Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹21.2 CrAccepted-Finance MATERE HOUSE SEC NO 14 PRADHIKARAN PUNE MAHARASHTRA INDIA 412105 | PUNE | MAHARASHTRA | 412105 | ₹21.2 Cr | 1 | Accepted-Finance l-1 |
| 2 | 2₹21.7 CrRejected-Finance | ₹21.7 Cr | 2 | Rejected-Finance h |
| 3 | 3₹22.2 CrRejected-Finance | ₹22.2 Cr | 3 | Rejected-Finance h |
| 4 | 4₹22.2 CrRejected-Finance MU PO SANGAMNER TA SANGAMNER DIST AHILYANAGAR MAHARASHTRA | SANGAMNER | AHILYANAGAR | MAHARASHTRA | ₹22.2 Cr | 4 | Rejected-Finance h |
| 5 | Rejected-Technical | - | - | Rejected-Technical Column No. 24, 25, are Not clear |
Tender Value
₹19.9 Cr
EMD Value
₹9.9 L
Closing Date
16 Sept 2021, 6:00 pmClosed
Executive Engineer Public Works Division Sangamner
Office of the Executive Engineer Public Works Division Sangamner
Improvements and Four Laning to National Highway No.60 to Sangamner Kh. Sangamner Bk Ghulewadi to National Highway No.60 Road (Old National Highway No.50) (S.H.71A) Km. 0/00 to 9/900 Tal.Sangamner Dist.Ahmednagar
2021_PWR_714729_1
PWD SGM/ Notice No.20 for 2021-2022-2
Open Tender
Civil Works - Roads
720 days
TAL.SANGAMNER
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,540
₹9.9 L
Chief Engineer P.W.Region Nashik
21 Dec 2021
23 Aug 2021
20 Sept 2021
23 Aug 2021
16 Sept 2021
23 Aug 2021
3 Sept 2021
Amount
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 milimetre, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 milimetre in thickness.
Cutting down trees including trunks and branches with girths above 30centimetre to 60centimetre and stacking the materials neatly with all lifts and lead of 1000metre as directed and earth filling in the depression / pit if any.
Cutting down trees including trunks and branches with girths above 60 centimetre to 90 centimetre and stacking the materials neatly with all lifts and lead of 1000 metre. as directed and earth filling in the depression/pit if any.
Cutting down trees including trunks and branches with girths above 90 centimetre to 180 centimetre and stacking the materials neatly with all lifts and lead of 1000 metre as directed and earth filling in the depression/pit if any.
Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts excetra complete.
Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts excetra complete.
Dismantling brick masonry in lime or cement mortar and stacking the materils as directed with all leads, lifts excetra.
Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts excetra.
Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately excetra complete.
Removing wire fencing with iron/ Cement Concrete fencing post and stacking the materials as directed with all leads, lifts excetra complete.
Removing iron pipe raling having wooden Reinfroced Cement Concrete or Cement Concrete or iron post and stacking the materials as directed excetra complete.
Removal of telephone / Electric poles including excavation and dismantling of foundation concrete and lines under the supervision of concerned department, disposal with all lifts and up to a lead of 1000 metres and stacking the serviceable and unserviceable material separately
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed.
Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils.
Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, inclusive from the site of excavation to the site of deposition as directed.
Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre not less than 97% of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with Power roller.
Providing earth work in embankment with approved materials obtained from departmental sources upto lead of 50 metre. including all lifts, laying in layers of 20 centimetre. to 30 centimetre. thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density excetra complete ( Material obtained from departmental Land)
Supplying hard murum/ kankar at the road site, including conveying and stacking complete.
Spreading hard murum/ soft murrum/ gravel or kankar for side width complete
Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering excetra complete.
Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material
Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver.
Prime coat - Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including cleaning of road surface and spraying, primer at the rate of 0.60 Kilogram/Square Metre using mechanical means.
Providing and applying tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on Black Topped surface 2.5 Kilogram/10 Square Metre.(VG-30 bulk bitumen rates are considered to arrive at rates)
DENSE BITUMINOUS MACADAM: Proving and laying dense bituminous macadam using crushed aggregates of Grading 1, premixed with bituminous binder of specified grade of Bitumen @ 4.50 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired density for 76-100 milimetre compacted thickness .USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler.(VG- 30 bulk bitumen rates are considered to arrive at rates)
BITUMINOUS CONCRETE:- Providing and laying bituminous concrete using crushed aggregates of grading 1, premixed with bituminous binder @ 5.20 per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 milimetre compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver, Vibratory roller with Stone Dust filler. (VG-30 bulk bitumen rates are considered to arrive at rates)
Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed excetra complete. ( By /manaual Means )
Providing rubble filling of trap/ granite/ quartzite gneiss stones for foundations including filling voids with sand/grit and compaction etc complete.
Providing and laying in situ / ready mix cement concrete of M-15 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing excetra complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications ( VSI sand finely washed etc )
Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all Reinforced Cement Concrete works as per detailed drawings excetra complete.
Providing cast in situ / ready mix M25 grade cement concrete for head walls of Cross Drainage work / retaining walls excetra including necessary form work, compaction, finishing and curing excetra complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
Providing and laying weep holes of 100 milimetre diameter Poly Vinaly Chloride pipes as per drawing for abutment returns, return walls excetra Complete.
Providing cast in situ / ready mix M20 grade cement concrete for head walls of Cross Draingae work / retaining walls excetra including necessary form work, compaction, finishing and curing excetra complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA
Providing and laying pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and technical specifications excetra complete. (by stone/boulder)
Providing and laying concrete pipes of I.S.NP. class of 300 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
Providing and fixing heavy duty inter locking concrete Grey paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Square.centimetre. of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning excetra complete.
Road Delineators: Supplying and installation of delineators (Roadway Indicators, Hazard markers, Object markers) 80 to 100 centimetre high above ground level, painted black and white in 15 centimetre wide strips, fitted with 80x100mm rectangular or 75 milimetre diametre Circular reflectorised panels at the top, buried or pressed into the ground and confirming to Indian Road Congress 79 and the drawings
Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square metre made out of 2 milimetre aluminum sheet bonded with white retro reflective sheeting of Class C (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress :67-2012 Table Number 8.3, supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with two coats of grey stove enamel paint and supported on one Number mild steel angle iron post 75 milimetre x 75 milimetre x 6 milimetre, 3.5 metre long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 centimetre x 45 centimetre x 60 centimetre, 60 centimetre below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimetre width including Galvanized Iron fixures and transportation excetracomplete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area greater than 0.9 square metre made out of 2 milimetre aluminum sheet bonded with white retro reflective sheeting of Class C (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress :67-2012 Table Number 8.3, supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with two coats of grey stove enamel paint and supported on two Number mild steel angle iron post 75 milimetre x 75 milimetre x 6 milimetre, 3.5 metre long firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 centimetre x 45 centimetre x 60 centimetre, 60 centimetre below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 centimetre width including Galvanized Iron fixures and transportation excetracomplete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Road Marking with Hot Applied Thermoplastic Compound with Reflectorizing Glass Beads on Bituminous Surface- Providing and laying of hot applied thermoplastic compound 2.5 milimetre thick including reflectorizing glass beads @ 250 grams per Square Metre area, thickness of 2.5 milimetre is exclusive of surface applied glass beads as per Indian Road Congress 35 .The finished surface to be level, uniform and free from streaks and holes.complete.
Providing and fixing Mandatory/Regulatory sign boards in circular shape of 900 milimetre diametre made out of 2 milimetre aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per Indian Road Congress:67-2012 Table No 8.3 Supported with back support frame 25 milimetre x 25 milimetre x 3 milimetre, duly painted on back side with grey stove enamel paint and supported on one Number of Mild Steel. angle iron post of size 65 milimetre X 65 milimetre X 6 milimetre, 3.45 metre long, duly painted with with flat oil paint having alternate black and white bands of 25 centimetre width including Galvanized Iron. fixtures excetra; fixing the boards in M25 grade concrete block of size 60 centimetre X 60centimetre X 75centimetre including transportation etc; complete. Class C ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut- out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and fixing Cautionary/Warning sign boards in Equilateral Triangle size of 900mm made out of 2mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type XI Micro prismatic grade sheeting) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3 Supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with grey stove enamel paint and supported on one Number of M. S. angle iron post of size 65 mm X 65 mm X 6 mm, 3.45 m long, duly painted with with flat oil paint having alternate black and white bands of 25 cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cm X 60cm X 75cm including transportation etc; complete. ClassC ( Type XI Micro prismatic grade sheeting) shall have 10 years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut- out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.
Providing and fixing Mandatory / Regulatory sign board of circular shape of size 60 cm. dia. prepared on 16 gauge M.S. sheet including painting with zinc chromate stoving primer and two coats each of white back ground,red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border, coated with non pealable crystal clear protective transparent coat retaining 100% relection including one number of M.S. Angle iron post of size 50 x 50 x 5 mm of 3.45 m. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 cm. fixing board and post with 2 Nos. high strength G.I. bolts and nuts of size 10 mm dia. and 20 mm long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size excetra complete. circular shape of size 60 cm. dia. M.S. sheet with Retro reflective sheet Engineering grade
Providing and fixing road junction/information sign boards of size 1.80 x 0.90 Meter Prepared 16 guage Mild Steel.sheet on frame of Mild .Steel angle of size 35 x 35 x 5 milimetre with cross bracing of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral /arrows, coated with non pealable crystal clear protective transperent coat retaining 100% reflection including two angle iron post of size 65 x 65 x 6 milimetre of 3.65 metre. long inflated at bottom ,drilled on top and painted in white and black bands of 30 centimetre with 4 Numbers high strength Galvanized Iron bolts and nuts of size 10 milimetre diametre and 20 milimetre long. Sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in- charge excetra complete. Mild Steel Board with Engineering Grade.
Providing and fixing Road junction / Information sign board of size 0.90 metre x 0.60 metre prepared on 16 gauge Mild Steel sheet with angle iron frame of size 35x35x5 milimetre including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 milimetreof 3.65 metre long inflated at bottom drilled on top and painted in white and black bands of 30 centimetre with 4 Numbers. high strength Galvanzied Iron bolts and nuts of size 10 milimetre diametre and 20 milimetre long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge excetra complete. Mild Steel Board with Engineering Grade.
Providing and fixing National Highway/ State Highway Route Marker size 60 centimetre x 45 centimetre with one Number direction plate of size 30 centimetre x 25 centimetre prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stove enamelled, bonded with cut out of red Retro reflective sheet Engineering grade, border / letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one number of Mild Steel Angle iron post of size 50 x 50 x 5 milimetre of 3.65 metre. long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 4 Numbers. of high strength Galvanized Iron bolts and nuts of size 10 milimetre diametre and 20 milimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size as directed by Engineer-in-charge excetra complete. Mild Steel Route Marker with Engineering Grade
Providing and fixing Reinforced Cement Concrete 5th Kilometre stones as per Indian Road Congress standard including fixing in standard size in Cement Concrete 1:4:8 block including curing, painting lettering excetra complete.
Providing and fixing 1:2:4 ordinary Kilometre stones as per Indian Road Congress. standard including fixing in standard size in Cement Concrete 1:4:8 block including curing, painting lettering excetra complete.
Providing and fixing Reinforced Cement Concrete 200 metre. stones as per Indian Road Congress. standard including fixing in standard size in Cement Concrete 1:4:8 block including curing, painting lettering excetra complete.
Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat's Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 Kilogram tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 milimetre, 100 milimetre and 102 +/- 2 milimetre and with minimum reflective area of 13 Square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 milimetre and height not less than 30+/- 2 milimetre) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer.
Metal Beam Crash Barrier -- Type - B, THRIE : Metal Beam Crash Barrier (Providing and erecting a Thrie metal beam crash barrier comprising of 3 milimetre thick corrugated sheet metal beam rail, 85 centimetre above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 milimetre spaced 2 metre centre to centre, 2 metre high with 1.15 m below ground level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 milimetre, 546 milimetre long complete as per clause 810)
Providing and applying two coats of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) excetra complete.
Excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed excetra complete. ( By Mechanical Means )
Excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed excetra complete.
Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing excetra complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications ( VSI sand finely washed excetra )
Providing and laying cement concrete pipe of Indian Standrad 458:2003 NP-4 class of 1200 milimetre diameter in proper line, level and slope excetra complete.
Providing cast in situ / ready mix M10 grade cement concrete for head walls of Cross Drainage work / retaining walls excetra including necessary form work, compaction, finishing and curing excetra complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications ( VSI sand finely washed etc ), cement 4.40 bags/cubicmetre)
Providing and fixing stream lined M-20 grade Reinforced Cement Concrete guard stone including mild steel bar reinforcement excetra complete.
Excavation for foundation in soft rock including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed excetra complete.
Excavation for foundation in hard rock by chiselling and wedging or line drilling including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed excetra complete.
Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds excetra as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump excetra complete. (prior approval of Superintending Engineer will be necessary)
Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing excetra complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer) with natural /artifical sand)
Providing and laying in situ / ready mix M-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings excetra including provision of "V" shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in Cement Mortar 1:3 excetra complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 metre in followinh manners
Providing and filling annular space around footing in rock by using concrete of M15 grade excetra complete.
Providing and laying in situ / ready mix controlled M-25 cement concrete of of trap / granite / quartzite/ gniess metal for reinforced cement concrete caps over piers and abutments including necessary sacffolding plywood/steel formwork, compacting by vibrating, finishing in Cement Mortar 1:3 and curing excetra complete ( Excluding reinforcement)With reversible drum type mixer/ concrete batch mix plant (pan mixer) . with fine agreegates of required specifications ( VSI sand finely washed excetra )
Providing and laying in situ / ready mix M-40 cement concrete of trap / granite / quartzite/ gniess metal for reinforced cement concrete block below the bearing including necessary scaffolding, plywood/steel formwork, compaction by vibrating, finishing in Cement Mortar 1:3 and curing complete (Excluding reinforcement) Using reversible drum type mixer/ concrete batch mix plant (pan mixer) with fine agreegates of required specifications ( VSI sand finely washed etc )
Back filling behind abutment, wing wall and return wall as per drawings and technical specifications excetra complete. (by granular material)
Providing and fixing neoprene bearing as per detailed drawings excetra complete.
Providing expansion joints with 25 milimetre thick bituminous pad as per detailed drawings excetra complete.
Providing and laying in situ / ready mix M-30 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete work in solid/ deck slab excetra including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement excetra complete. (with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed excetra )
Providing and laying 0.90 meter thick metal mat consisting of rubble, oversize metal and normal size metal in specified thickness as per detailed drawing including supplying all materials, hand packing of rubble, spreading metal in layers and hard murum including watering and compaction with power roller excetra complete.
Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struttingexcetra complete. (Lift upto 1.50 metre) By Manual Means
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer)excetra complete. With fine aggregate (Crushed sand VSI Grade)
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compactingexcetra complete.
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions excetra including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel)excetra complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)excetra complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)excetra complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for Reinforced Cement Concrete beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)excetra complete. With fine aggregate (Crushed sand VSI Grade)
Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for Reinforced Cement Concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing excetra complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer)excetra complete. With fine aggregate (Crushed sand VSI Grade)
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches excetra as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffoldingexcetra Complete
Providing and fixing mild steel grill work for windows, ventilatorsexcetra 20 Kilogram/Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding excetra complete.
Providing and applying two coats (exterior quality) of flat oil paint of approved colour and shade to the plastered surface in buildings and workshops including scaffolding if necessary, cleaning the surface and preparing surfaceexcetra complete. (excluding primer coat)
Swastik Infra-Logic (India) Pvt Ltd
S K Yewale And Co
M/s N.K. Gade
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid