Diposite

Amount

Safe Carriage of following material from Electricty store center Hts to Pit site of work through the Kacha and Pakka road including loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-50 Kms.)

9/11 Mtr. long STP Poles.

8.5/9 Mtr. long PCC Poles.

11 KV X-Arms, weasal conductor, G.I wire,Disc Insulators, Pin insulators, clamps Abc Bunch and other required line material, if any.

XLPE Cable 3*185, 3*120,3*170

Safe Carriage of following from Electricty Store center Hathras to Pit Site of Work through the Kacha and Pakka road loading and unloading at the respective ends including the cost of arrangement of labour, T&P, etc. which required for proper completion of work.(Distance 00-70 Kms.)

16 KVA T/F

25/63 KVA T/F

Errection of following Poles including Cutting of kharanja/mettalic road/concrete portion while digging pit & complete H.T./L.T. fittings as per RESPO manual and as per direction of Engineer Incharge including the cost of labour, T&P and carrier etc. required for proper completion of work.

STP poles 8.5/9 Mtr.

PCC poles 8.5/9 Mtr.

Double pole complete fitting of 8.5/9 mtr long PCC Pole

Errection and grouting of stays as per RESPO Norms and as per direction of supervising engineer. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost.

Fixing of earthing rod as per RESPO Norms and as per direction of supervising engineer.

Laying, sagging and stringing and jumpering / binding etc. of new & old ACSR Weasal conductor / GI in 11 KV / LT lines as per RESPO manual and as per direction of supervising engineer.

XLPE Cable 3*185, 3*120,3*170

ACSR Weasal conductor

50/95/120 sqmm. Areal Bunch Conductor

Fixing of Danger board with clamps

Filling the cable Box Indoor & Outdoor Side

Fixing of TPMO

Providing & Fixing of Following Clamps

11 KV X Arms Clamps for STP/PCC Pole

11 KV DP Clamps for STP/PCC Pole

11 KV F Clamp for STP/PCC Pole

Cutting, chopping, triming of tree branches to clear the line route to give 2 mtr. horizontal and vertical clearance to the line coming in the route of different feeders as per direction of supervising engineer

Installation of following T/F on newly Errected/constructed Single/double pole in proper alignment direction & making HT/LT connection.

16 KVA T/F

25/63 KVA T/F

Guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parallel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of X-guards (Tillis) of GI wire at distance of 3 Mtr.

Installation of extra ''T'' on the erected poles wherever required alongwith all fitting as per direction of supervising engineer including the cost of labour, T&P etc, required for proper completion of work. The "T" pole shall be grouted with cement, sand and brick ballast/stone ballast in ratio 1:4:8 including the cost of material.

GOSWAMI ENTERPRISES

Bobby Electricals