PROVN OF 01 X TRAINING INSTRUCTION ROOM, STORAGE SHED FOR ORDNANCE STORES AND OTHER SANCTIONED WORKS AT AMRITSAR CANTT

Amount

B/R PORTION Surface dressing n exc 15 cm deep in soft/loose soil

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil and getting out complete all as specified and directed.

Excavation over areas, n.exc 1.5 mtr in depth and getting out in any type of soil and all as specified & directed.

All as item No 02 but depth exc 1.5 m and n. exc 3 mtr and getting out in any type of soil and all as specified & directed.

All as item No 02 but depth exc 3.0 m and n. exc 4.5 mtr and getting out in any type of soil and all as specified & directed.

M & L for excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm

Returning, filling in and spreading in layers n. exc 25cm thick each layer including watering & well ramming complete all as specified& directed.

Removing surplus spoil to a distance exceeding 50 meter and nexc 250m depositing where directed at a level not exceeding 1.5 meter above the starting point , complete all as specified .

M&L for Earth Filling in floors using surplus excavated soil Spreading and levelling in layers n exc. 25 cm thick and rammed including watering

M & L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete.

M&L for PCC 1:3:6 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast, roof kerbs or mud stops, rounded or chamfered on edges & similar work etc complete all as specified and directed

M & L for 75 mm thick, PCC 1:4:8 Type D-2, using 40mm graded aggregate as in Sub base for flooring complete all as specified and as directed.

M & L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M &L providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in surface of channel,drain,benching copings, apex stones, bed plates, kerbs and PCC bend for top of manhole brick work etc with slightly chamfered or rounded angles including necessary form works , if any and finishing exposed suface even and smooth without using extra cement etc complete all as specified and as directed.

M&L for 50 mm thick cement concrete type C-1, 1:3:6 using 20mm graded aggregate as in plinth protection etc all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in column footings, plinth beams all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in columns all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in beams all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in chajja and fascia all as specified and as directed.

M&L RCC M-25 (Design Mix) using 20 mm graded stone aggregates as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M & L, Pre-cast cement concrete 1:2:4 type B-1 using B-1 using 20mm graded stone aggregate as in cover slabs for man holes etc., including necessary formwork, placed in position and set in cement mortor 1:4 complete all as specified, shown on drawings and as directed.

S & F mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips

S & F mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.

Fair finished flat form works to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Formwork to sides of fair finished flat surfaces of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Fair finished square, rectangular or polygonal form work to sides of pillars, posts, struts, columns and stanchions etc

Fair finished flat Form work to chajjas and similar items including edges

M & L Brick work built CM 1:6 subclass B brick strength curved or plan exc 6m mean radius.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cm 1:4

M & L Brickwork with subclass ‘B’ bricks in one brick thick honey combed walling built in cm 1:4

M&L for loose filling of brick bats of gauge 80 to 150 mm in soakage pits, soakage wells

S & F for mild steel works as in posts and struts including embeding in concrete and screwing etc, wind ties for roof including securing with bolts including cutting tops to shape as directed, drilling holes notching for wire etc, flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

S & F for structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy bracket framing , (Beam, Tee, angle, channel or flat sections) including distance pieces, cleats etc of Gde Fe-410 W (Gde-E-250) quality B

S&F Mild screw bolts ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut , exc 10 but n exc 15cm long

S&F for mild steel work as in fencing rod/ anchoragerod duly welded with weeping in fencing mesh of 10mm dia and welding etc complete.

S/F framed work as door, chowkhats, and Grill /gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges small articles such as rungs, handlels to manhole covers or steel hanging door fittings and hanging also festering and fixing complete.

S & F pre-painted galvalu aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ub roof covering / cladding to wall, fixed with self tapping screws as specified

S & F pre-painted galvalu aluminium zinc coating GI based plain steel sheet 0.50 mm thick as in ridge of approved colour having tensile strength of 550 Mpa as ub roof covering / cladding to wall, fixed with self tapping screws as specified

M & L for 60 mm thick Machine pressed precast concrete interlocking paver blocks of approved shape and size connfirming to IS-15658-2006 , of M-35 Grade over 25 mm sand filling including watering and consolidation etc complete all as specified

M&L for 15mm rendering in cement mortar (1:4) on brick/concrete surfaces finished the surface even and smooth without using extra cement.complete all as specified.

M & L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling finished the surface even and smooth without using extra cement.

M&L for glazed ceramic coloured tiles 450x300x7-8mm thick as in dado/skirting set and jointed in neat cement slury and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and as directed.

Preparation of Newly Plastered surfaces of Wall and applying Two coats of white wash all as specified and directed.

M&L for preparation of new ceiling surface and applying two coats of white wash all as specified as directed by Engr-in-Charge.

M&L for applying two coats of oil bound distemper on ceiling incl preperation of undecoared surfaces.

Preparation of Newly Plastered surfaces of Wall and applying Two coats of Oil Bound Distemper over a coat of alkali resistant primer all as specified and directed.

M&L for preparation of newly plstered wall surface and applying two coats of cement Base paint all as specified as directed by Engr-in-Charge.

M & L for two coats of synthetic enamel paint on painting steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new or previously untreated surfaces over a coat of red oxide, zinc chrome complete all as specified and as directed of approved tint/colo

Renewing tiles in patches, area n exc 5 sq.m. with glazed ceramic tiles as per site requirement including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete

M/L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM (1:4) all as specified.

S&F rotational moulded polythyene 1000 litrs water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl. 20mm dia float valve brass fitting. All as specified and directed

S&F rotational moulded polythyene water storage tanks (multi layer) capacity 500 liters (cylindrical vertical with closed top) with and including 20mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe hoisted, fixed in position and making connection including dismantling of existing unserviceable tanks Exc 250 Ltr and not Exc 500 Ltr complete all as specified

Taking up or down steel tubing and connection 15 mm bore of pipe complete all as specified and directed

Taking up or down steel tubing and connection 20 mm bore of pipe complete all as specified

S & F galvanised iron tubing, 15 mm bore medium graded, including all fitting and fixedcomplete to walls or ceiling or laid in floors complete all as specified and directed.

S & F galvanised iron tubing, 20 mm bore medium graded, including all fitting and fixed complete to walls or ceiling or laid in floors complete all as specified and directed.

S&F Stop valve of PTMT for 20 mm bore of pipe any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm92gms)

S & F Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).

S&F Angle stop valve of PTMT for 15 mm bore of pipe any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms

S&F concealed Stop valve of PTMT any colour high pressure with long shank and cup (concealed type), (Minimum weight 15mm-110gms/20mm112 gms) screwed for iron pipe and fixed.

S & F swivel Shower of PTMT any colour for fixing with 15mm pipe(min weight 40 grm) . Including shower arm

S&F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms

S&F in repair concealed stop cock 15mm dia bore chromium plated cast copper alloy with long shank and cup (concealed type) complete all as specified and directed.

S & F 125 mm brass chromium plated shower rose with CP arm fixed with 15 mm bore GI pipe complete all as specified and directed.

S&F in repair of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S&F brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass complete all as specified and directed

S&F 20mm bore dia gate valve, gun metal with iron wheel head, screwed both ends and fixed all as specified and directed

S & F stainless steel sinks , 1 mm thick, for kitchen with plugs,, washers, wastes including bedding in cement mortar on dwarf wall or on RCC slab including brackets as required and connecting to union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm

S & F 32 mm borre waste coupling of PTMT (half or full threaded ( min weight 45 gms)

Supply and fix 32 mm dia waste pipe for WHB and urinal

S&F PVC valveless , syphonic action flushing cistern 10 ltr capacity, low level, white, with inlet, ball valve , float and handle including brackets and PVC flush pipe complete all as specified.

S & F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe and 600mm long PVC connector 15mm) all as specified & directed by Engineer-in-charge.

S & F Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S&F Vitreous China urinals, halfstal type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement;

S&F PVC connections 15mm size with PTMT nuts of length 600mm

M&L PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S & F Grating doom 100mm dia with wast hole of PTMT (Min weight 25 gms).

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors or on wall

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors

S & F 110 mm bore PVC (SWR) bends of any radius.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door.

S & F 110 mm bore PVC (SWR) Vent Cowl

M & L, for 150mm dia reinforced concrete pipes, class NP3, laid and jointed complete with collars

Concrete bed to drain pipes including packing under, and hunching against the sides of pipes 150mm bore in cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) after they are laid and tested of pipe complete all as specified

S&F GI chain link fencing size of mesh (100x100mm) dia of wire 4mm to angle iron post, rails, straining bolts including provn of binding wire complete all as specified and directed.

S&F galvanised 2 stand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standered rails, straining bolts, including securing or tying at crossings with and provision of galvanised MS wire staples or steel pins at all as specified and directed.

Supply and fixing punched tape concertina coil 610mm dia made with high tensile strength galvanized mild steel wire 2.60 mm dia as per IS 4454 strip material (galvanized MS strip as per IS-1730) upto 3 metre height of wall with angle iron 'Y' shaped placed 2.5metre to 3 metre apart and with 9 horizontal R.B.T stud tied with G.I staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron with reinforced barbed tape (RBT)/ spring core (2.6mm dia) wire minimum barb 9mm width, loop spacing 250± 20mm, coil length 9mm and fixed in position , complete all as specified and directed. . Note :-(i) The make shall be got approved by GE confirming to the specification before procurement. (ii) Mild steel angle (Y-Shape) shall be measured and paid for separately.

Supply only integral water proofing compound

M & L for hardcore of gauge not exceeding 63 mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface in broken boulder complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing comple pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM (1:4) all as specified.

M&L for machine cut kota stone slab skirting / dado 20-25 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completings in dado/skirting set and jointed in neat cement slury and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified and as directed.

M&L for 18 - 20 mm thick machine cut kota stone of size 22" x 22" including grinding & polishing to achieve mirror finish over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors,staircase landing etc including rubbing and pollishing complete including 20 mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 18 - 20 mm thick machine cut kota stone of size 22" x 22" including grinding & polishing to achieve mirror finish laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in skirting/dado etc including rubbing and pollishing complete including 10 mm thick backing in CM 1:4 all as specified and directed.

M& L for Box type steel window double (glazed & gauged) emade of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, all as shown on drg No.CEJZ/TD-06/07 and CEJZ/TD/07/07 complete.

S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 primer coated complete all as spd.

S & F steel rolling shutter with ball bearing as specified, having 1.25 mm thick laths including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position a indicated, complete push pull or manual type

S & F for ball bearing for rolling shutters

S&F IInd class hardwood, panelled shutters 35mm thick (any number of panels) with panel of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified.

S/F 35 mm thick glazed and Skelton shutters IInd class hard wood open rebated prepared to receive in SSR part-I class 8 (R) glass gage dividing in squares size of member as per specified

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm colour PVC sheet, edges will be painted to match with colour sheet, reinforced with MS square tube & fixing in opening.

S & F Factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded colour PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading.

S&F butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised type C-21 all as specified.

S&F butt hinges medium weight cold rolled mild steel complete size 100mm

S&F extruded aluminium alloy handles, fabricated type, anodised all as specified of size 150mm long

S&F Aluminium, anodised, barrel tower bolts of extruded section all as specified of size 150mm long

S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.

S&F MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate Complete.

M&L two coats of synthetic enamel paint over a coat of pink primer over wooden surfaces including preparation fo surfaces complete all as specified.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exc 0.5 sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass pane ordinary quality glazing with oil putty not less than 0.5 sqm each pane complete all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanized wire staples.

S&F GI frame work for seameless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixe to surrounding wall using nylon sleeves and screws as 450mm centre to centr/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre.

Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified.

M&L Providing and fixing Gypsum board 12 mm thick in ceiling fixed with screw and filling joints with wallcare putty as per manufacturers instructions

M&L for ATT, Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

S&F Anodised aluminium (powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Supply and fixing aluminium powder coated glazed shutter(for doors) with style and top rail of section 80 x 44mm, 16 Gauge thick and bottom rails of section 112 x 44mm of 14 Gauge thick, middle rail 150 x 44mm of 16 guage thick fixed on floor spring, both side opeining without sash bars but including 5mm thick glass pane with 5 micron thick black film and necessary jointing cleats, rubber beading, anodized aluminium snap beading, screws, aluminium anodized handle, locking arrangement(mortised) and aluminuium anodised tower bolt 200 mm long complete all as specified. Note :- Floor spring shall be measured and paid separately.

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S & F aluminium powder coated three track B-series sliding window with 5mm glass pane with SS jalli along with good quality bearing,handle,lock,PVC rubber lining of size exceeding 1.5 Sqm but n.exceeding 04 Sqm each complete all as specified and directed. ( Ref CEJZ TD No CEJZ/TD-1026/08 sheet 1/1 dt 01 May 08, ALW 15)

S & F for Aluminium grill including frame (DG-916) complete all as specified and directed. ( Ref CEJZ TD No CEJZ/TD-1026/08 sheet 1/1 dt 01 May 08)

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm at 180 degree temperature in each layer ( first layer below APP membrane and second layer above APP membrane) on 0.40 kg/sqm bitumen primer surfaces including cleaning surfaces etc complete all as specified and directed

M & L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on bitumen surfaces by forced application complete all as specified.

M & L 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying APP membrane over rcc roof in CM (1:4)

E/M PORTION M & L Wiring complete with 1.5 sqmm single core PVC insulated unsheathed FR cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed : Make of FR wire; Polycab/Havells/RR Kabel. (a) One light point/Bell/Fan point controlled by one switch.

All as per item No 128 above but one 3 pin 5 amps switch socket on independent board.

All as per item No 128 above but one 3 pin 5 amps switch socket on same board.

All as per item No 128 herein before but with cable 2.5 sqmm (nominal area) multistranded copper wire unsheathed for one 3 pin socket outlet 15 amps on independent board including continous earth wirte PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed Note for items Nos 128 to 131 :- (a) The wiring shall be done in proper colour coding using red,yellow and blue for phase,black for neutral and green for earth leads.

Supply and fix switch piano one way 5 A, SP, 230 Volts.Make Anchor/Plaza/SSK

Supply and fix Socket outlet 2 in 1, 3 pin 5 Amps Flush type. Make Anchor/Plaza/SSK

Supply and fix Switch outlet 2 in 1, 3 pin15 Amps Flush type. Make Anchor/Plaza/SSK

Supply and fixing ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified.Make Anchor/Plaza/SSK

S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant/batten fittings complete all as specified and directed.Make Anchor/Plaza/SSK

Supply and fix stepped type electronic fan regulator flush type all as specified and directed. Make Anchor/SSK/Plaza

Supply and fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complet with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rod and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete Make : Wipro,havells ,CG.

Supply and fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal all as specified and as directed Make : Wipro /Philips/Havells or equivalent

Supply and fix in replacement of security light fitting LED 25 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with muyltistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed. Make Philips/Wipro/CG

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 2.5 sqmm including 1 run of 2.5 sq mm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Make of FR wire; Polycab/Havells/RR Cable,Make of PVC Pipe - Polycab/FInolex/Kalinga premium. Note : 2 Run of 2.5 sqmm, 1 Run of 2.5 sq mm and 1 run of PVC conduit will be mesuared as 1 unit.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 4 sqmm including 1 run of 4 sq mm single core multistranded copper conductor, PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly all as specified and directed including taking down all sub main wiring . Make of FR wire; Polycab/Havells/RR Cable,Make of PVC Pipe - Polycab/FInolex/Kalinga premium. Note : 2 Run of 4 sqmm, 1 Run of 4 sq mm and 1 run of PVC conduit will be mesuared as 1 unit.

S&F Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as specified. Make :Legrand Lexic / Hager /Schneider Elect.

S & F in repair MCB double pole, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Legrand/schiender/ Hager.

S & F in repair MCB double pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Schneider/Legrand/ Hager.

S & F in repair MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed. Make Legrand/schiender/ Hager.

Supply and fixing of socket outlet two-in-one, 3 pin each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed. Make Anchor/Plaza/SSK

Supply and fixing /laying galvanised pipe 50 mm bore medium grade fixed to pole with clamps nuts, bolts and washers or laid under road crossing or fixed to wall complete all as specified and directed.

S& F GI bracket light grade GI Pipe 1.2 mtr Length for fixing of street light fitting 36/40 Watt including connection all as specified and directed.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 16 sqmm 2 core with armoured type cable gland complete all as specified and directed by Engineer-in-Charge.Make Havells/ Glostar/ polycab.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 10 sqmm 2 core with armoured type cable gland complete all as specified and directed by Engineer-in-Charge.Make Havells, Glostar & polycab or equivlant make available in Mkt.

M & L for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 2 core with armoured type cable gland complete all as specified and directed by Engineer-in-Charge.Make Havells/ Glostar/ polycab.

M & L for brick protection to cable using old size sub class 'B' bricks, laidflat, dry butt jointed, laid lengthwise perpendicular to the axis of cable all as specified & directed.

M&L for sand cushioning with layer of sand 8 cm thick before laying of cable and 15 cm after lying of calbe in trenches complete all as specified & directed.

Single pole and neutral enclosure 20 A ,230 V with a two pin and earthplug and socket complete with one Single pole MCB 25A Complete all as specified and directed.

Supply and fix 1200mm sweep compelte with down rod and electronic type regulator incl fitting and fixer as per site requirement and complete accessories to 230 volts single phase 50 hz ac supply and connection up with incl two core PVC sheathed copper conductor all as specified and directed. BEE 5 star Rated. Make Havells/Khaitan/CG

S&F energy saving new generation 10 watt LED, 6000k bulk head luminaire with opal diffuser light fitting complete with all acessories and connection complete. Make Philips/Wipro/CG

S&F Exhaust fan 300 mm sweep metal body including cutting of walls , louvers nut and bolts etc including connection complete all as specified and directed.Make Havells/CG/Bajaj

S & F Tubes, 'Medium grade' galvanised of size 20 mm with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F PP-R Gate valves (brass insert) OF SIZE 20 mm dia including connection complete all as specified and directed.

M/s. M Company