Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical 214 400064 | MUMBAI SUBURBAN | MAHARASHTRA | 400064 | Rejected-Technical As per committee recommendation |
| 4 | Rejected-Technical | Rejected-Technical As per committee recommendation |
Tender Value
Refer Docs
EMD Value
₹19,000
Closing Date
8 Aug 2020, 4:00 pmClosed
EXECUTIVE ENGINEER
MD CWC BURLA DOCTORS COLONY BURLA SAMBALPUR ODISHA 768017
CONSTUCTION OF BOUNDARY WALL AND BOREWELL AT SITE BOUDH UNDER MMSD-II CWC BURLA
2020_CWC_573506_1
MD/HQ/NIT/2020-21/1233-40 DATED 24.07.2020
Open Tender
Civil Works
90 days
MAHANADI DIVISION CWC BURLA
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EXECUTIVE ENGINEER
₹19,000
16 Sept 2020
24 Jul 2020
10 Aug 2020
24 Jul 2020
8 Aug 2020
24 Jul 2020
Amount
Site Clearance and levelling
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.All kinds of soil.
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Mild steel and Medium Tensile steel bars Eq= (@1% of RCC x 78.5 =0.01x2.10 x 78.5 =1.65 Qtl.)
12 mm. thick cement plaster in CM1:6 (1 cement: 6 coarse sand)
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
Boring/drilling bore well for inserting casing/ strainer pipe of 150 mm dia by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. In all type of soil
Boring/drilling bore well for inserting casing/ strainer pipe of 150 mm dia by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. In rocky strata including boulders
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
Providing & fixing India mark II hand pump as per IS specification including connection with 32 mm GI pipes as per the satisfaction of Engineer in charge.
Providing GI Steel Gate
RAJ KISHOR DEBTA
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid