WELCOME MAINTENANCE AND REPAIRS TO SANITARY FITTINGS PLUMBING FLOORING PLASTERING PLINTH PROTECTION AND CONNECTED WORKS IN ZONE A B AREA UNDER AGE BR N NO I OF GE NORTH SECUNDERABAD

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M & L for rendering 15 mm thick on brick work or concrete surfaces built in cement mortar 1:6 and finishing the surface smooth and even without using extra cement complete all as specified and as directed.

M & L for rendering 5 mm thick on concrete surfaces of ceiling in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparing the newly plastered wall surfaces and applying two coats of distemper oil emulsion over two coats of wall care putty complete all as specified and as directed.

M & L for preparing the newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

M & L for preparing the newly plastered surfaces of ceiling of any height and applying three coats of white wash complete all as specified and as directed.

M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on the walls, pillars, cornices of up to any height etc complete all as specified and as directed.

All as per Sl Item No 7 here-in-before but on ceiling' complete all as specified and as directed.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying one coat of oil bound distemper and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and as directed.

All as per srl item No.9 above but on ceilings complete all as specified and as directed.

M&L for preparation of old painted surfaces including brooming down or steel wire brushing scraping down smoke soot, moulds, moss: efforescent salts and trading oil, greasy spots and applying one coat of plastic emulsion and including wherever necessary filling of nail holes/ inequalities with Putty for smooth finish of any height .etc complete all as specified and as directed.

M&L for complete removal of existing treatment of old painted wall surfaces and applying 3.00 mm thick white cement based wall care putty smooth finish.etc of approved make & shade on walls and other places of up toany height complete all as specified and as directed.

M&L for applying one coats of priming with alkali resistant priming paint over the putty surface and pproved make & shade on walls of up to any height etc, complete all as specified and as directed.

M&L for applying two coats of oil bound distemper over the primer surface of approved make & shade on walls of up to any height etc, complete all as specified and as directed.

M&L for applying Two coat of plastic emulsion over the primer surface of approved make & shade on walls of up to any height etc, complete all as specified and as directed.

M & L for preparing the old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and as directed.

M & L for preparing the old painted steel surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and as directed.

Demolition of plain cement concrete (un reinforced) in ground floors and paving not exceeding 15 centimetre thickness (below or above ground level) complete all as specified and as directed

Dismantling of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregate as in sub base to floors complete all as specified and directed

Material and labour for polished Shahabad stone of thickness 20 to 30 mm, in floors laid over and including 20 mm thick cement screed bed in CM1:6, jointed and pointed in cement mortar 1:3, complete all as specified and as directed. Note: The size of stone shall be as directed by Engieer-in- Charge

M&L for 20 to 25mm thick machine cut and machine polished cudappa stone slab for kitchen plateform jointed and set in CM 1:3 and fixed including rounding to edge of stone slabs one side edge etc complete all as specified and as directed

M&L for 18-20mm thick granite(of any type) work table rubbed and polished as in floors laid over cement screed bed and jointed with grey cement slurry mixed with pigment to match the shade of of the slab including rubbing and including over 15mm thick screed bed or bedding layer in CM1:4 complete all as specified and as directed.

Material and labour for 25 mm thick granite (of any size) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over and including 15mm thick screed bed of 1:4 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed

Material and labour for rounding and grinding of edges of granite platform both side rounded and grinding the stone complete all as specified and as directed

Material and labour for cutting of granite slab for fixing of under counter wash basin including rounded and grinding the stone with necessary arrangments complete all as specified and as directed

M & L vitrified ceramic coloured tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles complete all as specified and as directed .

M & L non-skid ceramic coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles complete all as specified and as directed .

M & L non - skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in cement mortar 1:6 including dismantling of existing tiles complete all as specified and as directed .

Material and labour for glazed ceramic highlighter wall tiles of approved colour of size 350x250x7/ 450x300x7 mm thick on vertical surfaces as in dado/wall set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:4 including dismantling of existing tiles complete all as specified and as directed

M&L for preparation of existing kota stone / cement stone slab flooring at any position and polishing with machine to surfaces in two steps (1st step with rough stone & 2 nd step with fine stone and pointing of joints to match the colour of kota including treating the surface with bees wax polish complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 15mm complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 20mm complete all as specified and as directed.

Taking up or down steel tubing and connection, removing clear off site after credit for the same is recovered by the dept., bore of pipe 25mm complete all as specified and as directed.

Cutting holes into or through brick/ stone walls built in cement mortar of superficial area n exc 150 Sq.cm and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed

Cutting and grooving of wall for fixing of CPVC pipe lines and after fixing of CPVC pipe line and making good of all cutting surfaces etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 20 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F Tubes, ‘medium grade’ galvanised, 25 mm bore with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F CPVC pipes, SDR 11, 20 mm outer dia of pressure rating 6kgf/sqcm conforming to IS-15778 with all fittings such as Tee, bends, elbows ,unions ,sockets and end pieces etc to receive fittings and fixed with solvents fixed to walls / ceiling with all clamps in Shafts/ducts with all necessary scaffolding to fix the pipes and testing the joints under prescribed pressure etc complete all as specified and as directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 20 mm bore complete all as specified and as directed.

S&F in repair for gun metal globe or gate valves with iron wheel head , screwed both ends for iron pipe & fixed of size 25 mm bore complete all as specified and as directed.

S&F in repairs Bib taps, fancy type, chromium plated with crutch sc-rewed down, screwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs Pillar taps, fancy type, chromium plated, screwed down, high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs Stop valves/ Angle cock,, cast copper alloy, fancy type chromium plated, screwed down, high pre-ssure, with crutch , screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix in repairs of stop valves / angle cock cast copper alloy, fancy type chromium plated screwed down with long shank and cup (concealed) type, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed to 15 mm bore pipe complete all as specified and as directed

S&F in repairs low density polyethene pipes (LDPE) 50mm of pressure rating 6 Kg/cm2 fixedcomplete to walls, ceiling or laid in floors etc, complete all as specified and as directed.

Supply and fix in repairs vitreous China wash basin under counter, star white of size 490 x 360 mm with 32mm dia brass chromium plated waste coupling and cast iron brackets complete all as specified and as directed. MAKE: CAT No 10051 or HINDWARE or equivalent in PARRYWARE/CERA as approved

S&F in repairs vitreous china wash basin, white, flat back, size 580mm X 450mm including CI brackets, 32mm dia brass chromium plated waste fittings with long screwed shanks and fly nuts flanged end bedded in red lead cement and other end fixed with & including cutting for & pinning in end of brackets and 15mm bore pillar tap, cast copper alloy fancy type chromium plated, screwed down high pressure complete all as specified and as directed.

Supply and fix in repairs water closet (pedestal pattern) coloured with combined flush tank (Cascade type) with Lid, seat cover, cistern fittings and all accessories complete all as specified and as directed MAKE: CAT No 92072 of HINDWARE (S-10/P-18) Pastel colour or equivalent in PARRYWARE/CERA as approved

S & F in repairs vitreous China wash down water closet pan (pedestal pattern), white or tinted complete including plastic water closet seat, white/black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and fixed in repairs vitreous china squatting pan 'Orissa" pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including flushing pipe, anti-syphonage pipe, lime concrete bedding etc complete including making good to floor to match with adjoining surfaces complete all as specified and as directed.

Supply and fixed in repairs 10 litres capacity PVC valve less flushing cistern of low level duly ISI marked body, ISI marked syphon, white colour, with inlet, ball valve, float and handle and a pair of cast iron brackets 32mm dia PVC flush pipe (low level bend) complete all as specified and as directed.

S&F in repair PVC connections, 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

S & F in repairs 15 mm bore brass chromium plated shower rose 125 mm size, with swivel joints and stainless steel arm complete all as specified and as directed..

Supply and fixed in repairs soap dish brass complete all as specified and as directed MAKE: CAT No F880011 of HINDWARE or equivalent model in PARRYWARE/CERA as approved by GE

Supply and fixed in repairs toilet paper holder with flap, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed. MAKE: CAT No F880003 of HINDWARE or equivalent model in PARRYWARE/CERA as approved by GE

Supply and fixed in repairs tubular towel rail 20 mm dia, D type brass chromium plated 60 centimetre long between flanges, complete all as specified and as directed.

Supply and fixed in repairs PVC (SWR) floor trap of 75mm dia, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors including taking down old pipe complete all as specified and as directed

Supply and fixed in repairs PTMT bath room mirror cabinet of size 330x430mm complete all as specified and as directed MAKE: CAT No 551 of PRAYAG or equivalent model in POLYTUF as approved by GE

Supply and fix in repairs of brass chromium plated, hand shower health faucet with health facet tube of 1.2 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed. Make: CAT No F160038 of HINDWARE or equivalent in PARRY WARE/CERA as approved

Supply and fixed in repairs chromium plated grating with or without hole of dia 125 mm dia complete all as specified and as directed.

Supply and fix in repairs brass chromium plated two way tap screwed for 15mm dia bore iron pipe complete all as specified and as directed MAKE: CAT No F200004FT of HINDWARE or equivalent in PARRY WARE/CERA as approved

Supply and fix stainless steel curtain rod of 25 mm bore fancy type complete all as specified and as directed

Supply and fix in repairs for stainless steel curtain rod brackets (decorative type) suitable for curtain rod of 25 mm dia, complete all as specified and as directed

S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia, complete all as specified and as directed.

S&F in repair bracket aluminium powder coated (fancy type) for 20 mm dia tubular curtain rod(for item above) complete all as specified and as directed

S&F stainles steel sink with drainage board , 1 mm thick sheet of steel grade AISI 304 for kitchen or laboratory, with plug, waste pipe, washers including CI cantilever bracket, connecting union etc., overall size 915 x 460 mm with bowl size 410 mm x 330 mm x 160 mm including supply and fixing bib tap CP with long body screwed for iron pipe complete all as specified and directed. Make : Nirali, Bule star ISI marked.

Supply and fix in repairs stainless steel plate rack of overall size 90cm X120cm X 1mm thick (18 gauge) conforming to the sample kept in the office of the AGE B/R I, with necessary fixing materials complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and as directed

Material and labour for cement concrete chequered designer tiles of 25mm thick of 30x30 centimetre size set , jointed , pointed in neat cement slurry in floors with grey cement complete all as specified and as directed

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) in plinth protection / paths laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection , at 3 metre interval and every change of direction duly filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

M/S B.SHRAVAN KUMAR

M/S C MALLIAH & SONS