Renovation of School Building in PU Primary School at Sankarapuram Village of Uppathur Panchayat

Renovation School Building

Pointing with cement mortar 1:3 to full depth of tiles using waterproofing compound 10% by weight of cement including cost and conveyance of all materials to site and all labour charges etc complete

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2 cm in CM 1:3 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete

White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed.

Distempering the old wall and ceiling two coats with best oil bound distember of approved quality including preparation of surface, the rate includes cost of brushes, high scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats over Old iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Providing Blockboard in two layers with first layer in cement mortar 1:5 (one cement and five crushed stone sand)20mm thick and the second layer in Combination mortar 1:1:6(one cement one lime and six crushed stone sand) 20mm thick and providing band all round the block board in c.m 1:5 (one cement and five crushed stone sand) for 20mm thick and 50mm width including cost of one coat of block oxide paint of approved quality complying with standard specification.

Brick work using using Country Bricks of size 8-3/4" x 4-1/4" X2-3/4" in Cement Mortar 1:3 (One cement and three sand) including curing neat finishing, etc., complete complying with standard specification. Above base

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing following thickness of cuddapah slab for cupboard 20-30mm thick

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Supply & Fixing of 35mm thk. single leaf high density interior grade marine plywood shutters pasted both sides 1.5mm thk. laminate approved design with 35x12mm T.W.lipping on all edges with necessary adhesives and CP screws complying with standard specification. The cost is inclusive of 1 no cylindrical Lock, handle ,tower bolt ,approved equivalent make SS ball bearing hinges of equivalent make of approved make,2 no floor mounted SS door stoper ect. complete as per drawing. Make: Kutty, Sharon, Trojan. Accesseories Make: Dorma, Godrej.1.5mm thk Laminate Basic Cost:810/M2 .