Loading
Loading…
Loading…
| # | Company | Amount |
|---|---|---|
| 1 | ₹2.9 Cr |
Tender Value
₹3.1 Cr
EMD Value
₹6.2 L
Closing Date
27 Apr 2026, 3:00 pmClosed
Executive Engineer, BUILDING DIVISION VAISHALI, HAJIPUR
EE
Executive Engineer, Vaishali Building Division, Hajipur
Superintending Engineer, Building Circle Muzaffarpur
SE
INSTALLATION, SUPPLY, TESTING AND COMMISSIONING OF FIRE FIGHTING WORKS AT DIFFERENT COURT BUILDINGS AT HAJIPUR, VAISHALI.
128523
NIT 41/BCD/HAJIPUR/2025-26
Open Tender
CIVIL
Vaishali
• (a) Unconditional bank guarantee from any scheduled Indian bank issued within the state in the format given. 16.1
Bid Security Amount in Rupees Total Bid Security Amount in Rupees Rs. 622100.00 IFB
• 2 (i) Legal Status of Bidder 4.3(a)
(ii) Place of Registration.
(iii) write Principal place of Business
(iv) Power of attorney of signatory Bid 4.2(iv)
• Total value of civil engineering construction work, in Rupees, Performed in last five years. minimum annual financial turnover (in all classes of civil engineering construction works only) amount of construction work of at least the equal to the 50 % of estimated cost of works for which bid has been invited. The turn over will be indexed at the rate of 8% for a year
4.5(A) (a)
2020-21
2021-22
2022-23
2023-24
2024-25
• 4 Amout in Rupees related to Work Experience of Similar nature Satisfactory completed at least one similar work of value not less than 50% of estimated Cost 4.5(A) (b)
• 5 Minimum Quantities of work done as prime contractor in any one year during last five years, units shall be same as in Requirement column
Items Qty Unit
FIRE FIGHTING Rs. 15551516.53
• Electrical License The contractor or his identified sub-contractor should possess required valid electrical license for executing the building electrification works and should have executed similar electrical works for a minimum amount as indicated in Appendix in any one year 4.5A( d)
• (a) Amount of Existing commitments and ongoing works in Rupees Sec 2-1.4(A)
(b) Amount of Work for which Bid already submitted, in Rupees Sec 2-1.4(B)
• 8 Numbers and Maximum age of Equipments with bidder Type of Equipment
• 9 Name of the Personnel and Experince in years and Select from drop down list Personnel / Qualification 4.5(B) (b)
Site Engineer B.E. (Civil) + 03 Years Exp. (3 years in Building Construction) or Diploma in Civil + 7 year Exp. In Building construction or retired A.E. 1 No.
Site Supervisor Fresh Graduate in Civil or Diploma Civil + 02 Years Exp. or retired I.T.I Holder. 1 Nos.
• 10 Evidence of accesses to Financial Resources in Rupees Evidence of access to or availability of creadit facilities (10% of estimated cost), certified by bankers (for work under this bid). 4.2(i)
• 11 Proposed methodology and programme of construction Select from drop down list the proposed methodology and programme of construction, backed with equipment planning and deployment 4.3(l)
• 12 Litigation History. Select from drop down list. Information regarding any litigation, current or during the last five years, in which the Bidder is involved, the parties concerned, and disputed amount. (Attached or not) 4.3(j)
• Affidavit Select from drop down list. Regarding statements made in the required attachments are true and correct. Sec-2, Affidavit
• Undertaking Select from drop down list. Able to invest a minimum of cost upto 25% of contract value of work. During implementation of contract. Sec-2, Undertaking
• Registration No.
• IT.& ST Registration & clearance Certificate
• Labour License
Character Certificate
NOC for Debar (If required)
CIVIL
PERCENTAGE
L1
1
15 documents required · 15 mandatory
₹10,000
Processing Fee: 5900
₹6.2 L
2 nd Pre-bid- at office of CE(North), BCD, PATNA 16-04-2026 03:00 pm
6 Oct 2026
2 Apr 2026
28 Apr 2026
2 Apr 2026
27 Apr 2026
2 Apr 2026
9 Apr 2026
PIPING & VALVES
Providing and fixing M.S. pipe to I.S. 1239 (Heavy class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including painting with one coat of primer after surface preparartion and two coats of synthetic enamel paint, cutting and making good the walls good complete. Pipe upto 40 mm dia threaded joints with holdtite, 50 mm dia and above should be welded joint ( all type ) ( internal works/External Works).
25 mm dia.
50 mm dia.
80 mm dia.
100 mm dia.
150mm dia
200 mm dia.
Providing & fixing one coat of 4 mm thick PYPKOTE/COATAK anti-rust protection including primer and lap of 25 mm on external burried pipe including surface preparation, complete in all respects.
150 mm dia
80 mm dia.
Providing and fixing cast iron dual plate wafer type non return valves of PN1.6 including nuts, bolts,1.5mm thick compressed asbestos gasket including matching flanges as per table "E" complete
200 mm dia.
150 mm dia with lever
100 mm dia.
80 mm dia.
Providing and fixing C.I. butterfly valves PN 1.6 complete with bolts, nuts 1.5mm thick compressed asbestos gasket companion flanges as per table "E" complete.
200 mm dia.
150 mm dia with lever
100 mm dia.
80 mm dia. With lever
Providing and fixing brass ball valve (full bore type) with plastic coated lever and screwed female ends tested to 20 Kg/ cm2 of approved quality as specified.
25 mm dia.
Providing and fixing dial type pressure gauge with isolation cock and copper pipe at hydrant station.
Providing and fixing gunmetal single acting air release valve with screwed inlet 25 mm dia..
INTERNAL HYDRANT SYSTEM
Providing and fixing ISI marked SS 304 fire hydrant valve 80 mm inlet with single outlet and fitted with 63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain, nuts, bolts and 3 mm thick compressed asbestos gasket at locations as per drawings ( inlet flange as per IS: 5290-1969 Class C ). MAKE : OMEX / NEWTECH / EQV.
Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 30 m long high pressure hose as per IS : 5132 with 5 mm outlet SS nozzle with shut off valve ( IS: 884-1969). Make :OMEX / NEWTECH / EQV.
Providing and fixing 63 mm dia (15 m long) EPDM lined fabric hose including SS male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS : 636 Type II and coupling to IS: 903 – 1975 with ISI certification. MAKE : OMEX / NEWTECH / EQV.
Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with double glazed front door and pad locking arrangement, painted Fire Red with stove enameled paint and FIRE HOSE written on front including necessary supports ( to house TWO lengths of canvas hose with couplings, branch pipe and nozzle). MAKE : OMEX / NEWTECH / EQV.
Providing and fixing standard short size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling ( ISI marked. ). MAKE : OMEX / NEWTECH / EQV.
FIRE HYDRANT ACCESSORIES (External )
Providing and fixing SS316 Single headed landing valve conforming to IS -5290 (Type-A) with 63 mm dia. single instantaneous female coupling on the outlet SS316 metal blank cap and chain, necessary companion flanges, nuts, bolts, washer and gasket complete as per specification. (ISI marked). All parts and body shall be of SS316 as per IS:5290.
Single outlet
Providing and fixing 63 mm dia. 15m long rubberized lined hose including SS316 male and female instantaneous type coupling approved by fire authority, machine wound with copper wire complete in all respects. Hose shall conform to IS 636 Type-A and coupling to IS 903 -1975 ( ISI marked)
Providing and fixing standard short size SS316 branch pipe with nozzle 16 mm dia. outlet with standard instantaneous type 63 mm dia. coupling. (ISI marked, IS:903)
Providing and fixing fire hose cabinet fabricated from 16 gauge M.S. sheet with single glazed front door and pad locking arrangement, painted Fire Red with stove enameled paint and FIRE HOSE written on front including necessary supports ( to house TWO lengths of canvas hose with couplings, branch pipe and nozzle).
Providing and fixing 150 mm dia Three –Way Fire brigade connection consisting of 63 mm dia instantaneously male coupling.( To be connected to riser ).
Providing and fixing of self illuminated / auto glow "EXIT" signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site.
Providing, fixing, testing & commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories: Below false ceiling & above false ceiling.
Pendant type sprinkler
FIRE EXTINGUISHERS
Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV.
Capacity 4.5 kg.
Providing and fixing stored pressure Multipurpose fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV.
Capacity 6 Kg.
FIRE ALARM & DETECTION SYSTEM
Supply, installation, testing and commissioning of Analogue Addressable 2 loops Fire Alarm Control Panel with LCD display having capacity of 126 devices per loop.
SITC of Analogue Addressable smoke detector complete with base.
SITC of Analogue Addressable manual call point Cum Module complete with mounting base.
Supply and Installation of Wall Mounted Horn cum Strobe Lights with 110 cd, complete with junction box for mounting on surface with control modules.
Supply and laying of 1.5 sq. mm dual core copper wire with 19 mm dia PVC conduit.
FIRE PUMPS & ACCESSORIES
Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per the specifications.
a) Horizontally mounted, centrifugal type single stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 LPM against a total head of 70 M complete with necessary 'Y' strainer on the suction side and pressure gauge with GM cocks on the delivery side including bypass arrangement (with 50 valve and upto 5M G.I. Medium pipes) for periodical testing of the working of the testing of the working of the pumping set as per TAC rules.
Diesel Engine Driven Fire Pumping set suitable for automatic operation consisting of the following as per specifications:
a) Horizontally mounted, centrifugal type single stage/ multi-stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 2280 lpm against a total head of 70 m complete with necessary 'Y' strainer on the suction side and pressure gauge with stop cocks etc, on the delivery side including bypass arrangement (with 50 mm dia G.M. stop valve and upto 5M G.I. stop valve and upto 5M G.I. Medium pipes) for periodical testing of the pumping set of the pumping set as per TAC rules
Supplying, installation, testing & commisioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, asrequired ( Terrace Pimp )
900 lpm at 35 m Head.
450 lpm at 35 m Head.
SITC of Electrical Control Panel for Terrace Pump.
SUPPLY, INSTALLATION TESTING & COMMISSIONING OF:
a) Electrical Motor Driven Automatic pressurisation (Jockey) pumping set consisting of the following as per specifications. Horizontally mounted centrifugal type single/multi-stage fire pump for building pressure loss due to any leakage in the system and capable to deliver approx 180 LPM against a total head of 70 M having cast iron body. bronze impeller, stainless steel shaft and complete with "Y" strainers on suction side Pressure Gauge with stop G.M. Stop Valve etc. on the delivery side the delivery side including bypass arrangement (with 25 mm dia. G.M. Stop Valve and upto 5 M.G.I. Medium pipes) for periodical testing of the working of the pumping set.
Supply, Installation, Testing & Commissioning of cubical type floor mounted Fire Pump Control Panel fabricated from 14 g M.S. CRC Sheet duly powder coated finish of approved shade and comprising of :
INCOMING:
Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects.
Supplying & fixing air vessel made of 250 mm dia., 8 mm thick MS sheet, 1200 mm in height with air relaese valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necessary support clamps at ceiling
Power cable 3.5 core x 35 Sq. mm
Power cable 3.5 core x 90 Sq. mm
Power cable 3.5 core x 16 Sq. mm
Power cable 3.5 core x 16 Sq. mm
Providing and fixing M.S. structural work fabricated from standard sections, (MS rounds, angles, channels ,slotted angle, etc.) including cutting to size, drilling ,welding or insert plates including cost of (Hilti) fasteners, clamp in RCC structural members as directed, including two or more coats of synthetic enamel paint over one coat of primer after surface preparation including cutting and making good walls.
Supplying & fixing of 200 mm Foot Valve for suction end.
Providing, installation, testing and commissioning of stainless steel Y - strainer fabricated out of 1.6 mm thick SS - 304 sheet with 3 mm dia holes with SS flange, 200 mm dia.
WATER TANKS.
Earth work in excavation over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed. All kinds of soil
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth : consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
Extra for every additonal lift of 1.5 m or part thereof in : All kinds of soil
Supplying and filling in plinth with local sand and under floors including watering, ramming consolidating and dressing complete.
Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.
Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1: 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)
Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by the manufactures.
Centring and shuttering including strutting, propping etc. and removal of form for:
Foundations, footings, bases of columns, etc., for mass concrete.
Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.
Lintels, beams, plinth bams, griders, bressumers and contilevers.
Suspended floors, roofs, landings, balconies and access platform
Edges of slabs and breaks in floors and walls Under 20 cms wide
Edges of slabs and breaks in floors and walls Above 20cm wide
Reinforcement for RCC work including straightening. Cutting, bending, placing in position and binding all complete.
Thermo-Mechanically Treated bars. 8 mm dia
Thermo-Mechanically Treated bars. 10 mm dia
Thermo-Mechanically Treated bars. 12 mm dia
Thermo-Mechanically Treated bars. 16 mm dia
Thermo-Mechanically Treated bars. 20 mm dia
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate /retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement All work upto plinth level Concrete of M-25 grade with minimum cement content of 330 kg/cum
Brick work with fly ash bricks as per IS 12894(2002) & IS 3495 in foundations and plinth in : "Half brick Masonary Cement mortar 1.:4 (1 cement: 4 coarse sand )- 125 mm th Brick work"
Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. "In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works."
12 mm cement plaster of mix 1:3 (1 cement:3 coarse sand)
15mm cement plaster 1:3 (1cement : 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall
6 mm cement plaster to ceiliing of mix : 1:3:(1 cement : 3 fine sand)
Neat cement punning
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed protions of W.C. kitchen and the like consisting of :1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area. IVth course of 400 micron thick PVC sheet (overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm
Pump House of Dimension 10' x 16' x 10' ( H ) required with prper ventilation for release of smoke & heat.
Overhead water tank for fire fighting 10 KL capacity required.
aoc.json
Purchase Order
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Check list farwarding.pdf
NIT • 1.76 MB
Letter no 7291 E-in-C bcd.pdf
NIT • 0.55 MB
Letter no 7292 E-in- C bcd.pdf
NIT • 0.64 MB
Nit No. 41 Year 2025-26.pdf
NIT • 3.46 MB
SBD_NIT 41.doc
NIT • 0.67 MB
Fire Fitting 31103033.xlsx
NIT • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .