Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹16.9 L+₹1.3 L (8.08%)Rejected-Finance MOURYA HEIGHTS SATAVNAGAR HANDEWADI ROAD HADAPSAR PUNE 28 | PUNE | MAHARASHTRA | 411028 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹17.4 L+₹1.8 L (11.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹18.5 L+₹2.8 L (18.2%)Rejected-Finance 401 SHRINAT HEIGHTS HADAPSAR ROAD SURVEY NO 97 MANJARI BK HAVELI PUNE 412307 | PUNE | MAHARASHTRA | 412307 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹18.8 L+₹3.2 L (20.5%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹31.1 L
EMD Value
₹62,100
Closing Date
18 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH PUNE
Garrison Engineer North General Cariappa Marg Camp Pune 411001
GE (N) P/TOKEN- 61 OF 2023-2024 SPL REPAIR TO EXISTING DRAIN ADJACENT TO EXISTING BOUNDARY WALL FROM TRAINING AREA TO 25 QUEENS GARDEN AND ADDN / ALTN OF TOILET AT 1A NEHRU MARG IN THE AREA OF AGE B/R (EAST) UNDER GE (N) PUNE
2023_MES_615279_1
GE (N) P/TOKEN- 61 OF 2023-2024
Open Tender
Civil Works
Item Rate
240 days
GE NORTH PUNE
Refer tender documents.
8 documents required · 8 mandatory
₹500
GE NORTH PUNE
₹62,100
Yes
12 Dec 2023
23 Aug 2023
25 Sept 2023
23 Aug 2023
18 Sept 2023
6 Sept 2023
24 Aug 2023 - 31 Aug 2023
Amount
Dismantling wrough iron or mild steel work of any description not otherwise provided for drain grill covers & cattle trap.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.
Demolition Concrete of any description and in any position not otherwise specifically provided.
Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation.
M&L for Pre-cast cement concrete block masonry with solid blocks, PCC type B1 1:2:4 (using 20 mm graded stone aggregate) exc. 10 cm in width and setting in CM 1:4 complete.
M&L for Cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains commplete all as specified and directed.
M&L for extra for forming fair finished drain or channel in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc.
M&L for PCC type B1 1:2:4 (using 20 mm stone aggregate) in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for 15 mm thick cement plaster in CM 1:4 on brick or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified & directed.
M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for two coat synthetic enamel paint over a coat of red oxide primer on steel surfaces ( gratings, grills).complete all as specified and directed.
Removing excavated material not exc. 500mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point.
Surface excavation not exc. 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.
Excavation in trenches n.exc 1.5m wide and n.exc 1.50m deep and getting out avg soil.
M&L PCC (1:4:8) type D2 using 40mm graded aggregate in foundation.
M&L for Hardcore of stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface.
M&L for 100mm thick PCC (1:4:8) type D-2 using 40mm size stone agreegate in sub-base of floor.
Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm in soils.
Removing excavated material not exc. 250mtrs and depositing where directed at a level not exc. 1.50mtrs above the starting point.
M&L old size brick fly ash bricks straight or curbed on exc 6M mean radius built in CM 1:6
M&L for machine cut cudappah stone slab 20-25mm thick, laid over & including 15mm thick cement mortar 1:4 screed base, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for 15mm thick cement plaster in CM 1:4 on bricks on concrete surfaces finishing the surfaces even and smooth without using extra cement with two coats of exterior acrylic emulsion paint over a coat of primer incuding preparation of new surface all as specified.
M/L for 15mm thick plaster in CM 1:6 on fair faces of concrete surfaces finished even and smooth w/o using extra cement on internal surfaces of walls preparation of new surfaces of walls and apply two coat of OBD over a coat of primer complete.
S&F for mild steel hollow mild steel section for structural work in round or rectangular tube section as in main and cross beams, hip and jack rafters purlins, colum post where connected to common rafters including MS flat iron wind tiles drilled for fixing , angle cleats or other connecting plates as per IS 4923-1968 complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S&F Pre painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /clading to wall and two corrugated side overlap fixed with self taping screws as specified .
M&L position suspended false ceiling system using T- grid suspended ceiling grid system. The size of grid shall be 600x 600mm with GI frame work main runner 38x24mmx3600mm, cross tee 25x24x600mm / 25x24x1200mm and wall angle 24x24x2540mm (thickness of the material of 0.30 mm) , using 9mm thick ceiling panel laminated with PVC film on front face and foil back avilable in due drop texture aas per IS -2095, part-I-1996, fixed in the grid of T- grid suspended ceiling grid system duly suspended by 4mm dia GI bar hanger from the purlins of the roof with butter fly clips all as specified and directed by Engr - in- charge ..Make:- Geproc / armstrong.
S&F Aluminium powder coated louvered ventilator using rectangular tube of size 63.5X52X1.5mm thick, blades set, with provision of exhaust fan using aluminium section heavy duty including glass 4mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc.
Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
S&F for angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S&F for chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.
S&F for Brass Chromium plated towel ring all as specified and directed. Make: Jaquar Cat No AEC-1121 or of equivalent make as per Appx 'A' as approved by GE
S&F for Two Way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified. Make Jaquar Cat Part No FUS-29041 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.
S & F for Brass Chromium plated towel rail all as specified and directed. Make: Jaquar Cat No AEC-1111B or of equivalent make as per Appx 'A' as approved by GE
Factory made PVC Flush door of 33 to 35 mm thick overall thickness comprising of 19 SWG MS tube of size 19 x 19 mm (19 gauge) covered with 5mm thick PVC Sheet, (any colour as approved) on both sides core shall be filled with 19mm to 20mm thick PVC solid board taking down with existing one complete all as specified.Note : All screws shall be self tapping chroming plated all as specified and directed by Engineer-in-Charge.
Factory made 100 % solid wood plastic composite(WPC) door frame, single rivet 90 mm x 45 mm made from wood plastic composite (Single extruded process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.
S & F for brass Chromium plated soap dish(Polycarbide) , fixed to wall with CP brass screws, all as specified and directed. Make: Jaquar Cat No AEC-1133 or of equivalent make as per Appx 'A' as approved by GE
S/F for stainless steel butt hinges 100mm complete all as specified and directed. NOTE:- all screws shall be self tapping chrome plated and length of screws not less 38mm coplete all as directed and specified.
M&L GI tubing 15mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.
M&L Cutting chases, pinning in, making good to facings where required in stone walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth complete all as specified and directed by Engr-in-Charge.
M&L GI tubing 20mm dia with all fittings and fixed complete to walls ceilings or laid in floors of medium grade.
S&F PVC (SWR) floor Trap, plain with grading of dia outlet 100mm dia incl fixing .
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to walls.
S/F PVC (SWR)vent cowl of size 110mm bore
S/F for glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.
S/F PVC connection 15mm bore with two nuts and washers of PTMT of length 450mm all as specified.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified.
M&L Textured heavy duty exterior tiles of size 300mm x300mm x 10mm thick , set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including a screed bed in CM (1:4) including demolition of existing tiles complete all as specified. make ;- Jonhson Endura textured design or equivalent of kajaria /Somany).
M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base.
S&F vitreous china wash hand basin white of bowl size 550mm x 440mm including waste coupling and PVC waste pipe 32mm dia, pillar tap cast copper alloy with capstan heads chromium plated fancy type for 15 mm bore pipe, including M S brackets complete all as specified. Cera/Prayag/Johnson Pedder.
S&F 15mm dia brass chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified. [Make : JAGUAR or equivalent in Plumber/Ess Ess]
S&F Vitreous china Urinal, Half stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including Cp Urinal spreader for fixing with 15 mm dia pipe complete all as specified. Cera/Prayag/Johnson Pedder.
Supply and fix in repair for corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.
Supply and fix for hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1 metre long flexible tube & wall hook, Cat No. ALD-CHR-593N of make Jaquar or of equivalent make as per Appx 'A' as approved by GE complete all as specified and as directed.
S&F Toilet paper holder of stainless steel, all as specified and directed. Make: Johnson Fusion series Cat part No: T3254C or equivalent as approved by the GE.
S/F 20 mm dia stop valves cast copper alloy, screwed down, high pressure with crutch or butter fly handles, screwed both endsfor iron pipe
S&F Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified.Cera/Prayag/Johnson Pedder.
S&F 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float and handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Cera/Prayag/Johnson Pedder.
S&F wall mixer brass chromium plated quarter turn 2 in 1 with bend pipe with provision for over head shower with bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Johnson VIVA series Cat part No: T4821C or of equivalent make as per Appx 'A' as approved by GE.
S&F cast copper alloy CP shower arm square 230mm long with flange complete all as specified and directed by Engr-in-charge. Make : Make : Johnson Cat part No: S0001C1 or of equivalent make as per Appx 'A' as approved by GE.
S&F brass chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing with arm/ pipe all as specified. Make: Johnson Cat part No: S0006C or of equivalent make as per Appx 'A' as approved by GE.
M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH Cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-
(a) One light / fan controlled by one switch one way.
(b) Socket outlet 05 Amp on same board.
(c) Socket outlet 05 Amp on independent board.
S&F modular switch 01 way 6 Amp , 01 module ISI marked complete
S&F modular socket 6 Amp , 2 module ISI marked complete
S&F ceiling rose surface Bakelite 3 terminals 230V 50 Hz ISI marked.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to connector, making good disturbed surfaces complete all as specified and as directed. Make Jaquar cat No -LGLZ01X010XW , Orient Cat No- LBLN-10-C-SQ
S/F LED street light fitting 25 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make JAQUAR Cat No LSRTO4S025XC or equivalent of make Bajaj, Philips, Havells as approved.
S & F for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 3 to 4 hrs back up with out put of 2000 lumens , box type (decorative) light fitting, 230 volts with polycarbonate type body and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts complete all as specified and as directed. Make :- Halonix Cat part No.HLB-07-20-CW-INV ,Philips , Havells LHEXACP7FN1W020.
S&F in repair for MCB DB SPN 04 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning
Supply and fix exhaust fan, AC single Phase, working on input voltage 140-285 , of size 250 mm sweep, 1600 RPM, Power consumption16 W with BLDC Motor, blades, frame and louvers provision of 3 core 1.5 sq. mm copper conductor PVC insulated & PVC sheeted flexible wire from ceiling rose/connector to fan including making connections complete all as specified & as directed .
Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.
Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.
Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.
Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete all as specified and directed. cable of the 10 Sq mm 2 Core size.
Excavation in trenches, not exc. 1.5 mtr wide and not exc. 1.5 mtr in depth for foundation, etc in soft loose soil.
Returning, filling in, including spreading, levelling, watering and wall remming in layers not exc 25 cm.
Removing excavated material n.exc 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point.
Supply and fixing/laying in trenches steel tube medium grade with all fitting and fixed complete to wall, tubing and ceilings or laid in floor/ trench of 20 mm dia size.
Supply and fixing in replacement of gunmetal gate valve with iron wheel screwed both ends for iron pipe and fixed of 20 mm size.
M&L for straight plain brass ferrule (or connecting screw) screwed both ends and fixed suitable for 20 mm bore GI water tubing for tapping on line existing pipe line complete all as specified and directed
Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.
Gauri Associates
Parhar Enterprise
GS Associates
A.S.ENTERPRISES
M/s.BAJRANG CONSTRUCTION
M/s Asrani and sons
VIRENDRA FABRICATORS
N B ENTERPRISES
K.K.Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .