Electrical renovation and upgradation of shed in premises of CSIR NEERI Mumbai Zonal lab at Worli Mumbai.

Amount

Dismantling the existing light, fan, bell, clock, independent plug point, wiring, for all types with accessories and refilling the holes with cement mortar and finishing In approved manner.

Dismantling the existing cables or mains of all types & sizes & refilling the holes with cement mortor and finishing in approved manner.

Dismantling the existing switchgears, DB & Busbar of any size complete with/without board or angle iron frame & making the site clear by refilling the holes with cement mortar & finishing in an approved manner.

Wiring for light point/fan point/exhaust fan point/cell call point with 1.5sq.mm. FRLS PVC insulated copper conductor cable in surface/recessed PVC conduit with modular switch, modular plate GI/metal box and earthing with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc. as required (Group A) (FRLS copper cable of anchor/havells/finclex/cona/viral & Modular switches with cover plate of Mylink of Legrand/Anchor - Roma make)

Supplying and fixing 5/6 amp piano flush type switch (Modular switches with cover plate of Mylink of Legrand make) socket on the existing switch box/cover including connections as required.

Supplying and fixing 5/6 amp flush type universal socket (Modular switches with cover plate of Mylink of Legrand /Anchor - Romamake) socket on the existing switch box/cover including connections as required.

Wiring for twin control light point with 1.5 Sq.mm FRLS PVC Insulated copper conductor single core cable in recessed/surface steel conduit, with 2 way 5/6 amps piano type modular switch, modular plates,suitable GI/Metal box phenolic laminated sheet ,GI/metal box and earthing with 1.5sq.mm FRLS PVC insulated copper conductor cable etc as required (FRLS copper cable of anchor/havells/finclex/cona/viral & Modular switches with cover plate of Mylink of Legrand /Anchor - Roma make)

Supplying & fixing call bell (Musical) suitable for single phase, 230V complete as required. (anchor/Havells Make). Sample to be approved before installation.

Providing & Fixing Power Plug with (internal wiring) 2×4 sq.mm PVC insulated copper conductor cable with following accessories on surface type box with earthing attachment as required. (Modular switches with cover plate of Mylink of Legrand /Anchor - Roma make) 1. 1 no. 3 model metal box 2. 1 no.6A flush switch-1 module 1 no. 3. 6A flush type multi socket 4. 1 no. Surface plate for above(3 model)

Providing & Fixing Power Plug with (internal wiring) 2×4 sq.mm PVC insulated copper conductor cable with following accessories on surface type box with earthing attachment as required.(Modular Switches with cover plate of Mylink of Legrand /Anchor - Roma Make) 1. 1 no. 6 model metal box 2. 2 no.6 A flush switch-1 module with indicator 3. 2 no. 6A flush type multi socket 4. 1 no. Surface plate for above(6 model).

Supplying and fixing Modular 32 amps, 240 volts, switch Double pole one 1 way with indicator- 2 module with concealed metal box & cover and 6/16 Amps multi socket with metal box & cover plate, switch & socket to be fix at different places for Geyser/Cooler complete with connections, testing & commissioning etc. as required. .(Modular switches with cover plate of Mylink of Legrand /Anchor - Roma make)

Supply of surface mounted tube light fittings Slimline 20 Watt 4 feet cool day light LED Batten with LED 20 W Rod, PHILIPS/Syska/Wipro make with all accessories etc complete in all respect.

Supply of surface mounted round down light 12 W LED fittings, die cast aluminium surface box with all accessories etc complete in all respect. (with 2 years replacement warranty) (Philips/Osram/crompton/Apple lite)

Installation testing and commissioning of prewired fluorescent fitting / down lighters of all types complete with all accessories and tube directly in recess/ on Celling / Wall or down rod including connections with 1.5 sq. mm PVC insu. Copper conductor single core cable & dismantling of existing fittings as required.

Supplying and erecting Ceilling fan with double ball bearing (28W Super energy efficient of Atomsberg Gorilla make / 32 watt Energia -32 Usha/Havells make 5 star rated fan) and with condenser AC 230 V 50 cycles of 1200 mm sweep complete erected in position with necessory flexible copper leads of required colour & with IR Remote & Modular Step regulator (Mylink / Roma), canopy & in provided hook clamp with necessory rubber bushing, clamp nuts & bolts etc. and marking Sr. no. & date of erection. ( Including dismantling of existing fans).

Supplying & installation of exhaust fan-250mm with inbuilt lovers (Similar to ventil Air DX of Havells make)in the existing opening, including making the good damage connection, testing, commissioning etc. as required. (Usha/Havells/CG/GE)

Supplying and drawing following sizes of PVC insulated copper conductor of FRLS, single core cable in existing surface/recessed steel conduit as required. (Anchor/cona/finolex/Absilon/Polycab)

A] 2×4 sq.mm.

B] 4×4 sq.mm.

C] 1×1.5 sq.mm.

Supplying and fixing 20 mm size of PVC conduit/casing caping along with the accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 25 mm size of PVC conduit/casing caping along with the accessories in surface/recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing 4 ways double door, surface/recess mounting, 220V MCB distribution boards of sheet steel, (Similar to ekinoxe distribution boards of legrand make with acrylic doors), dust protected , duly powder painted, inclusive of 32 A tinned copper busbar, common neutral link, earth bar, din bar for mounting MCB’s with 2 nos. 25 Amp. Double pole 240 V, 30 mA RCCB as required. (Legrands//schnelder/MDS/HAGER/C&S make)

Supplying and fixing 4 ways (4+ 12) double door surface/recess mounting, Vertical 415/500V, TPN MCB distribution boards of sheet steel, (Similar to ekinoxe distribution boards of legrand make with acrylic doors), dust protected, duly powder painted, inclusive of 200Amps tinned copper busbar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB & incomer) as required. (Legrands/siemens /schnelder/MDS /HAGER/C&S make). The MCB DB shall be be in MS sheet steel box of size 750 mm x 750 mm x 350 mm. 14 SWG CRCA sheet powder coated (not less than 2.0mm thick) (smoke grey paint) powder quoted, dust & vermin proof.

Supplying and fixing 63 Amps rating four pole (three phase &Neutral) 415V residual current circuit breaker (RCCB), having a sensitivity current upto 300ma in the existing MCB DB complete with extenstion spacers, connections, testing and commissioning etc. as required.(Legrands Dx3 /Siemens /Schneider /MDS /HAGER /C&S make)

Supplying and fixing 5 amps to 32 amps rating 240 V C series miniature circuit breaker for inductive load of single pole in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Legrands-Dx3/siemens/MDS/HAGER/C&S make)

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supply & installation of LED street light fitting with 3 way fabricated bracket of dia 50 mm pipe length more than 2 meter each way & 1 no. 70 Watt & 2 nos 50 W LED luminaires confirming to IP65 (Phillips/ Bajaj / Crompton /Apple lite/Accolite make) complete with accessories. (with 2 years replacement warranty)

Supply of PVC insulate & PVC sheathed Aluminium conductor armoured cable 1100v grade with ISI mark of 4 core 50 sq.mm. (Gloster /Tropodour / CCI / Finolex/Polycab Make)

Supply of PVC insulate & PVC sheathed Aluminium conductor armoured cable 1100v grade with ISI mark of 4 core 25 sq.mm. (Gloster /Tropodour / CCI / Finolex/Polycab Make)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 and upto 95 sqmm. size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sqmm. size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of above 35 and upto 95 sqmm. Size on wall surface (clamped with 25 x 3 mm clamP) /open duct/RCC pipe with clampings as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of upto 35 sqmm. size on wall surface/open duct/RCC pipe with clampings as required.

Providing, laying and fixing 250 mm dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 mm deep) and refilling etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 50 sq. mm (35 mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 X 25 sq. mm (35 mm) of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

Supplying and drawing of UTP 4 pair RJ - 45 CAT 6 LAN cable (1 run of cable) in the existing surface/recessed Steel/PVC conduit as required.

Providing & Fixing RJ 45 socket cat 6 with shutter 1 modulet with modular box & cover plate complete with accessories. (Similar to mylink of legrands make/ anchor-roma)

Supplying and drawing 4 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing Modular Telephone Socket outlet , piano type switch/socket on the existing Switch box/cover including connections etc. as required.

Providing and fixing of lighting conductor finial, made of 25mm dia 300mm long, G.I. tube ,having single prong at top, with 85mm dia 6mm thick GI base plat3e including holes etc. complete as required.

Providing and fixing G.I. tape 20mm × 3mm thick on parapet or surface of wall for lighting conductor complete as required. (For horizontal run )

Providing and fixing G.I. tape 20mm × 3mm thick on parapet or surface of wall for lighting conductor complete as required. (For vertical run )

Earthing with G.I. earth plate 600×600×6mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal or coke and salt complete as required

Providing & laying 25mm×5 mm GI strip on surface or in recess for connections as required.

Sonhira Electric Company