Constructing Head Regulator of Rana Link Channel off taking at RD 42450/L of Nizamwah Disty

Dismentling of Brick Masonary in 1:3 CSM

Dismentling of Coping

Excavation in soil (any type) using hydraulic excavator CK 90mand tippers with disposal upto 60 mtrs. Excavation for road work in soil with hydraulic excavator of 0.9 cum bucket capacity i/c cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross section and transporting to the embankment location within all lifts and leads up to 60 mtrs

Earth Work excavation in trenches

Rehandelling of earth work

Laying cement concrete 1:3:6 Nominal mix in foundation with crushed stone aggregates 40 mm. nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days

Laying Ist Class Burnt Brick Masonary in 1:3 C.S.M upto 1.50 Mtr height in Foundation and Plinth i/c supply & C/o material complete in all respect.

Laying Ist Class brunt Brick Work laid in 1:3 C.S.M above1.50 meter height upto 4.00 meter height i/c carriage and cost of material complete in all respect

Reinforced Cement Concrete M-25 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture.

Reinforced Cement Concrete M-20 in sub Structure complete as per drawing and technical specifications height upto 5 Mtr. using concrete mixture

PCC M-15 Cement Concrete in Sub Structure Complete as per drawing and technical specification using mixture.

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-1985 for R.C.C. works, where not included in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Supply and fixing of iron Rungs

Laying Cement plaster 10mm thick in 1:3 CSM

Supply and Laying of Sand (Local Sand)

Making Sirki Sarkanda temperory godown 3mtr. x 3mtr. With walls 2.5 Mtr. Height 1.5 brick thick burnt bricks laid dry excluding cost of bricks but including cost of other material.

Poviding installation &fixing in postion spindle hoist assembly at site complete all respect to entir satisfaction of engineer-in - charge

Providing and fixing Side Rubber Seal

Providing and fixing Bottom Rubber Seal

Providing and fixing Side seal clamp plate M.S. Flat 30x6 mm

Providing and fixing Bottom seal clamp plate M.S. Flat 68x8 mm

Providing and fixing Horizontal Stiffender In Deck frame Girder ISMB - 150

Providing and fixing Horizontal Stiffender In Deck frame Girder ISMC - 125

Providing and fixing Vertical Column to support the Deck ISMB - 150

Providing and fixing Angle ISA - 65x65x6

Providing and fixing Railing Pipe

Providing and fixing Sill Girder ISMB - 200

Providing and fixing skin plate

Providing and fixing Horizontal Stiffender Girder ISMC - 125

Providing and fixing Horizontal Girder ISMC - 125

Providing and fixing Vertical Stiffender Girder ISMC - 150

Providing and fixing M.S Plate 6 mm thick

Providing and fixing M.S Plate 8 mm thick

Providing and fixing M.S Plate 12 mm thick

Providing and Fixing Anchors

Providing & Fixing of S.S Plate 80x8 mm

Providing and Fixing Chequered Plate

Providing and fixing M.S Plate 10 mm thick

Painting two coats anticorrosive ordourless black bitumastic paint inside steel water tanks with special quality paint.

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work with special quality paint

Extra for bitumen painting (Priming Coat)

Providing and Fixing the C.S.K Screw

Providing and Fixing the Brass Flate

Commissioning and Testing of Gates at Site Complete in all respects and to entire satisfaction of engineer-in-charge

Supply of Multipurpose syn, hetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge

Any Other Item

M/S Sanjeev Sehgal Contractor