Sanjarwas Making raw water arrangement pumping station from Loharu feeder for water supply scheme Sanjarwas, Distt. Ch. Dadri.

Amount

Supply & Erection of Horizontal centrufugal type pumping sets of following duties directly couples to AC squirrrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with com A Raw water pump set For Pumping Station near Loharu Feeder 3500 LPM 40 mtrs head Horizontal centrifugal pump set 1440 RPM, 3 phase 50 Hz of suitable (Four star rating)

Supply and fixing following CI specials / sluice valves/ non return / valves/ bell mouth/ Reflex valves including cost of Jointing materials, laying, jointing materials, laying, jointing in position as per specification given in schedule No. II A) Detail of specials A) CI/ D/F bends, Reducers, tees etc. B) Jointing material

Supply and fixing CI D/F pipe for delivery and suction pipe from the foundation wall of the pump chamber for all the raw and clear water pumping sets at water works as per specification given in schedule NO.II (for Pumping machinery & Inlet / outlet Pipes) A) DI D/F pipes a) 300 mm i/d

(A ) Supply, erection, testing and commissioning Wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly shouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm deep having following items. A) For Raw water Pump set for 700 LPM x 12 Mtr Head=2 Nos. (a) Main switch – Amp 200 Amp. 2 Nos. ( L&T, Siemens, ABB) (b) Volt meter 100 x 100 mm range 0 to 500 volt 1 No.(AE/KAPPA/ L&T) (c) Amp meter 100 x 100 mm range 0 to 100 Amp 2 No. - (AE/KAPPA/ L&T) (d) CT 100/3 Nos. (AE/KAPPA/ L&T) (e) VSS – 1 No & ASS = 2 No. of approved make. (f) SPP 2 No. of approved make (g) Motor starter, star delta 2 No for 700 LPM x 12 Mtr Head Motor ( L&T, Siemens, ABB) (h) Capacitor of suitable capacity – 2 Nos. (i) Indicating Lamp – One Set J) Change over switch –200 Amp One set

Supply erection, testing of ISI marked copper wire for 2 No panel boards from main switch to panel and wiring of panel with size 10mm sq (copper wire) ISI marked complete in all respects with accessories like thimble etc. (a) From Tranformer to Panel 16 mm sqaure 3 core (b) From Pannel to motors

4 mm sqaure 3 core

6 mm sqaure 3 core

10 mm sqaure 3 core

Supplying erection & tested of standard make LED light 85 watt with pipe fitting and accessories with bults reputed make

Supplying, erection, testing and commissioning of Diesel Genrating set laying noise control acoustic radiator cooled 3 phase, 4 wire, 50 cycles 415 +(-) 1% volt AC alternator coupled directly through a set of flexible coupling on a common M.S. febricated base frame with diesel engine 82.5 KVA The rating should be at 1500 RPM a) Diesel Engine b) Alternator c) Base Plate d) Battery 24 V e) 1 x 120 sq mm 3.0 core XLPE Aluminium=20m f) Tools A.M.F. PANEL a) Motorised change over switch 250 Amp 4 P with fuse base and HRC links 250 Amp b) Under voltage/over voltage relay = 2 No 415 VAC c) Engine start relay 24 VDC 1 No d) Electronic Timber 24 VDC 1 No e) Electronic Timber 24 VAC 2 No f) Auxiliary relay 220 VAC 2 No g) Auxiliary relay 220 VDC 3 No h) Metering set 145 VAC, 1 set (Amp Meter, Volt Meter, ASS, VSS, Phase indicaters, Control fuse, frequency meter, CT'S) i) Metering set 24 VDC (Amp. Meter, Volt meter) j) Over Load protection for DC 1 No k) Battery Charger 24 VDC (Blueron make) l)Copper bus bar of suitable size m) KWH meter 96 Sq mm size n) Startuing fuse button & key switch (on / off) o) Engine protection unit with Audivisual alarm 7 shut down for low lubrucatuing oil pressure & high coolant temperature. p) Indicating lump for low lubricatin oil pressure high collant temoriture, set running, loadon, DC control on. Note:- Control Panal shall have the provision to provide auto manual failure panal (AMFP) Engine protection unit with Audiovisual alarm and shut down for low lubricating oil pressure and high coolant temperature Indicating lump for low lubricating oil pressure high coolant temperature, set running, load on, DC Control on. Note : Control Panel shall have the provision to provide auto manual failure panel (AMFP)

Sub Head No. 2 : DI pipe for channel & Distribution system Providing & fixing DI specials as per ISI complete DI pipe for distribution system

Bidder Name

Amount

OM PARKASH CONT

OM PARKASH CONT