REPAIR OF TABLE AND OTHER WOODEN ARTICLE AND POLISHING OF FURNITURE AT OTM/MD BLDG UNDER GE (W) COLABA, MUMBAI

Amount

Following existing unserviceable parts of furniture shall be removed and replaced /repaired /carriy out carefully without disturbing the adjoining parts including tightening, screwing, welding, glueing, nailing wherever applicable and Work will be executed where the furniture exist in different user units / Md accns under jurisdiction of GE(W) Colaba, Mumbai including BSO furniture yard all as specified and as directed.

Side Board Drg No FD- 241 Removing of old u/s top from side board and S&F new top of size 1220mm x455mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face of including fixing of flat teakwood beading all around the shutter all as specified on drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing of old & u/s door shutters from side board and S&F new door shutters of size 635mmx417mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including Magnetic catcher including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing old unsv/ broken handle / knobs from door shutter and drawers and S/F new 100- 125mm long CP handle of for shutters and CP knobs for drawers as per sample approved by Engg-in-Charge/ GE all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing old U/s ply back from side board & S/F new ply back of 6mm thick plywood BWR Gde of size 1220mm x 635mm all as specified and shown on drg.Ref Drg No FD-241.

Removing old & u/s drawers from side board and S/F new drawers of existing shape and size made out of Pre-laminated 18mm thick MDF Board Exterior Gde both side walnut face all as specified and shown in drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing of old u/s sides from side board and S&F new sides of size 455mm x 635mm made out of Pre-laminated 18mm thick MDF Board Exterior Gde both side walnut face all as specified and shown in drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing of old unserviceable Bottom and S&F new Bottom of side Board 1220mm x455mm made out of Pre-laminated 18mm thick MDF Board Exterior Gde both side walnut face all as specified and shown in drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing old & u/s legs from side board and S/F new legs of existing shape, size made out of well seasond teak wood all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-241.

Removing old unsv/ broken hinges from shutter and S/F new concealed hinges all as specified & shown in drg / directed by Engg-in Charge.Ref Drg No FD-241.

Removing of u/s locks from the door shutters of side board & S/F new brass locks 4 levers 40mm with duplicate keys all as specified and shown in drg. Ref Drg No FD-241.

Removing of all u/s beading of side board & S/F new 4mm thick, 18mm wide teak wood beading of semi round shape to complete of side board as directed by Engg-in-Charge. Ref Drg No FD-241.

M&L all applicable portion of side board shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg FD-241.

Supply of new telescopic channel of size 12" wide for drawers of base unit of side board all as specified and shown on drg and directed by Engineer-in-Charge. Ref 241.

Removing old & u/s long rail of side board and S/F new long rail as per existing shape and size made out of well seasond teak wood all as specified & shown in drg / directed by Engg-in Charge. Ref Drg No FD-241.

Removing old & u/s short rail of side board and S/F new short rail as per existing shape and size made out of well seasond teak wood all as specified & shown in drg / directed by Engg-in Charge. Ref Drg No FD-241.

Book case Drg No FD- 237 Removing of old u/s Top from Book Case and S&F new Top as per existing type and size of Pre-laminated 18mm thick MDF Board of Exterior Grade both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and shown on drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old & u/s shutters from book Case and S&F new shutters of size of 380mmx622mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face Magnetic catcher including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old & u/s upper shelf from book Case and S&F new upper shelf of size 820mmx 205mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified on drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old unsv/ broken hinges from shutter and S/F new piano type pino continuous hinges of size 20-25mm or both Door shutter all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old unsv/ broken knobs from door shutter and S/F new CP knobs as per sample approved by Engg-in-Charge/ GE all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-237

Removing old unsv plywood back from Book case & S/F new plywood back of 6mm thick ply wood BWR Gde size 1200mmx 660mm. Rest all as specified and shown on drg. Ref Drg No FD-237.

Removing old & u/s legs from Book case and S/F new legs of size 45mmx45mmx100mm made out of well seasond teakwood all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old & u/s long rail of book case and S/F new long rail of size 40mmx25mm x860mm made out of well seasond teakwood all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing old & u/s short rail of book case and S/F new short rail as per existing shape and size made out of well seasond teakwood all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing of old u/s sides from Book Case and S&F new sides of size 300mm x 660mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing of old u/s bottom from book Case and S&F new bottom of size 1200 mm x 300mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teak wood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-237.

Removing of all u/s beading of Book Case & S/F new 4mm thick 18mm wide teak wood beading of semi round shape to complete of Book Case all as directed by Engg-in-Charge. Ref Drg No FD-237

M&L all applicable portion of Book Case shall be 02 coats of French polish of approved shade all as directed by Engg-in-Charge. Ref Drg FD-237.

Table Bed Side Fd-276, 248 Removing old u/s plywood back of the table bed side & S&F new back of size 510mmx450mm of 6mm thick plywood BWR Gde ISI Marked of existing shape, size all as specified & shown on drg/ directed by Engg-in Charge. Ref Drg No FD-276, FD-248

Removing old u/s top of the table bed side & S&F new top of size 450mm x230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-276 and 248.

Removing old u/s sides of the table bed side S&F new sides of size 510mmx 230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. Ref Drg No FD-276 and 248.

Removing old u/s shelf of the table bed side & S&F new shelf of size 450mm x230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and shown on drg/ directed by Engg-in Charge. Ref Drg No FD-276 and 248.

Removing old u/s beading of the table bed side and S&F new teak wood beading 4mm thick 18mm wide alround the front egdes of table bed side all as specified & shown on drg and directed by Engg-in Charge. Ref Drg No FD-276, FD-248

M&L all applicable portion of Table bed Side shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg FD-276, FD-248

Table dressing ladies Fd-251 Removing old unserviceable Drawer of Table Dressing Ladies and S&F new Drawer of size 350mmx380mmx190mm made of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge.Ref Drg No FD-251.

Removing old unserviceable Looking mirror of Table Dressing Ladies and S&F new Looking mirror 5/5.5mm of size 1220mmx 366mm fixed with teak wood front of 25mmx19mm frame alround and back frame 45mmx40mm all around all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-251.

Removing of unserviceable plywood from back of mirror of table dressing ladies and S&F of new 6mm thick plywood BWR Gde all as directed and specified and shown on drawing. Ref Drg No FD-251

Removing old unserviceable Sliding glass of Table Dressing Ladies and S&F new Sliding glass 5/5.5 mm thick of size 290mmx380mm. All as specified in drg and directed by Engineer-in-Charge. Ref FD-251

Removing old unserviceable knobs of drawers of Table Dressing Ladies and S&F new CP knobs all as specified and drg/ directed by Engineer-in-Charge. Ref FD-251

Removing old unserviceable aluminium chanel from Table Dressing Ladies and S&F new aluminium chanel of existing size and type. All as specified in drg/ directed by Engineer-in-Charge. Ref FD-251

M&L all applicable portion of Table Dressing Ladies shall be 02 coats of French polish of approved shade all as directed by Engg-in-Charge. Ref Drg No FD-251

Table dressing ladies FD/MAP-II/07 Removing old unserviceable SIDES of base unit of Table dressing ladies and S&F new SIDES made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified in drg/ directed by Engg-in Charge. Ref FD/MAP-II/07

All as per item sl item No 43 here in before but for TOP of size 380mmx350mm to table dressing ladies .Ref Drg No.FD/MAP-II/07.

All as per item sl item No 43 here in before but for BACK of size 550mmx1150mm to table dressing ladies .Ref Drg No.FD/MAP-II/07.

All as per item sl item No 43 here in before but for shutter of size 350mmx400mm to table dressing ladies .Ref Drg No.FD/MAP-II/07.

Removing old unserviceable BOTTOM of base unit of Table dressing ladies and S&F new BOTTOM made out of 12mm thick plywood of size 350mmx380mm BWR Gde ISI marked all as specified and shown in drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable complete drawers of base unit of Table dressing ladies and S&F new complete drawers of existing size and type made out of 18mm thick prelaminated MDF board all as specified and shown on drg / directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable telescopic channel for drawer base of Table dressing ladies and S&F new telescopic channel of size 12" wide all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable handles of drawers of base unit of Table dressing ladies and S&F new CP Handle all specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable knobs of drawers of base unit of Table dressing ladies and S&F new CP knobs all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable magnetic catcher of door panel of base unit of Table dressing ladies and S&F New Magnetic Catcher of size 4cmx3cmx1.5cm all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD/MAP-II/07

Removing old unserviceable hinges of door panel of base unit of Table dressing ladies and S&F new stainless steel piano type continuous hinges of 20-25mm width all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable/broken Looking mirror of Table Dressing Ladies and S&F new Looking mirror of 5/5.5mm thickness of size 1250mmx450mm. All as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07.

Removing old unserviceable 6mm thick ply form back of mirror to Table dressing ladies S&F new 6mm thick plywood of size 1250mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref -FD/MAP-II/07

Removing old unserviceable foam cusion of stool of Table dressing ladies and S&F new cusion of existing size and type made out of 75mm thick foam ISI marked covered with tapestry cloth of approved shade /colour by Engg-in/Charge/GE over cora cloth of best quality duly stitched all as specified and shown on drg/ directed by Engineer-in-Charge. Ref -FD/MAP-II/07

Removing old unserviceable Nylon castor wheel of stool of Table dressing ladies and S&F new 50mm dia PVC twin castor wheel complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref -FD/MAP-II/07

Removing old unserviceable beading of Table dressing ladies and S&F new teakwood beading of existing size, shape to table dressing ladies all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD/MAP-II/08

M&L all applicable portion of Table Dressing Ladies shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg No Ref FD/MAP-II/08

Table dressing Gents Fd/E6/MAP/16 Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new 5/5.5mm thick Looking mirror of size 1200mmx600mm. All as specified and shown in drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable wood frame covered to mirror of Table Dressing Gents and S&F new teak wood frame of size 50mmx28mm alround the mirror. All as specified in drg/directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable glass shelf of Table Dressing Gents and S&F new 5.5mm thick glass shelf of size 600mmx100mm. All as specified in drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable ply back of Table Dressing Gents and S&F new ply back of size 1200mmx600mm of 12mm thick plywood. All as specified in drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable sides of Table Dressing Gents and S&F new sides of size 1200mmx100mm made out of prelaminated 18mm thick MDF board Exterior Gde of approved shade all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable wooden brackets of Table Dressing Gents and S&F new teak wood brackets of size 38mmx112mmx112mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable legs of Table Dressing Gents and S&F new teak wood legs of size 450mmx38mmx38mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable hinges of Table Dressing Gents and S&F new piano type continuous hinges of size 25mm wide all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Table dressing Gents Fd-230 Removing old unserviceable Drawer of Table Dressing gents and S&F new Drawer complete all as per drg of size 322.5mmx300mmx150mm made up of 12mm thick pre-laminated MDF Board Exterior Gde both side walnut face all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230

Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror 5/5.5mm of size 380mmx760mm with teak wood front frame and batton both of size 35mmx25mm fixed alround duly fixed with clamp for hanging of table dressing gents all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230 .

Removing old unserviceable knobs of drawers of Table Dressing gents and S&F new knobs as per sample approved by Engg-in-Charge/ GE. All as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230

Removing old unserviceable ply back of Table Dressing Gents and S&F new ply back of size 760mmx380mm of 6mm thick plywood. All as specified in drg/ directed by Engineer-in-Charge. Ref FD-230.

Removing old unserviceable teak wood frame of Table Dressing Gents and S&F new teak wood frame of existing size. All as specified in drg/ directed by Engineer-in-Charge. Ref Fd-230

M&L for two coats of french polish to new part and one coat to entire surface table dresing gents all as specified and directed by Enginer-in-Charge.Ref FD-230

Table Writing FD-275,33,249 Removing old unserviceable top of Table Writing and S&F new Top of size1145mmx600mm made of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter complete all as specified and drg/ directed by Engg-in Charge. Ref FD-275,249,33

Removing old unserviceable Leg of Table Writing and S&F new leg of size 55mmx35mmx760mm of well seasoned teak wood all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-275,249,33

Removing old unserviceable Top rail long of Table Writing and S&F new rail of size 25mmx50mmx1145 of well seasoned teak wood all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-275,249,33

Removing old unserviceable short rail Top of Table Writing and S&F new rail of size 25mmx50mmx600mm of well seasoned teak wood all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-275,249,33

Removing old unserviceable PVC Hard Rubber rings of Table Writing and S&F new PVC Hard Rubber rings of 25mm dia of best quality as approved fixed with screw all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Ref FD-275,,249,33

Removing old & u/s drawers from table writing and S/F new drawers of existing shape, size made out of 12mm thick pre-laminated MDF Board all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-275,249,33

Removing old unserviceable Stiffner Long of Table Writing and S&F new Stiffner Long made out of well seasoned teak wood Stiffner Long of size 25mmx50mmx1145mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-275,249,33

Removing old unserviceable Stiffner small of Table Writing and S&F new Stiffner small made out of well seasoned teak wood Stiffner small of size 600mmx25mmx50mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-275,249,33

Removing old & u/s door shutter from table writing and S&F new door shutters of existing size all as per drg made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face including fixing of flat teakwood beading all around the shutter all as specified and drg/ directed by Engg-in Charge. FD-275,249,33

Removing old unsv/ broken handle/knobs from door shutter and drawers and S/F new CP handle of 100- 125mm long handle for shutters and CP knobs for drawers as per sample approved by Engg-in-Charge/ GE. All as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-275,249,33.

Removing old unsv/ broken hinges from shutter and S/F new piano type pino continuous hinges of size 20-25mm wide for door shutter all as specified & shown in drg/ directed by Engg-in Charge. Ref Drg No FD-275,249,33.

Removing old unserviceable ply back of Table Writing and S&F new 6mm thick ply back of existing size. All as specified in drg and directed by Engineer-in-Charge. Fd 275,33,249

M&L all applicable portion of Table Writing shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg No FD-275,249,33

Table Centre FD-29/235/274 Removing old unserviceable Top of Table Centre and S&F new top of size 900mmx450mm made of pre-laminated 18mm thick MDF Board with 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

Removing old unserviceable top long rail of Table Centre and S&F new top long rail made out of well seasoned teak wood of size 20mmx50mmx900mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

Removing old unserviceable top short rail of Table Centre and S&F new top short rail made out of well seasoned teak wood of size 20mmx50mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

Removing old unserviceable legs of Table Centre and S&F new legs made out of well seasoned teak wood of size 60mmx30mmx400mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

Removing old unserviceable bottom rail of Table centre and S&F new bottom rail made out of well seasoned teak wood new of size 20mmx50mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

Removing old unserviceable stiffner of Table centre and S&F new stiffner made out of well seasoned teak wood of size 20mmx50mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

S&F new teak wood Bracket of size 75mm x 75mm x 25mm for Table centre all as shown on drg/ as directed be Engr-in- charge. Ref Drg No 29/235/274

Removing old unserviceable PVC Hard Rubber rings of Table Centre and S&F new PVC Hard Rubber rings of size 20mm dia of best quality fixed with screw all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No 29/235/274

M&L all applicable portion of Table Centre shall be two coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg No 29/235/274

Peg Table FD 277/384/248 Removing old unserviceable Top of Peg Table and S&F new top of size 300mmx450mm made of pre-laminated 18mm thick MDF Board wiith 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248

Removing old unserviceable top long rail of Peg Table and S&F new top long rail made out of well seasoned teak wood of size 20mmx40mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. FD 277/384/248

Removing old unserviceable top short rail of Peg Table and S&F new top short rail made out of well seasoned teak wood of size 20mmx40mmx300mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248

Removing old unserviceable leg of Peg Table and S&F new legs made out of well seasoned teak wood of size 30mmx50mmx380mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248

Removing old unserviceable bottom rail of Peg Table and S&F new bottom rail made out of well seasoned teak wood of size 20mmx40mmx300mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248

S&F new teak wood Bracket of size 75mm x 75mm x 25mm for Peg Table all as shown on drg and as directed by Engr-in- charge. Ref Drg No FD 277/384/248

Removing old unserviceable PVC Hard Rubber rings of Peg Table and S&F new PVC Hard Rubber Rings of 20mm dia of best quality fixed with screw all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248

M&L all applicable portion of Peg Table shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg384/248. All as specified and directed by Engineer-in-Charge

Teapoy FD-34/232/278/382 Removing old unserviceable Top of Teapoy and S&F new top of size 600mmx450mm made of pre-laminated 18mm thick MDF Board wiith 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

Removing old unserviceable top long rail of Teapoy and S&F new top long rail made out of well seasoned teak wood of size 20mmx50mmx600mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

Removing old unserviceable top short rail of Teapoy and S&F new top short rail made out of well seasoned teak wood of size 20mmx50mm450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

Removing old unserviceable legs of Teapoy and S&F new legs made out of well seasoned teak wood of size 60mmx30mmx540mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

Removing old unserviceable bottom rail of Teapoy and S&F new bottom made out of well seasoned teak wood of size 20mmx50mmx450mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

S&F new teak wood Bracket of size 75mm x 75mm x 25mm for Teapoy all as shown on drg and as directed be Engr-in- charge. Ref Drg No FD34/232/278/382

Removing old unserviceable PVC Hard Rubber Rings of Teapoy and S&F new PVC Hard Rubber Rings of 20mm dia of best quality fixed with screw all as specified and shown on drg and directed by Engineer-in-Charge. Ref Drg No FD34/232/278/382

M&L all applicable portion of Tepoy Fd shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg384/248. All as specified and directed by Engineer-in-Charge

Table Dining 6 Pers FD/Map/II/03 FD-30/239/273 Removing old unserviceable Top of Table Dining 6 Persons and S&F new top complete of size 1500mm (L) x 900mm (W) suitable for table dinging 6 pers ons shall be made of pre-laminated 18mm thick MDF Board wiith 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03 FD-30/239/273

Removing old unserviceable top long rail of Table Dining 6 Persons and S&F well seasoned teak wood new long rail of size 25mmx100mm1500mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03, FD-30/239/273

Removing old unserviceable top short rail of Table Dining 6 Persons and S&F well seasoned teak wood new short rail of size 25mmx100mmx900mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03, FD-30/239/273

Removing old unserviceable legs of Table Dining 6 Persons and S&F well seasoned teak wood new leg of size 75mmx40mmx760mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03, FD-30/239/273

Removing old unserviceable wooden stiffner of Table Dining 6 pers and S&F well seasoned teak wood new stiffner 100mm x 900mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03 FD-30/239/273

Removing old unserviceable wooden brackets of Table Dining 6 Persons and S&F new well seasoned teak wood brackets of size 50mmx50mmx25mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03, FD-30/239/273

Removing old unserviceable PVC Hard Rubber Rings of Table Dining 6 Persons and S&F new PVC Hard Rubber rings of size 25mm dia of best quality fixed with screw all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD/Map/II/03, FD-30/239/273

M&L all applicable portion of Table Dining 6 persons shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge.Ref Drg 384/248. All as specified and directed by Engineer-in-Charge.

Table Dining 8 pers FD-30/239/273 Removing old unserviceable Top of Table Dining 8 persons and S&F new top complete of size 1800mmx900mm made of pre-laminated 18mm thick MDF Board wiith 4mm thick teak wood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

Removing old unserviceable long rail of Table Dining 8 persons and S&F well seasoned teak wood new long rail of size 45mmx90mmx1200mm all as specified and shown on drg/ directed by Engineer-in-Charge.Ref Drg No FD-30/239/273

Removing old unserviceable short rail of Table Dining 8 persons and S&F well seasoned teak wood new short rail of size 45mmx90mmx900mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

Removing old unserviceable legs of Table Dining 8 persons and S&F well seasoned teak wood new leg of size 90mmx45mmx750mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

Removing old unserviceable PVC Hard Rubber Rings of Table Dining 8 pers' and S&F new PVC Hard Rubber rings of size 25mm dia best quality fixed with screw all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

Removing old unserviceable wooden brackets of Table Dining 8 persons and S&F well seasoned teak wood new brackets of 100mmx100mmx35mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

Removing old unserviceable wooden stiffner of Table Dining 8 pers and S&F well seasoned teak wood new stiffner of 90mmx25mmx900mm all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD-30/239/273

M&L all applicable portion of Table Dining 8 persons shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg 239/273. All as specified and directed by Engineer-in-Charge

Table office Officers steel FD-1003/ Similar pattern by removing the existing unserviceable part and S&F following similar new parts as per Drg Removing old unserviceable Top of Table office Offrs and S&F new top complete of size 1680mmx760mm made of pre-laminated 18mm thick MDF Board wiith 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old Unserviceable Drawers and S&F new drawers all as specified, shown on Drg No Fd-1003 and directed by Engr-in-charge.

Removing old unserviceable Shutter with hinges and S&F new shutter with hinges all as specified, shown on Drg No Fd-1003 and directed by Engr-in-charge

Removing old Unserviceable Top/bottom long stiffner and S&F new top/bottom long stiffener all as specified, shown on Drg No Fd-1003 and directed by Engr-in -charge

Removing old unserviceable leg and S&F new Leg all as specified & shown in drg and directed by Engg-in Charge. Ref Drg No FD-1003

Removing old Unserviceable Top/bottom short stiffner and S&F new top/bottom short stiffener all as specified, shown on drg and directed by Engr-in -charge

Removing old unserviceable Locks and S&F new locks 75mm, 6 lever all as specified, shown on Drg No Fd-1003 and directed by Engr -in-charge.

Removing old unserviceable rubber shoe and S&F new rubber shoe all as specified, shown on Drg No Fd-1003 and directed by Engr -in-charge

Preparation of exisiting decorated surface/rubbibg by emery paper, removing all spots filings all cavity with putty and one coat of synthetic enamel paint for repaired and exisiting good furniture and directed by Engr -in-charge

M&L for running welding (not exc 25 mm each) of steel items including scraping, preparing surface of welded portion by griding all as directed by Engr-in-chrge

Table office clerk steel Fd-1004/similar pattern removing the exisiting unsv parts and S&F following new part as per Drg Removing old unserviceable Top of Table office Offrs and S&F new top complete of size 1200mmx600mm pre-laminated 18mm thick MDF Board wiith 4mm thick teak wood bidding of semi round shape all round the top of table all as specified and shown on drg/ directed by Engineer-in-Charge.

Removing old Unserviceable Drawers and S&F new drawers all as specified, shown on Drg No Fd-1004 and directed by Engr-in-charge

Removing old unserviceable Locks and S&F new locks all as specified, shown on Drg No Fd-1004 and directed by Engr -in-charge

Removing old unserviceable legs and S&F new legs all as specified, shown on Drg No Fd-1004 and directed by Engr -in-charge.

Removing old Unserviceable Top/bottom long stiffner and S&F new top/bottom long stiffener all as specified, shown on Drg No Fd-1004 and directed by Engr-in -charge

Removing old Unserviceable Top/bottom short stiffner and S&F new top/bottom short stiffener all as specified, shown on Drg No Fd-1004 and directed by Engr-in -charge

Removing old unserviceable rubber shoe and S&F new rubber shoe all as specified, shown on drg No FD-1004 and directed by Engr -in-charge.

Preparation/cleaining of exisiting decorated surafce/rubbing by emery paper, removing all spots fillings all cavity with putty one coat of synthetic enamel paint for repaired and exisiting good furniture .

Material and lanour for running welding (not exceeding 25 mm each) of steel items including scrapping preparing surface of welded portion by griding all as directed by Engg-in-Charge

Table 3'x2' steel FD-1008, 1007 similar patern, removing the existing unserviceable part and S&F following similar new part as per Drg . Removing old unserviceable Top of Table 3 x 2 steel and S&F new top complete of size 900mmx600mm made of pre-laminated 18mm thick MDF Board wiith 4mm thick teakwood bidding of semi round shape all round the top of table all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable leg and S&F new Leg all as specified & shown in drg and directed by Engg-in Charge.

Removing old unserviceable rubber shoe and S&F new rubber shoe all as specified, shown on drg No FD-1008, 1007 and directed by Engr -in-charge

Removing old Unserviceable Top/bottom long stiffner and S&F new top/bottom long stiffener all as specified, shown on Drg No Fd-1008,1007 and directed by Engr-in -charge

Removing old Unserviceable bottom short stiffner and S&F new top/bottom short stiffener all as specified, shown on Drg No Fd-1008, 1007 and directed by Engr-in -charge

Removing old Unserviceable Top long rail and S&F new top long rail all as specified, shown on Drg No Fd-1008, 1007 and directed by Engr-in -charge

Removing old Unserviceable Top short rail and S&F new top short rail all as specified, shown on Drg No Fd-1008, 1007 and directed by Engr-in -charge

Removing old unserviceable Locks and S&F new locks 75mm 6 lever all as specified, shown on Drg No Fd-1008, 1007 and directed by Engr -in-charge.

Removing old Unserviceable Drawers and S&F new drawers all as specified, shown on Drg No FD-1008 and directed by Engr-in-charge

Preparation /cleaning of existing decorated surface / rubbing by emery paper, removing all spots, filling all cavity with putty and applying one coat of synthetic enamel paint on repaired and existing good furniture

M&L for runnning welding (not exceeding 25mm each) on steel items including scraping preparing surface of welded portion by grinding all as specifed and directed.

VISHWAS ENTERPRISES (BID ID -3213928)

Mahesh Traders (BID ID -3210196)

M/s REETA ENTERPRISES (BID ID -3216999)

Shivam Enterprises (BID ID -3213714)

Bidder Name

Mahesh Traders

GAJANAN SALES CORPORATION

M/s REETA ENTERPRISES

Shivam Enterprises

VISHWAS ENTERPRISES