SPECIAL REPAIRS TO BLDG NO P8 GROUND FLOOR DIQA ADMINISTRATIVE OFFICE COMPLEX AT DGQA UNDER GE NORTH BANGALORE

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engineer-in-Charge.

Disconnecting existing tanks exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. Measured separately)

M&L 40mm Avg thick cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) as in roof padding including finishing cement concrete surface even and smooth without using extra cement.

M&L plastering 15mm thick over PCC padding concrete with CM 1:4 (including mixing with water proofing compound)

Supply only liquid water proofing compound

M&L for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg / Sqm reinforced with non woven polyster / HMHDPE matt black finished over compatible primer / bonding bitumen @ 0.40 Litr / Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. complete all as directed. including removal of existing roof treatment of any type, any thickness in any number of layers untill the mother slab is visible and disposing off at a distance exc 1.00 Km complete.

M &L providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span and other similar bands, parapets and railings upto 60 cm in height, copings, kerbs incl weathering slightly rounded or chamfered angles and throating as directed.

M & L providing 75mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) in plinth protection .

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off the premises complete all as specified and as directed.

M&L Vitrified tiles 10mm thick (square/rectangular), light / dark shade, polished, area of each tiles 600mm x 600mm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including screed bed 15 mm in CM 1:6, complete.

S&F non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of 15mm thick in CM 1:6 etc complete all as specified and as directed.

S&F coloured Glazed ceramic tile in verticle surface 350x250x7 mm/ 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick CM 1:4 backing coat complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed

M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including cutting and polishing including screed bed 15 mm thick screed bed in CM 1:4 set and jointed..

M & L providing 75mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in subbase.

M & L providing 25mm thick cement concrete 1:2:4 type B-1, (using 20 mm graded crushed stone aggregate) in base course.

S&F Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including screed bed 20mm thick in CM 1:6 complete all as specified and as directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface any sunk or raised moulding over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including preparation of newly plastered surfaces of ceiling and applying two coat of oil emulsion distemper, including one coat of alkali resistant primer including dismantling the unsv false ceiling with cover fillets complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling old unsv lining with fillet complete.

Taking down shutters of any description and refixing in the same opening exc 1 sqm but n. exc. 2 sqm etc complete all as specified and directed.

Taking down shutters of any description and refixing in the same opening exc 2 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n. exc 1.5 sqm etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm but n. exc. 4 sqm etc complete all as specified and directed.

S&F Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

M & L for factory made solid PVC moulded door shutter , 28 to 30mm thick (stiles) with Wood free EPS with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the foront face & 2mm plain colour PVC sheet on back face supplying and fixing in frame at site as per specification & drawing.

S&F powder coating aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief.

S&F Aluminium Deco grill of any design of (Jindal / Hindalco) including 'U' clips and necessary fixing arrangements all as specified and as directed.

S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

S&F in repairs aluminum (extruded section body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

S&F in repairs fanlight pivot of cast brass with plate size 25mmx 65 mm and suitable for shutter of 35mm thickness and fixed

S&F 9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, as in aluminum partition including cleat angle, aluminium snap beading for glazing / paneling, CP brass / stainless steel screws complete all as specified ans as directed by Engr-in-charge.

S&F 5mm thick sheet glass, ordinary quality and glazing with screw in square exc 0.5 sq. m in each pane

S&F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

S & F stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

S & F in repairs stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples.

M&L for 10mm toughned frosted glass as in hinged doors, including S/S handle 300mm long , door buffer, S/S 'U' clip, locking arrangement as in partitions automatic doors and similar work including cutting to shape, drilling holes required complete.

S&F 25 mm thick IInd class hard wood glazed and skelton shutter as in doors open rebated and prepared to receive glass , gauge etc, but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any number sto squares with plain, chamfered or rounded mittered and rebated sash bars any numbers, edges of framing plain chamfered

S&F mild steel medium weight 100 mm butt hinges for doors complete all as specified.

S&F 125 mm long aluminium alloy handles, fabricated type anodised

S&F 150 mm long aluminium alloy fancy type handles, fabricated type anodised

S&F 150 mm long aluminium anodised barrel tower bolts and extrude section and fixed.

S&F 200 mm long aluminium anodised barrel tower bolts and extrude section and fixed.

S&F 75 mm brass handles,cast type polished bright complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed.

S&F 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.

M&L preparation of new or previous untreated surface of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Pre-cast cement concrete block masonry, type C1 1:3:6(using 20mm graded aggregate) in CM 1:6 with solid blocks,exc 10cm in width and setting in mortar, complete.

M&L for RCC (1:2:4) nominal mix type B-1 using 20mm graded stone aggregate as in shelves,bases for water tanks, roof landing etc complete all as specified (including demolition).

M&L for form work to soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mm thick complete.

M&L for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Taking down cement plaster of any description including raking out joints,hacking for key,scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling of concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for rendering 10mm thick in CM 1:6 on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint, including one coat of white washing primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of and applying three coats of white wash on ceiling surfaces

Providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth.

M&L for preparation of newly plastered surfaces of walls and applying two coat of oil emulsion distemper, including one coat of alkali resistant primer complete all as specified and as directed.

Complete removal of existing treatment of any description over 10cm girth or width and applying two coat of plastic emulsion paint over a coat of primer over 1mm thick wall care putty complete all as specified and as directed

M&L for preparation of old decorative surfaces of walls and applying one coat of cement base paint,complete all as specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on ceilings including in narrow widths / bands etc complete all specified and as directed.

M&L for preparation of old decorated surfaces and applying one coat of white wash on walls including in narrow widths / bands etc complete all specified and as directed.

M&L for preparation of old distempered surfaces of walls and applying one coat of Oil bound distemper complete all as specified and as directed.

M&L for preparation of old distempered surfaces of ceiling and applying one coat of Oil bound distemper complete all as specified and as directed.

M&L preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.

S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S & F of CPVC pipes 25mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 20 mm GI pipe complete all as specified

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe complete all as specified and as directed.

S&F in repairs stop / angle valves 15 mm nominal bore, brass, chromium plated, complete, fixed in repairs, all as specified and directed .

S&F in repairs 75mm dia PVC (SWR) floor / Nahani trap, plain with grating including solvent cement

S&F in repairs 75mm dia PVC (SWR) multi floor/Nahani trap, plain with grating including solvent cement

S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.

S&F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including CI/PVC/Vitreous china 'P' or 'S' trap , 110 mm dia PVC(SWR) WC connector and 75 mm dia pipe required length for Nahani trap along with grating complete all as specifed and as directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including vitreous china 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified

S&F in repair PVC low level flushing cistern 10 ltr capacity, valveless, syphonic action type with inlet, ball valve float and handle incl brakcet and flush pipe 32 mm dia.

Supply only plastic water closet seat cover, White, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specifed and as directed.

S&F in repairs vitreous china wash hand basin, white, oval type including one number brass CP waste coupling, waste pipe, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.

Supply only 15 mm bore Pillar taps (self closing) , fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

S&F in repairs vitreous China urinals, half stalled type white , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating, PVC waste pipe and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F in repairs Vitreous china urinal partition white of size 310x700 mm.

S&F Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms)

S&F urinal spreader of brass chromium plated for fixing with 15 mm dia pipe.

S&F, in repairs PVC connection 15mm , 450mm long complete all as specified and as directed.

S&F,in repairs 15mm size health faucet, ABS body , with wall hook and 1 metre stainless steel braided rubber hose pipe complete all as specified and as directed. (Cat Part No of Cera F8030105 AB or equivalent in parryware / hindware / prayag)

S&F in repairs toilet paper holder of stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs liquid soap dispeser / container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified.

S & F PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls including taking down of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including taking down of pipe and fittings complete all as specified and as directed.

S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in floors including taking down of pipe and fittings complete all as specified and as directed.

S& F in repair PVC bends any radius 110mm dia

S& F in repair PVC bends any radius with access door 110mm dia

S& F in repair PVC (SWR) branch piece, single (single Y) equal or unequal 110 mm dia

S & F PVC Stack clamp for holding 110 mm Dia PVC pipe as in position all as specified and directed.Make-Finolex / supreme

S & F in repair 1000 litrs capacity water tanks Rotational moulded polyethylenewater storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Supply only 25 mm bore Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete, fixed in repairs, all as specified.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms).

S&F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

S&F 25 mm PVC coated decorative fancy type curtain rod including brackets to hold rod in position, ABS finials, appropiate no of rings of approved quality etc complete.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete.

Taking down carefully aluminium/ copper wiring / power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets etc and making good the disturbed surface of walls, ceiling etc incl making good with finshes to match the existing surface complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes suitable for normal/modular concealed on walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following (a) One light point controlled by one switch

As per item No. 110 above but for One fan / Exhaust point controlled by one switch / regulator

As per item No. 110 above but for One 3 pin socket out let 5 Amps on independent board

As per item No. 110 above but for One 3 pin socket out let 5 A on same board

As per item No. 110 above but for One bell / buzzer point controlled by bell push

All as per Srl item No 110 here-in-before but for 16 Amps socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conductor multi stranded on independent board including provn of 2.5 Sqmm PVC insulated solid copper conductor continus as earth wire. Note for Item No 110 to 115 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring.

S&F ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed.

S&F switch piano flush type single pole one way 5 Amps.

S&F switch socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal all as specified and as directed.

S&F switch socket combination 5 pin 2 in 1, 5 A flush type all as specified and as directed.

S&F socket outlet 2 in 1, 3 pin 5 A all as specified and as directed.

S&F stepped type electronic fan regulator flush switch type all as specified and as directed.

Supply and Fix Modular switch 1 way 6A,1 module fixed in repairs.

Supply and fix Modular switch 1 way 16A, 1 module fixed in repairs.

Supply and Fix Modular Bell push 6A 1 module fixed in repairs.

Supply and fix modular Socket, 6A - 2/3 pin combined 2 module fixed in repairs.

Supply and fix modular Socket 6A/16A - 2/3 pin combined 2 module fixed in repairs.

Supply and fix modular type Fan step regulator, 120W - 2 module fixed in repairs.

S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLAB 20 WH LED P or its equivalent in CG / Havells / Philips.

S&F LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or its equivalent in CG / Havells / Philips.

S&F in repairs angle holder PVC/polycarbonate type all as specified and as directed.

S&F 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36W GZi WH or equivalent Makes & model in Havells / Philips / CG.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.

S&F in replacement of Vertical DB TPN 12 way suitable for MCCB upto 250 Amps as I/C, double door type 415 volts, IP :54 protection ,door earthing, isolated neutral bar, mechanical impact strength IK 09 with insulated bus bar assembly Make:- INDOASIAN Cat No. 812048 or its equivalent in standard / Havells.

S&F in replacement of MCB DB TPN 6 way suitable for MCCB TPN as I/C with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.

S&F in replacement of MCB DB SPN 4 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.

S&F MCCB 4 pole 415 volts 100 Amps 16 KA, fixed type including taking out old unserviceable MCCB complete all as specified and as directed

S&F in repairs MCB single pole 240 volts 5 to 32 Amps complete all as specified and as directed

S&F in repairs MCB SPN 240 volts 32 Amps complete all as specified and as directed

Supply & lay sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size PVC conduit incl removing the unsv cable complete all as specified and as directed. Note: Three runs of cable, one run of conduit will be measured as unit length.

Supply & lay sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size PVC conduit incl removing the unsv cable complete all as specified and as directed. Note: Three runs of cable, one run of conduit will be measured as unit length.

M&L XLPE insulated, sreened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 votls grade, cross sectionl area 50 Sqmm, 4 core laid in trenches incl removing the unsv cable complete.

M&L for GI tubing light grade 50mm with all accessories for cable protection fixed on poles/bldgs of laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

Supply and fixing LED 30 W building security light having high power LED with pressure die cast housing prismatic polycarbonate diffuser, IP 66 protection ingress protection and impact resistance of IK08. 4kV inbuilt surge protection with Top opening driver cover for easy maintenance. all as specified and as directed. Make:- Bajaj Cat No.ENXT P 30L WH SY PC SD or equivalent make in Havells / CG / Philips.

S&F Bracket made out of GI tubing medium grade 25/32 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. Make :- Bajaj / CG / Havells.

M&L down rod for ceiling fan with GI light grade 15 mm dia upto 1.5 mtr including nut, bolts, washers complete accessories all as per site requirement.

Supply and fix metal body exhaust fan AC single phase 230/240 V of size 225/300 mm sweep, 1325 RPM including making of hole on wall for suitable size of exhaust fan and making good complete all as specified and directed. Make: Bajaj, Model : Bahar or equvilant in CG/Havells.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with 240 Volts one single pole MCB 20 Amp.

M.S.Trading Company

SAI CONSTRUCTIONS

Aavani BUILDERS AND CONTRACTORS

M/S SIRI BUILDERS

Siddivinayaka Constructions

Sreyas Enterprises