NAME OF WORK REPAIRS TO EXISTING SEWAGE SYSTEM DRAIN BOUNDARY WALL FOOTPATH HARDSTANDING APPROACH ROAD ETC IN OTM AND MD ACCN AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT-0

Amount

Demolition of brick work masonry built in cement mortar all as specified and directed.

Demolition and breaking up drain pipes (salt glazed drain pipes, AC or RCC) set in cement mortar internal dia of pipes 200 mm all as specified and directed.

- Ditto - item No 2 here-in-before but 300 & 450 mm mm dia

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut to facilitate demolition) all as specified and directed.

Taking down cement plaster on brick/stone walls etc incl raking out joints, hacking for key and scrubbing down with water all as specified and directed.

Demolition of chequered tiles/Paver block complete and removing the debris out side MD land ass as specified and as directed by Engr-in-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for manholes etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft/loose soil all as specified and directed.

S&F in repairs Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars,and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over & including 20mm thick screed bed in CM 1:4, making noising and moulding etc all as specified and directed.

Returning, filling in , including spreading, watering and well ramming in layers n.exc 25 cm thick using soils all as specified and directed.

Removal of excavated material for a distance exc 5KM but n.exc 10KM and depositing outside the defence premises on desecration of Contractor as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cm 1:6 all as specified and directed.

M&L cement concrete type B1 1:2:4 (20 mm graded aggregate) as in benching/copings all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,

Rendering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement all as specified and directed.

M&L for 200 mm bore reinforced concrete pipe class NP2 laid and jointed complete with collars all as specified and directed by Engineer-in-Charge

M&L for 300 mm bore reinforced concrete pipe class NP2 laid and jointed complete with collars all as specified and directed by Engineer-in-Charge

M&L Concrete bed to 200 mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

M&L Concrete bed to 300 mm bore drain pipes in PCC 1:4:8 type D-2 incl packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

M&L for 450mm bore reinforced concrete pipe class NP2, laid and jointed complete with collars all as specified and directed by Engineer-in-Charge

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for bore of pipe 150/200 mm all as specified and directed.

M&L 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement. all as specified and directed.

Supply only water proofing compound ISI marked.

M&L for Chequered cement concrete coloured tiles (300 X300) 20-25mm thick confirming to IS -1237 (rubber moulded) in floor setc, set, jointed & pointed with cement slurry over and including 15mm thick bedding layer of cement sand mortar (1:6) complete all as specified by Engr-in-Charge.

M&L for 25mm thick Screed bed or bedding layer of cement mortar 1:4 for laying floor finishes all as specified and directed.

M& L for 80 mm thick, M-40 grade machine pressed precast rubble moulded colour concrete paver block in any shape and size as approved confirming to IS 15658-2006 complete all as specified and directed.

M&L Sand filling under floors or in foundation including watering and consolidtion as per specified.

M&L for 100 mm thick cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes.

M & L for 100 mm thick, cement concrete type B1, 1:2:4 (40mm graded stone aggregate) as in floors, pavings and hard standing etc. and finishing top surface with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc. complete all as specified

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified

S&F in repair Precast factory made cement concrete Curve stone type B1 (1:2:4) 20 mm graded aggregate including chamfers,weatherings,throatings etc and setting with mortar complete with Joints to match the surface with specified and directed by Engr-in-Charge.

S & F in repair precast factory made (SFRC) light duty main hole covers 100 mm thick rectangle in shape each manhole cover 0 .60 sqm area for main hole with at least 5 cm bearing each side complete all as specified and directed by Engr-in-Charge.

S & F in repair precast factory made (SFRC) light duty main hole covers 65 mm thick rectangle in shape each manhole cover 0.60 sqm area for main hole with at least 5 cm bearing each side complete all as specified and directed by Engr-in-Charge.

S & F in repair precast factory made (SFRC) light duty main hole covers 65 mm thick circular in shape each manhole cover 600 mm dia for main hole with at least 5 cm bearing each side complete all as specified and directed by Engr-in-Charge.

S & F precast factory made (SFRC) light duty GT covers 65 mm thick rectangle in shape each size GT cover size should be 0.25 sqm area for main hole with at least 5 cm bearing each side complete all as specified and directed by Engr-in-Charge.

M&L cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in hardstanding in floor as per specified and directed by engr-in-charge.

M&L for two coat of cement base paint over water proof wall care putty including preparation over newly plastered surface.

M&L for preparation of old surface and applying one coat of cement base paint white or tinted on wall complete all as directed and specified.

S & F in repair MS Post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) incl all necessary drilling, bolting and riveting, etc., and similar work conforming to Fe 4410-o or Fe 130-0.

M&L for two coats of synthetic enamel paint over a coat of primer on Concrete surface all as per specified and directed.

S&F in repair galvanised 2 strand , steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples ar steel pins, etc as directed .

M&L for preparation of new Concrete surface and applying two coat of synthetic enamel paint of any description over 10cm girth or width, not otherwise described complete all as directed and specified.

S&F 40 mm thick Dhoulpur stone Jaali each piece size (900 mm X 750 mm) with superior quality,finished and maked craft art of post as per existing to match with the existing and as directed by Engr-in-Charge.

S&F Dhoulpur stone post 100 mm X 100 mm and height 1 m to fixing with dhoulpur stone Jali with superior quality, perfect finished and maked craft art of post as per existing to match with the existing and as directed by Engr-in-Charge

V.K. Enterprises