Renovation and Reconstruction of Crematorium at Caribhat in Survey No. 25/1 of village Carambolim, Tiswadi Goa under provision at Clause 14 of Advasi Vikas Yojana Scheme. (Second Call)

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead.

Dismantling asbestos sheet roofing including ridges hips valley and gutters and stacking the material within 50 meters lead.

Dismantling steelwork in single sections in R.S. joists including dismembering and stacking within 50 mts. lead

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m.;All kinds of soil; b)All types of Ordinary rock including all types of laterite rock blasting prohibited

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering shuttering and finishing in:; a) All works upto plinth level

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering shuttering and finishing :; a) All works upto plinth level

Centering & shuttering including Strutting Propping & removal of forms for i)Foundations Footings Bases for columns

Centering & shuttering including Strutting Propping & removal of forms for iii)Columns Piers Pillars Aburments Posts and struts (square rectangle polygon in plan)

Providing and laying in position machine batched concrete (BMC), machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering , shuttering, finishing and reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength and durability as per the direction of the Engineer-in-charge. M25 grade of reinforced cement conrete by using 410kg of cement per cu.m. of concrete. All works upto floor V level. Providing M-30 grade concrete by using 420kgs of cement per cu.m. of concrete instead of M-25 grade of B.M.C.

Providing TMT steel reinforcement bars of (SAIL TATA. VIZAG JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing asbestos cement sheets roofings fixed with galvanized iron j or l hooks bolts & nuts 8mm dia G.I. plain and bitumen washer complete excluding the cost of purlines rafters and trusses. a)Corrugated sheets 6mm thick.

Providing and fixing asbestos cement roofing accessories with galvanized iron J or L hooks bolts and nuts and or G.I. seam bolts G.I. plain and bitumen washers etc. Complete d) Barge boards

Providing and fixing insulating cement board sheet ceiling of approved of approved quality with necessary nails etc. complete. Flame retardent insulating board 12 mm.(frame for base to be paid seperately) complete as per direction of Engineer -In Charge.

Steel work in built up tubular (round square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL TATA. VIZAG JSW APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete.

Steel work welded (SAIL TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting hoisting fixing in position and applying priming coat of red lead paint. b) In tees angles flats and channels

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 5 (1 cement : 5 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones for 23 cms thick masonry walls in c.m. 1 : 4 (1 cement : 4 coarse sand in foundation upto plinth level. Extra for laterite masonry in all sizes in superstructure from floor I level upto floor V level.

12mm cement plaster 1:4 (1 cement : 4 fine sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Providing and fixing in position S.S. hand rail in main stair case and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials etc. complete.

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. Pipes a) 110 mm dia

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing and fixing vitrified glossy finished (600x600) and 10mm thick tiles in floor treads of steps landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete.

Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and prepolished machine cut for kitchen platforms vanity counters window sills facias and similar locations of required size approved shade colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade area of slab over 0.50 sqm. a)Jet Black

Providing and laying 25 mm shahabad stone flooring over 25 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) laid over with grey cement slurry mixed with pigment including. Rubbing and polishing complete.

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand. a) 20 mm thick.

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab cleaning etc. complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. a)Jet Black

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern 32 mm diameter M.I. or C.P. brass trap and union complete including cutting and making good the walls where required. c) Flat back wash basin size 550 x 400mm with a pair of single 15 mm C.P. brass pillar taps.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. a)15 mm dia nominal outer dia pipes.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. b)20 mm dia nominal outer dia pipes.

Providing and fixing brass stop cock (heavy) of approved quality c)25 mm nominal bore .

Providing and fixing brass full way valve (heavy) duty with wheel of approved quality c)25 mm nominal bore .

Providing and fixing rigid PVC S.W.R. (soil waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed a) 110 mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door b) 75 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete with door. a)110 mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings R.S. or C.I. brackets standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete including painting of cister and fittings cutting and making good the walls and floors where required. a)One urinal basin with 5 litres p .v .c. automatic flushing cistern.

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. b) 500 lit. capacity

Constructing soak pit 1.20m x 1.20m x1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design. :

Providing and laying in design & pattern factory made PVC RUBBER MOULDED Interlocking Cement Concrete paver blocks of M35/M40 strength thickness & size/shape made by table vibratory method using Rubber mould laid in required colour & pattern over 50mm thick compacted bed of fine sand compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern finishing and sweeping extra sand in footpath parks lawns drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. b) 60mm thick -Coloured other than Grey (M35 grade)

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements pintals hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing 20mm thick marble slab to urinal partitions with cement complete

Supplying ,Fixing and Installation of the Cast Iron Pyre as approved by the Architect / Engineer In -charge including transportation etc complete.

Exposed decorative laterite masonry using Patradevi stone of size as specified and laid as directed by architect in cement mortar 1:4 (1 cement : 4 coarse sand)

Applying breathable non-reactive antifungal and water repellant Silane/ Siloxane chemical as approved by Archaeological Survey of India/ Engineer of approved brand and manufacture diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil) on the exposed laterite masonry surface with two or more coats to give uniform application of chemical on the surface all complete as per direction of Engineer. (The rate is inclusive of all materials & labours).

Supply and Installation of matt finish Stainless steel (Grade-304)hollow section Name board of 12 inch ( height) ( Letters to be installed on wall ) as per direction of Engineer In charge / Architect including the cost of fittings etc complete.

Supplying and fixing of Precast RCC slabs(factory madethe factory should be ISO certified and registered under Dirctorate of Industries Govt. of India) at site in concrete Grade of M-25 with 20 mm nominal size Granitic or basaltic aggregate consolidated by means of mechanical platform vibration etc. with lifting hooks of M.s. 10mm bars and PVC cups including cost of reincforcement Certificate from manufacturer shall be produced indicating grade of concret and minimum content of steel in the product along with 5 year free replacement warranty in case of breakage complete and as directed by Engineer -in -charge. f) Size 1200 x 400 x 150 mm with reinforcement not less than 9 kg

Supply and fixing and commisioning of 30 watt Solar LED street light pole of 4.00 M height (Galvanised Iron ) with base plate and foundation bolt etc. as per direction of Engineer In charge / Architect.

Planting permanent hedges including digging of trenches 60 cm wide and 45 cm deep refilling the excavated earth mixed with farmyard manure supplied at the rate of 4.65 cum per 100 metre and supplying and planting hedge plants at 30 cm apart as per MORTH Specification 307. a) Planting Permanent hedges including digging of Trenches

Please Enable Macros to View BoQ information