JH-M-HAZ-05-2021-22

Amount

(1) Morangi to Pauta (L - 3.652 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

1000 M Lead

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

White washing two coats on parapet walls all complete job as per specification and direction of E/I.

(2) Jharpo to Garisaram (L - 7.950 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

1000 M Lead

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 5th KM Stone (Precast)

Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Retaining Wall (1.50 M High) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Drain E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Plain/Reinforced cement concrete complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (R.C.C. Grade M-20)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

White washing two coats on parapet walls all complete job as per specification and direction of E/I.

R.C.C. Culvert (1 x 1.0M x 1.0M) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (R.C.C. Grade M-20)

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (P.C.C. Grade M-25 in Deck Slab)

Providing and laying Cement Concrete Wearing Coat M-30 grade including reinforcement complete as per drawing and Technical Specifications.

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Backfilling behind abutment, wing wall and return wall with Sandy Material complete as per drawings & technical specification Clause 1204.3.8

(3) T03 Deoria More to Ghaghra Khurd (L - 3.500 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

1000 M Lead

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Drain E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Plain/Reinforced cement concrete complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (R.C.C. Grade M-20)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

White washing two coats on parapet walls all complete job as per specification and direction of E/I.

Retaining Wall (1.00 M High) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Retaining Wall (1.50 M High) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

(4) Surajpura to Suji (L - 1.800 Km)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

1000 M Lead

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

White washing two coats on parapet walls all complete job as per specification and direction of E/I.

(5) R.E.O. Road to bandarbela (L - 2.300 Km)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

1000 M Lead

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing Direction, Village and School Signboard as per IRC:67 made of f encapsulated lens type reflective sheeting vide Clause 1701.2.3 Fixed over aluminium sheeting, 2mm thick with area not exceeding 0.9sqm supported on mils steel single iron post 75x75x6mm firmly fixed to the ground level as per approved drawing and Technical Specification Clause 1701.

Providing and fixing of retro-reflectorised Cautionary, Mandatory and Informatory Sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

White washing two coats on parapet walls all complete job as per specification and direction of E/I.

(6) Raibar to Horiya (L - 3.000 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Drain E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9 Sand Filling

Providing and laying of dry rubble flooring complete as per drawings and technical specifications Clause 1303.3

Plain/Reinforced cement concrete complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Plastering with cement mortar (1:3), 15mm thick on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications (R.C.C. Grade M-20)

Supplying, fitting and placing HYSD bar reinforcement in super-structure complete as per drawing and technical specifications.

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

(7) Orderna to Jamuari (L - 3.400 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

(8) Katkamsandi to Ulanj (L - 3.400 Km.)

Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 Free Lead

Granular sub-base/base/surface course with local materials (Table 400.13) by mix in place method normal Construction of granular sub-base by providing local material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at once and compacting with smooth wheel roller to achieve the desired density complete as per Clause 401.4 as per Technical Specification Clause 408

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning the road surface and spraying prime @ 0.70 to 1.0 Kg /Sqm using mechanical means as per Technical Specification clause 502

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying semi dense bituminous concrete with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504

Construction of un-reinforced, dowel jointed at expansion and construction joint only plain cement concrete pavement, thickness as per design, over a prepared sub-base with 43 grade cement or any other type as per clause 1501.2.2 M30(Grade) coarse and fine aggregate conforming to IS: 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less than 0.2Cum capacity and appropriate weight batcher using approved mix design laid in approved fixed side formwork ( steel channels, laying anf fixing of 125micron thick polythene film, wedges, steel plates including levelling the form work as per drawing) spreadiing the concrete with shovel, rakes, compacting by needle, svreed and plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints applying debonding strips, primer, admixures as approved, curing concrete slabs for 14 days using curing compound (where specified) and water finishing to line and grade as per drawing and Technical Specification clause 1501

Providing Reinforced cement concrete M15 grade kilometer stone local stone of standard design as per IRC -8 fixing in position including painting and printing etc. as per drawing the Technical Specification clause 1703 Ordinary KM Stone (Precast)

200M Stone (Precast)

F.I. Post (Precast)

Providing and fixing of typical PMGSY Informatory Signboard with logo as per MORD specification ans drawing, Three MS Plates of 1.6mmm thick, top and middle plate duly welded with MS Flat iron 25mm x 5mm size on back of edges. The lower platw will be welded with MS Iron angle iron frameof 25x 25x 5mm as per technicaal specification clause 1701and Annexure 1700.1

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

Retaining Wall (1.00 M High) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Retaining Wall (1.50 M High) E/W in excavation for structure as per drawing and technical specification clause 305.1 including setting out, construction of shoring and brading, removal of stumps and other deleterious material and disposal utp a lead of 50m, dressing of sides and bottom backfilling in trenches with excavated suitable material.

Plain cement concrete in open foundation complete as per drawing and Technical Specifications (P.C.C. Grade M-10 with nominal mix 1:3:6)

Stone masonry work in cement mortar in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in foundation

Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Parapet Construction Stone masonry work in cement mortar in s/s complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203. Random Rubble Stone Masonary in C.M. (1:4) in s/s

Plain/Reinforced cement concrete in coping complete as per drawing and Technical Specifications (P.C.C. Grade M-15)

Pointing with cement mortar (1:3) on brick or stone masonry work as per drawing and technical specification Clauses 613.3 and 1204

Labour Cess @ 1%