Installation of Four High Mast Lights at Qazigund Bus Adda

Supply and erection of Mild Steel Swaged Tubular Pole confirming to IS: 2713-1980 ( Part I-II) with base plate. The pole shall be made from steel tube and pipe (IS : 1141, Fe 410)including excavation of the pit and filling up the same with cement concrete of M15 Grade (1: 2: 4 mix)from base plate to 50 cm above ground level, earthing terminal, cable entry with 32mm dia B- class GI cable sleeves. The pole shall be painted with 2 coats of red oxide primer and 2 coats of enamel paint of silver. The job also includes the cost of form work and carriage of all required materials. (9 mtr. 410 SP-28).

Providing and fixing of detachable type round or square bracket (suitable for 4 lights) of 32/35 mm dia. GI pipe as per requirement.

Providing & Fixing of IKO8 IP-66 120W protected high power LED flood light system with single piece Pressure diecast aluminum housing, toughened glass diffuser with suitable lenses on LED to achieve various beam angles, of high power LED of 3 to S watt each. Integrated potted driver as a unique BIS R number having more than 85 % and in compliance to BIS certified and Trade mark certificate. [he System level Luminary efficacy >=1 wt. LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff V AC an uto resetting Safety Power Factor >0.95, THD(I) <10%, driver current) <=750mA. driver should be Phase to phase protection of 440 V for 4 Hrs Electrical Connector, Surge Protection Min >24KV internal and 10KV external but inside driver compartment, System life of 50000 Burning hours with 70% of Initial Lumens maintained, CRI>70 and CCT 5700k $355K. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/ authenticity. Fixture shall be IS 10322 Complianced.OEM Must have its own in house NABI lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from.OEM shall be submitted.

S/L, testing and commissioning of, 16 sq. mm 2 core XLPE Insulated, PVC aluminum armored cable 650 V/1100 V Grade as per IS 7098 (Part 1) 1988 with upto Date Amendments. Havells or Eq. standard make as directed by engineer Incharge and making end termination with brass compression gland and aluminum lugs of reqd size.

Supplying and laying of DWC HDPE (Double Wall Corrugated High Density Polyethylene) pipe, 50 mm dia. ISI marked along with all accessories like sockets, bends, couplers, etc. with fitting and cutting, jointing, etc. (under ground), including excavation and refilling the trench after laying the pipes.(complete job)

Supply, installation, testing and commissioning of floor mounted compartmentalized , out door type main distribution panels (each with 4 angle iron leg), fabricated out of 16 gauge sheet steel,water proof, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 100A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. Space for 08 way MCBs The panel should have a compartmental space for housing a 4 KVA voltage stabilizer. The job also includes the cost of providing and laying of cement concrete block of M15 grade. (2`-0” x 3`-0” x 1`-6”) The job also includes the cost of form work and carriages of all required materials.

Supplying and drawing FRLS PVC insulated copper conductor single core cable through pole up to light.

3 x 2.5 sq. mm (P + N+Loop Earth)

Providing and fixing/ laying of earthing station by way of placing GI electrode rod/ pipe in a pit , connected through GI strip. (complete job)

Providing and fixing of IP 65 proct impact resistant polycarbonate enclosure box with knock out for cable entry /out including fixing with nut bolt fastner etc required complete in all respect of following size along with 63 A connector and 3 no. 6A MCB for controlling the High Mast Lights. 250 x 200 x 115 mm

Supply, installation , testing and commissioning of 4 KVA relay type voltage stabilizer operating from input voltage 90-260Volt thereby producing output voltage of 230volts +_ 3%.

Providing of chemical earthing as per IS standards by way of digging 8 feet pit then embedding 3 mtr. Long GI earthing electrode, 80 mm dia. Connecting the plate with main control board by 10 SWG Copper wire with 1/2” dia. Full thread brass nut and bolts and washers, refilling the pit with chemical compound.