Repair and comprehensive maint of Swimming pool, plants and equipments, fire fighting system in Sekhon Hall, New Tech Flight, ATC etc at AF Stn Nal under GE(AF) Nal

Amount

Material and labour for Comprehensive maintenance of Swimming pool comprises of the following equipments complete all as specified and directed. (a) Pumping sets of capacity 3.5 HP - 05 Nos (01 as Standby) (b) Pressure filter of filtering capacity 50 Cum/Hr - 04 Nos (01 as Standby) (c) Dosing pump - 02 Nos (One for Chlorination and one for Soda Ash) (d) Electrical panel board consisting of starters of suitable rating complete. Note: Rate quoted by the contractor shall deemed to be included for the following :- (i) Contractor shall provide trained technician and a helper, who will visit Swimming pool once in a week, to check and repair / servicing of the equipments above to ensure the serviceability and proper functioning of Swimming pool. (ii) Grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) Cleaning all swimming pool building inside, plant room,equipments including sarrounding area of the building minimum for five meter all around of bldgs . Also inculde white washing of equpiment / plant room (iv) Check and ensure serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5Hp / 3.26 KW Capacity and other connected items. (v) Weekly Periodical maintenance shall be done in presence of JE (E/M), Also as and when the periodical maintenance will be commenced, contractor shall inform to AGE (E/M) and JE (E/M) one day before, so that necessary check and balance for supervision of work can be exercised by the executives.

Material and labour for Comprensive maintenance of fire fighting system in Sekhon Hall , New Tech Flight and New ATC of the following equipments complete all as specified and directed. (a) Main Fire Pump with centrifugal motor of existing capacity- 03 Nos (b) Jockey Fire pump with Electric motor of existing capacity - 03 Nos (c) Makeup fire Pump- 02 Nos (d) DG Fire Pump with engine - 03 Nos Note: Rate quoted by the contractor shall deemed to be included for the following :- (i) Contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , New Tech Flight and New ATC once in a week, to check and repair / servicing of the equipments above to ensure the serviceability and proper functioning of installation. (ii) Grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) Cleaning all Sekhon Hall , New Tech Flight and New ATC building inside, plant room,equipments including sarrounding area of the building minimum for five meter all around the building . Also inculde white washing of equipment / plant room (iv) Check and ensure serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing Capacity and other connected items. (v) Weekly Periodical maintenance shall be done in presence of JE (E/M), Also as and when the periodical maintenance will be commenced, contractor shall inform to AGE (E/M) and JE (E/M) one day before, so that necessary check and balance for supervision of work can be exercised by the executives.

Daily maintenance of swimming pool, water quality as per IS:3328 of 1993 & amended 2010, of size 25m x 12.5m x 5.5m deep (Summer & Manson) including Sunday & Holidays, by providing one skilled man power with the help of pool maintenance equipement, cleaning pool water by removing deposited mud, silt and all other accumulated material from the bottom and side, channels, by brushing bottom surface with suction/sweeper, also topping up the pool for fresh water required including adding the chemicals for disinfection of water and maintaining desired parameter of water as per IS norms complete all as specified. NOTE :- (i) Swimming pool chemicals shall be issued under relevent item of this schedule for treatment of swimming pool water. (ii) Chemical to be supplied under relevent item of this schedule shall be used in accordance to the directions issued by Engineer-in-Charge. (iii) Contractor shall provide pool maintenance equipment to his workmen deployed on the job. However, the rate of this item shall include this aspect. (iv) Cleaning shall be carried out all as directed by Engineer-in-Charge. (v) Unit rate for this item includes arrangement of minimum one skilled person. However, the contractor may deploy more manpower for assistance of labour, if he desires so, at his own cost but nothing extra shall be admissible on this account

S&F in repair Pressure pump limit switch of capacity 1Psi to 4 Psi and 230 Volt as per existing make and model fixed on presure booster line complete all as specified and directed.

Supply, installation, testing and commissioning in repair of fire alarm control panel complying with BS EN 54 two loop panel with 99 detectors and 99 modules and upto 200 detectors and module (per each loop) for annexes complete all as specified and directed .

Supply, installation, testing and commissioning in repair of detectors complying with and type certified to EN-45 addressable type multisensor detector with heat and smoke combination with base with self built intelligence as per IS:11360 (For annexes) complete all as specified and directed.

Supply, installation, testing and commissioning in repair of addressable manual call point / pill station resetable type with base complete all as specified and directed

Supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continous type normal operation for atleast 50minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed

Supply and fixing in repair Addressable monitor module for activating the sirens complete all as specified and directed

Supply and fixing in repair stove enameled black Rigid steel conduit of size 25mm bore complete all as specified and directed.

Taking out old unserviceable Hose box by cutting and welding and S&F hose box made of 18 gauge MS Sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet for keeping 2 Nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and directed.

Supply and fixing in repair hose box for hose real of 20mm size of 30mtr length complete with coupling branch pipe and nozzle.complete all as specified and directed. (i) 01 No 63mm dia oblique pattern instantaeous female type GM landing valve with caps and chain confirming to IS 5290 with 100 dia pressure guage. (ii) 2 x 15 mtr long 20mm dia reinforced rubber hose reel with MS painted, swing type drum 6.5mm nozzles etc conforming IS 884 incl supporting bracket. (iii) One set of GM branch pipe conforming to IS 903.(iv) One branch pipe, one fire man axe, first aid hose reel and fire extinguisher.

BLANK

Supply and fixing as in repair fire fighting Gun metal 63mm bore short branch pipe with 20mm bore gun metal nozzle ISI marked (IS: 903) suitable for instantaneous connection to inter connection hose pipe coupling complete all as specified and directed.

Supply and fixing as in repair Fire fighting canvas hose Pipe, cotton synthetic fibre, circular woven jacketed rubbersised fabric, reinforced rubber lined (RRL), fire hose, delivery, treated against Rot with Mystox, 35.7 Kg/sqcm brust pressure, 22 Kg/sqcm proof pressure, 63mm dia & 15 mtr long (ISI marked) Type 'A' with instantaneouse type male & female GM coupling (ISI) of 63mm dia bound and riveted to hose pipe with copper rivets & 1.5mm thick copper wire, complete all as specified and direced.

M&L for Scratching old paint on fire fighting installation complete with the help of emery paper and wire brush, and painting the surfaces with two coats of synthtic enamel Fire red paint, as per existing or as directed including marking flow arrows complete all as specified and directed. The installation includes the following equipments:- (i) Water suction lines of size 150mm bore - 80 RM approx incl supporting structure. (ii) Fire pump set 70 HP -01 No (iii) Jockey pump set 25 HP- 01 No (iv) Diesel Generating Pump -01 No. with frames, (v) SWT cover- approx 18 Sq mtr. (vi) Hydrant Post - include Hose cabinet - 08 Nos

Supply and fixing as in repair CI non return valve 150mm bore for suction including jointing material,including nuts bolts etc. complete all as specified and directed.

Supply and fixing as in repair CI non return valve 80mm bore for suction including jointing material,including nuts bolts etc. complete all as specified and directed.

Supply and fixing as in repair 80 mm bore Butterfly valve Cast Iron body, Wafer type integrally moulded close end body construction with Hand lever operated and rating of PN-1.0 confirming to IS : 13095 (ISI Martked) complete all as specified and directed.

Supply and fixing as in repair gun metal gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipes or for unions in water makeup line in Fire pump suction line complete all as specified and directed.

Taking down and Supply and laying PVC insulated 2 core 1.5 sqmm PVC sheathed FRLS multi strand copper conductor cable through existing steel conduit for fire alarm system complete all Note : Cost of steel conduit shall be measured and paid separately

S&F as in repair Battery charger with control panel, relays for Tickle and Turbo charger suitable for charging DC voltage 12V upto 10 Amps battery, charger having overload protection, over voltage protection and working on auto mode, when battery is discharged, it works automatically, including indicator lamps complete all as specified and directed.

Supply and Fixing as in repair of 100 mm dia Burden type,stainless steel dial type pressure guage having calibration of 0-15 Kg/cm2 including brass isolation valve and pipe complete all as specified and directed.

Taking out Monoblock centrifugal 15/20 HP electric motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, bearing, bushes etc of suitable size for following capacity of motor including neecessary repairing of rotor shafts if required and refixing the same in original position and testing and commissioning complete all as specified and directed. Note- Unit rate of this item include the cost of transportation charges for carrying the motor from site to workshop and back. Nothing extra shall be admissible on account of any misunderstanding.

Taking out Monoblock centrifugal 60 HP electric motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, bearing, bushes etc of suitable size for following capacity of motor including neecessary repairing of rotor shafts if required and refixing the same in original position and testing and commissioning complete all as specified and directed. Note- Unit rate of this item include the cost of transportation charges for carrying the motor from site to workshop and back. Nothing extra shall be admissible on account of any misunderstanding.

Taking out Monoblock centrifugal 75 HP electric motor 3 phase, 440 Volt from the exisitng foundation, transport to workshop for rewinding by using super enamelled copper winding wire of existing wire gauge incl other allied items such as varnish tape, sleeve, greasing, bearing, bushes etc of suitable size for following capacity of motor including neecessary repairing of rotor shafts if required and refixing the same in original position and testing and commissioning complete all as specified and directed. Note- Unit rate of this item include the cost of transportation charges for carrying the motor from site to workshop and back. Nothing extra shall be admissible on account of any misunderstanding.

Supply only Platic cylindrical sealed disposable floating sanitiser station for disinfection of swimming pool with arrangement for controlled release of active ingredients in water and head suspender complete all as specified and directed. Make : model- Stequa 412 HD of make Decliback / Potter & Watt / Equivalent.

Supply only alum for water treatment in crystal form packed in 50 Kg Bags of make as per approval of accepting officer complete all as specified and directed

Dismantling and opening of existing self priming recirculation pump of single stage/horizontal self priming pump set 3.5 HP/3.26 KW Capacity /flow rate 47.0 m3/hr, Head 14.0 m with pre-filter thermoplastic injected pump casing and replacement of bearing, cleaning of shaft, varnishing of winding, applying grease and reassembling and re-fixing in same position complete all as specified and directed. Note:- Size and make of bearing shall be as per existing one

Supply and fixing in replacement of under water illumination standard water proof underwater light LED type 30 W including water proofing jointing, connecting all as specified and directed. Note :- Make and Model shall be as existing one

Supply and fixing as in repairs 5 way valve of suitable size fitted with Pent Air media filter of suitable size as per sample, testing and commissioning complete all as specified and directed.

Taking down and S&F Submersible flat cable of size 1.5 Sqmm 2 core 1100 volt grade cooper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed.

Supply and fixing GI wiremesh of 4mm gap, 300mm dia circular shaped double folded fixed to suitable MS circular frame connected through 3.0 metre long 20mm dia GI pipe light grade, circular frame and extended GI handling pipe duly painted by one coat of synthetic enamel paint of desired and directed tint over a coat of red oxide, complete all as specified and directed.

Supply only Calcium Hypo Chlorite (Bleaching Powder) Grade - I with concenteration of active chlorine not less than 25% as Per IS specficattions in 25 Kgs Bags to MES Store yard as directed by Engr -In -Charge. Make : Aquafit/ Shriram/DCM/ PACL or as approved by E-in-Cs Br.

Notes for item No. 34:- (i) Supply shall be made by the contractor based on the requirement / piecemeal manner as directed by the AGE E/M and shall be delivered in the store yard of AGE E/M. No claim whatsoever on account of extra charges of transportation shall be entertained by the Deptt. (ii) Contractor shall provide the original purchase vouchers alongwith test certificate of entire quantity of each lot at the time of delivery. (iii) Testing of every lot of High strength Calcium based granular & Bleaching powder shall be got carried out by the contractor from NABL lab at his own cost and report shall be submitted to Engr-in-Charge. (iv) Material shall be brought by the contractor in packed plastic containers of 40-45 Kg each. (v) As and when the said material is required for use in treatment as directed by Engineer-in-Charge, the same shall be collected by the rep of contractor from the store yard of AGE E/M and shall be made available at the installation for its use. The unit rate of this item include the cost of this element. (vi) The brand and make of the chlorination chemical must be recommended and certified by All India Institute of Hygiene & Public Health (Govt. of India), confirming compliance to all the above specifications with a declaration from the laboratory that from the technical, strength, stability, health, safety, and operational point of view, as well as the fact that this product is used for drinking water applications for consumption by humans, the brand and make of Calcium based granular chlorination chemical, bleachig powder & NaDCC are suitable for drinking water chlorination and are recommended for use. Make: All makes approved by NMPT Committee of E-in-C’s Branch/Zonal CEs.

Repairing of existing panel by disconnecting existing burn out cable/ wiring complete and replaced with 1.5 Sqmm single core copper conductor cable include replacement of Digital Volt meter, Digital Amp Meter alongwith CTs, relays, making connection, replacement of cable lugs of suitable size, repair/replacement of locking arrangement include painting with two coat of synthetic enamel paint complete all as specified and directed. Note : Repalcement of contractor, relay, MCCBs will be measured seperately.

Supply only MCCB 4 Pole, 250 Amps, rupturing capacity 36 KA, 415 volts grade, AC 50 Hz of suitable frame size as per existing, Magnetic adjustble type and making connections using suitable size copper lugs / thimbles by crimping tools, including testing and commissioning in panel board complete all as specified and directed.

Supply only MCCB 4 Pole, 200 Amps, rupturing capacity 36 KA, 415 volts grade, AC 50 Hz of suitable frame size as per existing, Magnetic adjustble type and making connections using suitable size copper lugs / thimbles by crimping tools, including testing and commissioning in panel board complete all as specified and directed.

Supply only MCCB 4 Pole, 125 Amps, rupturing capacity 16 KA, 415 volts grade AC 50 Hz of suitable frame size as per existing, Magnetic adjustble type and making connections using suitable size copper lugs / timbles by crimping tools, including testing and commissioning panel board complete all as specified and directed.

Supply only Indicator lamp LED type of RYB colour , 230 Volts complete all as specified and directed.

Supply only 3 Pole Power Contactor of 70 Amp, 230 V complete all as specified and directed.

Supply only 3 Pole Power Contactor of 32/40 Amp, 230 V complete all as specified and directed.

Supply and fixing in repair fire hydrant landing valve type A (single head outlet) of 63 mm dia of size conforming to IS 5290 complete all as specified and directed.

Supply and Fixing in repair Rubber Insertion Sheet flange of thickness 4mm where required as per site requdirement, including cutting and making holes of sutable size complete all as specified and directed.

S&F in repair Rubber coupling suitable for up to 20 HP motor including CI outer coupling and nuts & bolts complete all as specified and directed.

S&F in repair Rubber coupling suitable for up to 75 HP motor including CI outer coupling and nuts & bolts complete all as specified and directed.

S&F in repair Star coupling including CI nuts & bolts suitable up to 15 HP Motors complete all as specified and directed.

Taking down and S&F Submersible flat cable of size 10 Sqmm 3 core 1100 volt grade cooper conductor conforming to IS 694/1990 with latest ammendments from starter to motor complete all as specified and directed.

BIDAWAT ENTERPRISES