SPL REPAIR TO BLDG NO T 06 T 13 T 163 AND BARBED WIRE FENCE FROM SEVOKE DWAR TO 659AA AND FENCING IN MAP AREA AND PROVN OF CERTAIN REVENUE WORK AT SEVOKE MIL STN UNDER GE SEVOKE ROAD

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as secified.

Taking down old fencing barbed wire complete all as specified and directed.

Excavation in post hole each n.exc. 0.5 cum and getting out in soft/loose soil incl returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L cement concrete 1:3:6 type C2(using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified and directed.

S&F mild steel angles or tee sections, fixed independently , without connecting plates etc as in splited end fencing post Fe 410-W (Gde-E-250) quality A including drilling holes Complete all as specified and directed.

M&L for preparetion of new steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over priming coat of red oxide primer complete all as specified and as directed.

S&F galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or typing at crossing with and provision of galvanished MS wire, staples or steel pins etc (Each line wire to be measured separately.) complete all as specified and directed.

All as per item No. 07 above but except materials

Surface dressing n.exc 15cm deep in soft/loose soil including removing of bushes complete all as directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 Mtr deep in soft/loose soil getting out and levelling of bottom surface to required level for poles/stay assembly/ cable, sentry post etc all as specified and as directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick all as specified and directed.

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point all as directed.

M&L cement concrete 1:2:4 type B2 (using 20mm graded stone agg) as in foundation for fixing tubular poles/trusses in columns, pillars etc complete all as specified.

M&L plain cement concrete 1:4:8 type D 2(using 40mm graded stone agg) as in foundation filling and mass concrete complete all as specified.

M&L for hard core of broken boulder or stone of gauge n. exc 63 mm deposited , spread and leveled in layers n.exc 15 cm thick watered and rammed to true surfaces complete all as specified and as directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring all as specified and directed.

Sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L for PCC 40mm thick 1:2:4 type B-1 (20 mm graded stone aggregate) to recived topping layer complete all as specified and directed.

M&L for Glass dividing strip 3mm thick of width 38mm and inserted conform to design complete all as specified and directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including form, moulds mitred/ stopped end etc complete all as specified.

S&F steel work in tubular trusses/ posts including special shaped washer etc. complete using ERW or induction buttwelded tubes confirming to IS 1161 1979 grade St-240 including all allied items like MS base, sole and gusset plates incl welding all as specified and directed by Engr-in-Charge.

S&F Mild steel bolts, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut Exc 30 cm long etc complete all as specified and directed.

S&F pre- painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified and directed.

S&F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified

M&L for non skid coloured ceramic tiles of 7 to 8mm thick (Squre/ rectangular) area exc 0.18sqm but not exc 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of tiles including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and as directed.

M&L PVC (SWR) 110mm dia eaves gutters, half round with rounded edged sheet eaves fixed in tubular trusses / poles with tapping screws as specified and directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access door complete all as specified & directed.

S & F 110 mm bore PVC (SWR) junction (Single T) equal or unequal provided with access door complete all as specified & directed.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for Preparation of newly plastered wall surfaces and applying three coats of white washing all as specified and directed.

M&L for Preparation of newly plastered wall surface and applying two coats of colour wash on walls complete all as secified.

S&F mild steel Framed work Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as diretced.

S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.

S&F Mild steel, plain, black of 1.25 mm thickness sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete as specified.

S&F of 20cm long mild steel barrel towel bolt stove enameled black with bright bolt (dia of bolt shall be 10-12mm) complete all as secified.

S&F of 300mm long mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate and fixed complete all as secified..

S&F of 150mm size mild steel pressed handles oval type stove enameled black.

S&F Mild Steel 100mm long butt hinges, medium weight cold rolled mild steel complete all as specified.

M&L for PCC (1:3:6)type C2 using 20mm graded stone aggregateas in hold fast blocks etc complete all as specified and directed.

M&L for Mild steel bars 6mm to 8 mmdia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe 290-0 Gde E -165 complete all as specified and directed.

M&L for RCC (1:2:4)type B1 using 20mm graded stone aggregate as in, slab etc complete all as specified and directed.

M&L Formwork for Beams/Lintal, slab, flat rough finished surface of concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6 type C2) using 40mm graded stone aggregate in plinth protection ,foot path and hand standing finished concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1flooring 40 mm thick (20 mm graded aggregate ) finished even and smooth using extra cement complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and as directed.

M&L for non skid ceramic tiles of size (300mm x 300mm ) X 6- 7mm thickness in floor set and jointed in neat cement slurry and pointed in coloured cement to match with the tiles complete all as specified and as directed

S&F IInd class plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed complete all as specified and directed.

S&F of 35mm thick 2nd class hard wood plain, framed paneled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered practicle board with commercial face veneers and fitted to chowkats complete all as specified and directed.

S & F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified.

S&F Factory Made Solid Panel PVC Door Shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet shall be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per specification & drawing for SI No.8080 on ser page No.156 in SSR-2010 (Pt-II), complete all as specified and directed.

M&L preparing new wooden surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F of 3mm thick sheet glass ordinary quality and glazing with oil putty in square n'exc 0.50 Sqm in each pans complete all as specified and as directed.

S&F mild steel for window guard bars/Flat Iron let in and fixed independently in wooden frames support for shelves etc and similar articles confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S&F wash hand basin, vitreous china white of size 550x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, 32mm waste fitting brass chromium plated and waste pipe of 32 mm bore complete all as specified and directed.

S&F Vitreous China urinals, bowl type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

S&F 15mm angle or Stop valve, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, fancy type, chromium plate, with long shank and cup (concealed type), complete all as specified and directed.

S&F 15mm bore bib taps, fancy type, chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm size PVC connection with PTMT nuts 450mm length, complete all as specified and directed.

S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.

S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with M.S wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter square, rectangular etc complete as specified and and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectangular etc complete all as specified and as directed.

M&L for mild steel TMT bars 6mm to 8mm dia as in stirrups etc bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Columns, pillars, piers, posts and strutscomplete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).

M&L for Reinforced cement concrete (nominal mix) Type B1 1:2:4 (20 mm graded stone aggregate) in Foundations,footings, foundation beams; bases for columns, etc.; and mass concretecomplete all as specified and directed. (Note: Reinforcement and form work shall be measured and paid separately).

M&L Mild steel, plain, black sheet 0.80 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of primer on wall over 1-2 mm thick external wall care putty etc complete all as specified and directed.

Demolition of reed, lathering, single or double, including battens and plaster or chicken wire lathering complete all as specified..

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified..

M&Lfor brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls built in 1:4 complete all as specified.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thick (below or above ground level) unreinforced complete all as specified and directed

M&L for PCC 1:3:6 type D-2 (using 40mm graded mechanically crushed stone aggregate) as sub base of flooring 75mm thick all as specified.

M&L chequred cement concrete tiles 30cmx30cmx25mm thick set jointed and pointed in neat cement slurry in floors set with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as spd and directed.

Roughening surfaces of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified.

M&L for machine cut kota stone slab 18-20 mm thick (of size not less than 55cm X 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing over and including cement screed bed 20 mm thick in cement mortar (1:6) complete all as specified.

M&L for machine cut kota stone slab 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting,washing,rubbing and polishing but as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surface,complete all as specified.

M&L for Makrana white Marble work 18 to20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness in roofs complete all as specified.

Dismantling timber scantling 40sqcm and over in section unframed work in any position.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE -290 Gde E-165 complete all as specified and directed.

Dismantling ceiling board any thickness including cover fillet.

S&F Hangers 2.25 mm dia GI ( upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified.

S&F Anodised aluminium snapgrid framework(size of grid 605x605 mm) for false ceilng all as specified and directed by engr in charge.

S&F 4 mm thick non asbestos decorative type fibre cement building boards fixed or laid / insertedto timber/ GI/Aluminium framework with screws as in ceiling and fixed in jointless finish with jointing compound and jointing tape as per manufecturer instructrions complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description all as spd.

M&L for 20 mm thick rendering in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only incl. finishing the surface even and fair(WPC shall be measured and paid seperately)

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer and one coat of wall putty all as specified and directed. .

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of primer on wall etc complete all as specified and directed.

M&L complete removal of existing treatment from the walls and applying two coats of distemper oil-emulsion over one coat of priming paint of any tint over 1 mm thick wall putty on walls including preparation of surfaces all as specified and directed.

M&L complete removal of existing treatment and applying two coat of cement base paint over one coat of primer on wall etc complete.

M&L for preparing old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke spot ,moulds ,moss and efflorescent salt and trading oil and gressy spots and applying one coat of white wash on walls.

Taking down chowkats or frames with shutter ( without taking off shutter from the frames ), area n. exc. 1.5 Sqm each and removal from site including cutting of holes for removal of hold fasts and making good using new bracks or in cement concrete 1:2:4 type B0 complete all as specified.

All as per item No 100 here in before but area exc. 1.5 Sqm and n. exc. 4.00 Sqm each complete all as spd.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock, strick plate, including PCC etc complete as specified, Size of frame 125 x 60 mm including providing one shop coat of zinc chrome primer.

S&F 35 mm thick Flush shutters, solid core construction, with particle board core and both face is covered with decorative face veneer with lipping/frame to match complete all as specified.

Supply and fixing IInd class hard wood factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

M&L for painting to new wooden surfaces of any description not otherwise described over 10cm width or girth, and applying two coats of synthetic enamel paint over one coat of pink primer including preparation of surfaces complete all as specified.

S&F extruded aluminium alloy handles, fabricated type., anodised,200 mm complete all as secified.

S & F 300mm ordinary rat tail rod pattern springs of mild steel including roller and roller plate for skeletton door shutters.

S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay compleete with glazing bars, dovetailed or welded complete all as specified.

All as per above item 108 hereinbefore but without glazing bars for gauzed shutter complete all as specified and directed.

S & F steel ventilators with top hung shutter including hinges,steel peg stay, complete all as specified including providing one shop coat of zinc chrome primer.

S&F mild steel flat iron fillets ( for securing wire mesh etc) , wind ties etc including all necessary drilling bolting or riveting, etc, and similar work confirming to Fe-290 Gde E-165.

S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeing 0.50 sqm in each pane complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

M&L for Demolition of RCC roofs , floors( other than ground floor) beams, cover slab complete all as specified and directed.

M/L for RCC 1:2:4 type BI (using 20 mm graded stone aggregate) nominal mix as in fins, facias,chajja,lintel etc complete all as specified and as directed.

M&L for pre cast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in cover slabs and set in cement mortar 1:4 including necessary form work complete all as specified.

M&L Formwork for Beams/Lintal, slab, flat rough finished surface of concrete complete all as specified and directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges for flat complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

M&L for 10mm thick rendering in cement mortar 1:3 on other than fair face of brick work for laying tiles in vertical surfaces complete all as specified and as directed.

S&F in repairs CP brass towel rail 60cm long including fitting complete all as specified and directed.

S&F in repair vitreous china pedestal stand white colour complete all as specified.

Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.

S&F PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed.

S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms)

S & F PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber rings joints fixed to walls or floor of 75mm bore incl taking down old unserviceable pipe complete all as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm dia plain with grating including jointed with solvent cement of complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction (Single T) equal or un equal provided with access door complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-use or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-use or removal to store complete all as specified.

S&F for 15 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F for 20 mm bore medium grade galvanized steel water tubing with all fittings and fixed to wall/ceiling or laid in floor complete all as specified as in short lengths complete all as specified.

S&F in repair stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with coupling ,plug washers waste pipe, cast iron cantilever brackests and connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified.

Dismantling PVC water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr

S&F Rotational moulded polyethylene water storage tanks 1000 Litre capacity double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I.

Demolition and breaking up drain pipes 150 mm (Salt glazed stone ware, AC or reinforced concrete) set in cement mortar and removing from site of work to a distance n.exc 100 mtr complete all as specified and directed.

M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggragate) as in bed for drainpipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed.

M&L for salt glazed stone ware drain pipes 150 mm bore grade 'A' laid in trenches and jointed in cement mortar 1:1 and tested complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in benching and coping of manhole complete all as specified.

Dismantling plain asbests cement (corrugated , semi corrugated , etc ) sheets in roof coverings complete all as specified.

M&L forProviding reinforced cement concrete type B-1, 1:2:4 (20 mm graded stone aggregate) In precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops all as specified and directed.

M&L for Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and n.exc 250 Sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops all as specified and directed.

Taking down carefully old unserviceable copper/aluminium point wiring (light,Exchaust fan, socket or power) complete incl fittings such as switches,ceiling roses, pendents, regulators,bells,sockets,tube light fittings etc, and making good disturbed surface of walls & floors etc complete all as specified and as directed.

M&L for concealed point wiring with two single core PVC insulated, unsheathed, multistranded copper conductor FRLS of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.50 sqmm green in colour as earth lead in and including PVC rigid conduit (medium grade) with all fittings & accessories including provn of MS sunk terminal box of appropriate size suitable for switch fixed flush to wall for mounting switch, sockets, fan regulators etc with 3mm thick hylum sheet top cover with screws & cup washers for one light / fan point / call bell complete. NOTE : Cost of making good the disturbed surfaces (if any) matching with the existing surface is deemed to be included in the unit quoted rates.

All as per Item Sl No - 146 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A switch-socket point on independent board complete.

All as per Item Sl No - 146 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 2.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 2.5 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No - 146 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 4.00 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 4.00 sqmm green in colour as earth lead for 15/16 A switch-socket point on independent board complete.

All as per Item Sl No - 146 here in before but with two single core PVC insulated, unsheathed, multistranded copper conductor of size 1.5 sqmm and one single core PVC insulated unsheathed stranded copper conductor of size 1.5 sqmm green in colour as earth lead for 5/6 A socket point on same board complete.

M & L for Switch Socket combination 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Socket outlet 3 Pin, 5 Amp flush type universal, 240 volts, complete as directed.

M & L for Switch Socket Combination 5 in 1, 3 pin, 5 and 15 Amp flush type universal, 240 volts, complete as directed.

S&F piano switch single pole 5 Amp 230 Volt all as specified and as directed.

S&F ceiling rose ,surface bakelite 65mm x 50mm size with three terminals all specified and as directed.

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 20 watt 4 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC

Taking down existing u/s FTL light fitting and S&F in repair decorative box type fitting with LED light fitting 9 watt 2 feet with Al extruded batten luminaire for 230 volt AC all as directed by EIC

M&L LED building security light of capacity 40 watt in Aluminium PDC housing, toughened glass cover with IP66 protection complete with all fixing arrangement and connection of PVC copper wire not exc 5 mtr

Taking down ceiling of any size, sealing cable end,dismantling blades and removing fan and blades to store for refixing or depositing to MES store as directed.

S&F in repair electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 sweep/1400 mm, 120 Watt complete.

S&F in repair exhaust fan AC, single phase, 230/240 V, of size 300 mm seeep heavy duty steel/aluminium metal body incl making holes on wall & making good the distrubed surfaces with all connecting arrangements complete.

S&F in repair energy efficient, 5 star rated ceiling fan 230V 1200 mm sweep with all accessories and connecting up with the ceiling rose with required flexible wire of suitable size with ceiling fan complete all as specified and as directed.

Supply & Fixing DB with sheet metal enclouser 240 volts, 12 way rated bus bar single pole & neutral metal double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete incl taking down existing all as specified and as directed.

S&F MCB, DB, TPN, 4 ways DOUBLE DOOR, IP-42, IK-09 with metal door, 160A rated bus bars, earth bar, neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed including dismantling taking down unsv one with MCBs complete.

Supply & Fixing DB with sheet metal enclouser 240 volts, 8 way with rated bus bar single pole & neutral double door for MCB, incl cutting chases for DB of reqd size and making good distrubed surface area complete all as specified and as directed.

S&F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI Marked complete.

S&F MCB, DP, 10KA, 415V, "C" curve, 06-32 A, ISI Marked complete.

S&F MCB, SP, 10KA, 230V, "C" curve, 06-32 A, ISI Marked complete.

Material and labour for concealed sub main wiring surface type with two nos single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm and one no single core PVC insulated unsheathed multi strand copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including surface rigid non-metallic ISI marked PVC conduit medium grade with all fittings and fixings accessories incl taking down existing u/s complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position ) earth pit not less than 2.25 mtrs below normal ground level with the top edgeof the earth plate not less than 1.5 mtr (B.G.L.) & connected to galvanised iron wire 4 mm dia by means of bolts,nuts,checknuts & washer of galvanised iron including PCC (1:2:4) type B1 precast RCC cover slab with suitable handle made of 6 mm round bar, including necessary excavation & earth work in any type of soil , 20 mm dia med grade galavinised steel tube for watering with one end fixed with cast iron funnel & wire mesh, 15 mm bore light grade galvanised steel tubing up to 7.5 mtr length for drawing earth lead proctection & common salt , charcoal in alternate layers etc. complete all as shown in EP no 3 of SSR Part 1 & testing on complection incl taking down old unsv earthing complete.

Supply and lay in trenches/wall LT UG XLPE insulated ,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 16sq mm 4 core including making necessery arrangements for end connections all as specified and as directed.

Supply and fix GI pipe 40mm light grade for cable protection complete all as specified and as directed.

Supply & laying in trenches clear sand for cushioning under cable 8 cm below and 15 cm above complete in level all as specified and directed by Engr-in-Charge. Note:- Punned thickness shall be measured.

Supply and laying burnt clay sub class B brick as cable protection all as specified and directed.

M S ALOK SAHA

MARWA CONSTRUCTION

ASSOCIATED TRADING CORPORATION

JHA CONSTRUCTION AND CO

BIJAN KUMAR DHAR

D.D. BROTHERS