking paver block of any shape and size (Two colour combination) conforming to IS 15658-2006 of 80 mm thick, M-35 Grade laid dry in floor/path including 50 mm thick sand bedding layer complete all as specified and as directed.

M & L for Pre- Polished coloured chequered cement concrete tiles 300 mm x 300 mm x 22- 25 mm thick, set, jointed and pointed in neat cement slurry over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M & L for OUT DOOR coloured ceramic chequered tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 complete all as specified and directed.

M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:4 complete all as specified and directed.

Dismantling old posts or struts ( wood, steel or RCC) any section, including taking out embedded portion and making good and excavation & prepration of post holes removal of surplus excavated material completed all as specified and directed

Excavation in post holes (or similar holes) in soft/loose soil each not exceeding 0.5 cum getting out, returning, filling in ramming earth or broken rubble in layers not exceeding 25 cm, watering and removing of surplus soil to a distance not exc 50m and making good surfaces, complete all as specified and as directed.

M & L for mild steel work , Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including erection in ground complete all as specified and directed.

S&F Mild steel screw bolts 5 to 10 mm dia ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , n exc 5 cm long complete all as specified .

S & F expanded metal n .exc 4 kg/sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

S & F Chain link MS galvanisd fencing any size or type ( approved by GE) including line wires, any mesh, size and type to any of standards , rails , staining bolts, etc including provision of bindings wire complete all as specified and directed.

Taking down and dismantling of old wire fencing (expended metal, MS galvanised fencing) nexc 4Kg/sqm complete all as specified and directed.

Taking down and dismantling of old barbed wire fencing complete all as specified and directed.

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed.

Refixing old galvanised. steel barbed wire restraining resecuring including making good staples or steel pins, etc. as directed (each line wire to be measured) complete all as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F framed work such as in door frame, door shuters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.

S&F steel work in tubular trusses, doors , posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed

S & F Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and as directed.

Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated AC sheeting any gauge thickness as in roof covering, complete all as specified and as directed.

S & F for 2 mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or crancked hook bolts including dismantling of of existing sheeting of any type, complete all as specified and directed.

S & F Aluminium Composite panel (ACP Sheets colour as approved by GE) of 3/4 mm thick joint with cilicon/ adhesive as per manufacturer instruction including necessary aluminium framed work as required shape and size by welding etc fixing to wall / ceiling/ RCC column/boarding/Gates/Name Plates on gates with necessary fixing arrangements upto a height of 10 Mtrs including dismantling of existing sheets of any type complete all as specified and as directed.

S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 50 mm thick ( design and patern as approved by GE) set in CM (1:4) including all mouldings but excluding frame fixed over bdy wall or walk ways or in any position etc complete all as specified and directed.

S & F in repair precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

S & F in repair precast RCC post/ piller of size 100x100x750 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

Dismantling of PVC eaves gutters/rain water pipes/drain pipe of size 75mm to 110 mm fixed in walls/floors at any position with all fittings, complete all as specified and directed.

Dismantling of Cast Iron/RCC drain pipe of size 75mm to 110 mm fixed in walls/floors at any position with all fittings, complete all as specified and directed.

S&F PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, fixed in walls, complete all as specified & directed.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, fixed in walls, complete all as specified & directed.

S&F in repairs of Stack clamps for 75mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed.

S&F in repairs of Stack clamps for 110mm bore of pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and ecuring ends of stays to wall or roof, complete all as specified and directed.

S&F in repairs of 110mm bore of PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete all as specified and directed.

S&F in repairs of 75mm bore of PVC (SWR) branch piece, single (Single Y) equal or unequal with aceess door, complete all as specified and directed.

S&F in repairs of 110mm bore of PVC (SWR) vent cowl, complete all as specified and directed.

S&F in repairs of 75mm bore of PVC (SWR) vent cowl, complete all as specified and directed.

M&L in repair 75mm bore PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F Sand cast iron soil waste and vent pipes 100mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F Sand cast iron soil waste and vent pipes75 mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floor complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling is included in Quoted rates.

S&F CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

S&F CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.

S&F CI Branch pieces 75mm bore with access door , single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches complete all as specified & directed.

S&F CI Branch pieces 100mm bore with access door , single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches complete all as specified & directed.

M&L in repair 75mm/100 mm bore CI bend any type all access door including jointing with cement complete all as specified and directed.

S&F CI Branch pieces 75mm bore with access door , single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches complete all as specified & directed.

S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge .

S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap , seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.

S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed

S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

M & L for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required (Size and pattern as approved by GE) and including dismantling of old existing kerb stone of any type and size etc complete all as specified and as directed.

M/L for cleaning/de-silting of loose mud, rubbish etc from drain bed including uprooting of vegetative growth throughly and wire brushing including flushing with water so as to achieve smooth flow of water in drain of bed width up to 60 cm and any depth etc complete all as directed by Engineer in charge.

M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.

M & L for preparation of old Steel and Iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as Specified and directed.

M & L for preparation of new surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying two coat of cement base paint complete all as specified and directed

M & L for preparation of old surface decorated brick/concrete/ plastered or unplastered surfaces of walls, pillars, cornices by brooming down etc and applying one coat of cement base paint complete all as specified and directed

M & L for preparation of New/ old surface of stone, concrete of any description over 10 CM width or grith and applying two coat of plastic emulsion paint (colour and patren as per approved by GE ) complete all as specified and directed.

M & L for two coat of floor paint on any type of surface including prepration of new/old surface make ;- Indigo floor paint and or equivalent as approved by GE) complete all as specified and directed.

Cleaning of sewage line.Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. ( NOTE : In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 500/- per day shall be deducted from his payment.)

Cleaning of sewage system including WCs, WHB, bottle traps, nahani and floor traps, soil/waste/rain/drain pipe running on external walls/cancealed type of building including junctions, manholes of any description and sewage lines of all sizes upto the final drop out let into septic tank/soak well of central sewage/drain wihtout distrubing its running/flowing and removing all type of blockages in any situation by mechanical means, and disposing waste materials out side defence land strictly as per Hon'ble Supreme Court directions, complete all as specified and as directed by the Engineer-in-Charge. NOTE: a) The above task shall be caried out by deploying a team, comprising 06 safaiwalas, for Offrs Md Accn , Messes/MES IBs / Command Huts / Central amenities at Mall road, Polo road, Parade road,CPG, Urban village, HQDA, Mandir marg, Tigris road, Church road, Manekshaw marg, Cassel road and other minor units. b) Where there is requirement of work involving scaffoldings and jhula, Contractor shall deploy the additional skilled team of workers expert in working on jhullas in high rise bldgs. c) If contractor fails to attend/clean a given complaint (received on any working days till 6 PM) on the same day, is liable to be charged Rs 500/- per day per complaint. Recovery for same will be deducted from his payment. d) One mechanical pump diesel/petrol for dewatering sludge water, safety belt, ladder, gloves gasmask, bucket to remove sludge, mechnical device required to reach work at difficult locations upto 9 stories shall be made available all time at site. e) The work mentioned in above items shall be carried out including multi storied buildings (G+8) which may required scaffolding or jhulla arrangements or any other T&P items are included in the quoted rates by the contractor.

Sanjay Associates

STAR CONSTRUCTION CO

Vipul Construction

A R construction

MAA SANTOSHI ENTERPRISES

sunil traders

PG CONSTRUCTION AND COMPANY