REPAIR TO TILING, BRICK WORK, JOINERY, PLUMBING WORK, FALSE CEILING, ROOFING, PANELLING AND MISC REPAIRS IN BLDG AT HQ MTN BDE, BTC-I, BTC-II, OLD CBS, FD WKSP, AGE(I) BHALRA AND NASKA CAMP AT BHALRA UNDER AGE (I) BHALRA

Amount

Demolition of brick or stone boulder masonry work built in cement mortar including all quoins, arches, pillars, staging including taking out roots from walls including separation of serviceable material and removal of debries outside cantt area all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 mtr mean radius and built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Demolition of un-reinforced cement conecrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm Cement concrete Type C-2 1:3:6 (40mm graded aggregate) for plinth protection complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete Type B-1, 1:2:4 (20 mm graded aggregate) 75 mm thick floor finishing cement concrete surface even and smooth using extra cement complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 10 mm thick cement plaster in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 5 mm thick cement plaster in cement mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of new plaster surface applying two coats of white wash on walls all as specified and directed by Engineer-in-Charge.

M&L applying two coats of cement base paint on newly plastered surfaces and primed surfaces on walls all as specified and directed by Engineer-in-Charge.

M&L Preparation of new plaster surface applying two coats of white wash on ceiling all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises outside low laying area all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in levelling course complete where required all as specified and as directede.

M&L non skid ceramic joint free coloured tiles 7 to 8mm thick (Square/Rectangular) design area exceeding 0.11 sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry over and including 15mm thick screed bed in CM (1:6) jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed by Engineer-in-Charge.

M&L glazed ceramic exc 0.08 sqm but n exc 0.16 sqm (coloured tiles of 7 mm thick) on vertical surfaces set and jointed in neat cement slurry and including 10mm thick plaster in CM (1:4) and pointed in white or colour cement to match all as specified and directed by Engineer-in-Charge.

M&L Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in floors/skirting etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by Engineer-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of Debries outside Cantt area complete all as specified and directed by Engineer-in-Charge.

M&L machine cut kota stone slab flooring 16mm to 18mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete and including 20mm thick screed bed or bedding layer in cement mortar (1:6) all as directed by Engineer-in-Charge.

M&L Kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with mirror cut polish complete and including 10mm thick plaster in CM (1:4) all as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F Fe 410-w (Gde-E-250) quality-A roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed.

S&F Fe 410-w (Gde-E-250) quality-A Framed work as in doors, gates & water tank staging of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening complete all as specified and directed.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

M&L for preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n exc 4 sqm each incl iron mangery complete.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engineer-in-Charge.

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 125 X 60 mm complete all as specified and directed by Engineer-in-Charge.

Supply and Fixed Pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges ,lock stike plate etc, size 165 X 60 mm complete all as specified and directed by Engineer-in-Charge.

M&L providing cement concrete (1:2:4) type B0 (12.5mm aggregate) for filling in pressed steel frames and other similar items etc complete all as specified and directed by Engineer-in-Charge.

S&F 30 mm thick Flush shutters, solid core construction with block boards core and plywood face panels commercial type on both sides.

S&F 35mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge. Glass or wire cloth, etc. in panels or sash squares shall be measured separately

M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F 100 mm long butt hinges, Medium weight cold rolled mild steel and fixed.

S&F Mild steel sliding door bolts(250mm long), plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F Mild steel barrel tower bolts (150mm Long), stove enamelled black, with bright bolt and fixed

S&F Mild steel pressed handles 150mm long, oval type, stove enamelled black

S&F 100mm long aluminium ,anodised barrel tower bolt of extruded section and fixed.

S&F 100 mm long aluminium handles cast type anodised.

S&F in repairs 150mm Hasp and Staples, mild seel, wire type stove enamelled black, including bolt to hinges plate and fixed with screwes.

S&F in repair 150 mm floor door stopper of aluminium alloy body and tonuge, anodised, with hard drawn steel spring fixed in floor.

S&F in repairs 300 mm ordinary rat rail rod pattern springs,including rollerand roller plate mild steel fixed with screwes wooden frame and welded to iron frame.

S&F in repairs 25mm PVC coated curtain rod with fixing bracket, stops, side fancy, roller etc complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engineer-in-Charge.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in Each pane complete all as specified and directed by Engineer-in-Charge.

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any guage, thickness, including nainital or similar pattern roof coverings, ridges, hips , valleys and flashings complete all as specified and directed by Engineer-in-Charge.

S&F Pre-painted galvalume alumium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall ,fixed with self Tapping screwes all as specified and directed by Engineer-in-Charge.

S&F galvanised, corrugated 0.63mm mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of Zinc coating 275 fixed with L- type or J- type or cranked hook bolts in lieu of screws complete all as specified and directed.

S&F Pre-painted galvalume alumium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall ,fixed with self Tapping screwes complete all as specified and directed by Engineer-in-Charge.

Re-fixing Pre-painted galvalume alumium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strenght of 550 Mpa as in roof covering /cladding to wall ,fixed with self Tapping screwes as specified. Self tapping screwes measered seperately complete all as specified and directed by Engineer-in-Charge.

S&F in repairs self tapping screw fixing 75 mm long for old Pre -Painted galvatume aluminium zinc caoting GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall , ,srewed fixed to roof up to double storey hights of building inclding tools all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulb, insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets including removal of Debries outside Cantt area complete all as specified and directed by Engineer-in-Charge.

M&L for Non asbestos fibre cement building boards 4 mm thickness fixed or laid/inserted to timber/GI/Aluminium frame work with screws complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium snap grid frame work for false ceiling and Hangers 3 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions, fixed in repirs, complete all as specified and as directed.

Dismantling water tanks of capacity 1000 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge.

Supply and fixing for Rotational moulded polyethelene water storage tanks of capacity 1000 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Dismantling water tanks of capacity exc 250 & n exc 500 Ltrs and removing to store complete all as specified and directed by Engineer-in-Charge.

S&F for Rotational moulded polyethelene water storage tanks of capacity 500 Ltrs (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer-in-Charge.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Exc 250 and n exc 500 liters complete all as specified and directed. (Writing the date of cleaning on tank)

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Exc 500 and n exc 1000 liters complete all as specified and directed.(Writing the date of cleaning on tank)

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm- 455gms/ 40mm - 690 gms)

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm- 455gms/ 40mm - 690 gms)

Taking up or down steel water tubing and connections 15mm bore including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge.

S&F medium grade 15mm bore galvanized tubing with all fittings including short lengths, fixed to walls, concealed in wall and ceilings or laid in floors complete with all fittings (such as bends, back nuts, diminishing pieces, caps and plugs, unions etc) all as specified and directed by Engineer-in-Charge.

Re- fixing medium grade 15 mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel water tubing and connections 20mm bore including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge.

S&F medium grade 20mm bore galvanized tubing with all fittings including short lengths, fixed to walls, concealed in wall and ceilings or laid in floors complete with all fittings (such as bends, back nuts, diminishing pieces, caps and plugs, unions etc) all as specified and directed by Engineer-in-Charge.

Re-fixing medium grade 20 mm bore galvanized tubing with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified and directed by Engineer-in-Charge.

S&F in repairs Gun-metal 15 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Bib tap long neck cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repairs Bib tap standard of PTMT 15mm bore any colour high pressure screwed for iron pipe. (Minimum weight 15mm-90gms/20mm 125gms). complete all as specified and directed.

S&F in repairs Stop valves 15 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair 15 mm dia pillar tap cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered "Hot or Cold" with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Stop valves 20 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair Brass CP wall Mixer for mixing hot & cold water screwed down for iron pipe and fixed to 15 mm dia pipes all as specified and directed by Engineer-in-Charge.

S&F in repairs water jet for EWC chromium plated with PVC connection complete all as specified and directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs CP angle stop cock with wall flange,cast copper alloy,fancy type screwed down high pressure with capstan head fly handle ,screwed with ends for iron pipes or unions of 15 mm , complete all as specified & directed.

S&F in repair PVC valveless, syphonic action type flushing cistern, low level white, with inlets, ball valve, float and handle including brackets 10 ltr capacity.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed.

S&F in repairs Vitreous china bowl urinal flat back size 430X370X340mm (Minimum) with grating and union for discharge pipe (excluding flushing cistern ,flush pipe and waste pipe) complete all as specified and as directed .

S&F in repairs Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe ) including connection to trap & flushing pipe etc complete including making good to floor complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (Padestal pattern) white complete with 10 literes, valveless syphonic action type, flushing cistern, high level, with inlete, ball valve, float, chin and pull and brackets snow white colour including 'P' trap and soft close seat cover ,complete all as specified & directed by Engineer-in-Charge.

S&F in repairs Vitrous china wash hand basin, angle back, size 600X480 MM, snow white colour,including32 mmbore brass cp waste coupling with long screwed shank and fly nuts , PVC flexible waste pipe of bore 32 mm and adequate length, 15 mm bore PVC connection pipe 450 mm long with brass nuts on both side,complete all as specified & directed by Engineer-in-Charge.

S&F in repairs pvc connection 600 mm length with brass nut complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and fuard rail

S&F Grating doom 100 mm dia of PTMT (Minimum weight 25 gms)

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories)

S&F Mild steel sheet eaves gutters thickness of sheet 1 mm and dia 100mm, galvanised class 3, half round with rounded edge including brackets complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-Charge.

M&L preparation of new wooden surfaces applying one coat of pink primer and two coat of synthitic enamal paint.

M/S KOTWAL CONSTRUCTIONS

RAVI KUMAR

VEER TRADERS