Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC OPPOSITE RADIO STATION TOWER TILAK NAGAR SAGAR ROAD BIKANER 334001 RAJASTHAN | BIKANER | RAJASTHAN | 334001 | L1 | Accepted-AOC Due to lowest bidder | |
| 2 | L2₹36.2 L+₹1.3 L (3.72%)Rejected-Finance N A | NA | NA | 121004 | L2 | Rejected-Finance Due to not lowest bidder. | |
| 3 | L3₹36.4 L+₹1.5 L (4.22%)Rejected-Finance B 22 152 STREET NO 1 14 BABA FARID NAGAR BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Due to not lowest bidder. | |
| 4 | L4₹37.3 L+₹2.4 L (6.78%)Rejected-Finance H NO 327 KRISHNA ENCLAVE HIMMATGARH PO DHAKOLI ZIRAKPUR 140603 | S A S NAGAR | PUNJAB | 140603 | L4 | Rejected-Finance Due to not lowest bidder. | |
| 5 | L5₹38.9 L+₹4.0 L (11.5%)Rejected-Finance | L5 | Rejected-Finance Due to not lowest bidder. |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (N) BIKANER
GE (N) BIKANER MIL STN BIKANER
CERTAIN REPAIR B/R WORK AT MD ACCN BHAGAT COLONY, HANUT COLONY AND KHETARPAL UNDER AGE B/R-I UNDER GE (N) BIKANER.
2023_MES_599338_1
GE (N) BKN-TOKEN/31/2023-24
Open Tender
Civil Works
Item Rate
365 days
GE (N) BIKANER
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE North Bikaner
₹90,000
Yes
12 Jan 2024
30 May 2023
4 Jul 2023
30 May 2023
27 Jun 2023
13 Jun 2023
Amount
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-Charge.
Taking down shutters of any description and refixing in the same opening after rescuring easing and adjustment, area exceeding 1.00 sqm and n.exc 2.00 sqm each complete all as specified and as directed by Engineer-in-charge
Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stone or concrete or bricks surrounds glazesd with putty complete all as specified and as directed by Engineer-in-Charge.
Dismantaling of cast iron / AC /pvc pipe of size 75/100 mm med bore of size as specified as directed by engr-in -charge
Taking down or up, 15 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge.
Taking down or up, 20 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge.
Taking down or up, 25 mm bore galvanised steel tubing and connections including cleaning for refixing or removal complete all as specified and as directed by Engineer-in-Charge.
Dismantling Rotational Moulded plyethyelene water strogr tank of capacity exc 250 lit but not exc 500 litre complete all as specified and as directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-Charge.
Dismantling wooden scantling in unframed work 40 sqcm and over in section in any radius complete all as specified and as directed by Engineer-in-Charge.
Taking down cement or cement lime plaster/ terrazo finish grit finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Demolition of reinforced cement concrete in roof floor (other than ground floors) beams staircase, landing chajja and similar work complete all as specified.
Demolition of cement concrete (un-reinforced) in any position n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge.
Dismantling existing / flooring hearth or wall tiling including cemint mortar bedding (but not backing removing serviceable tiles to store and rubbish off te premises in bath WC and kitchen etc complete all as specified and as directed by Engineer-in-Charge.
Dismantling boarding any description fixed in any position with nails complete all as specified and as directed by Engineer-in-Charge.
Taking down old rusted and demaged steel window/vent incl. guard bar and grill where exist of size not excl 1.5 sqm each and all as specified
Demolition of brick/stone masonry built in CM. complete all as specified and as directed by Engineer-in-Charge.
M&L for brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius brick walls built in CM 1:6.complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on cement concrete surfaces as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge . (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height )
M&L for Rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height )
M&L for Rendering 15mm thick on fair faces of brick in cement mortar 1:4 finished even & smooth without using extra cement with using liquid water proofing compound as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height ) (Note :- Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this schedule)
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height )
Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge.
M&L for Reinforced cement concrete 1:2:4 type B-1 ( using 20 mm graded cdrushed stone aggregate) as in chajjas and the like, all as specified and directed by Engr-in-Charge.
M&L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified.
Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick surface horizontal or sloping, fair finished surface of concrete, all as specified .
Form work to edges of concrete flats, breaks ,conc railing nexc 200mm wide finished rough thick complete all as specified and as directed by Engineer-in-Charge.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate including finishing the surface of concrete topping even & fair without using extra cement complete all as specified and as directed by Engineer-in -Charge.
M & L PCC 75 mm thick 1:3:6 type C-0 (12.50 mm graded aggregate) in any position in ground floor/roof finishing cement concrete surface without using extra cement complete all as specified and as directed by engr-in-charge.
M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.
M&L for Non skid coloured ceramic tiles area exc 0.11 sqm but not exc 0.18 sqm 7 to 8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.
M/L for Non Skid coloured ceramic tiles (size of each tile exc 0.06sqm and n exc 0.11 sqm) 7mm thick laid and jointed with neat cement and pointed with coloured cement to match in floor tile over including 15 mm thick screed bed in cement and sand mortar 1:6, complete all as specified and as directed by Engineer-in-Charge. Colour approved by the Engr in Charge.
M&L for Glazed ceramic tiles (coloured) of size 450mm x 300mm x 6 to 7 mm thick on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of tiles over and including 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive wall, tiles complete all as specified and as directed by Engineer-in-Charge.
M&L Chequered cement concrete tiles 25 cm x 25 cmx25mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified
M&L for vitrified tiles not exceeding 0.36 Sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified
M&L for vitrified tiles not exceeding 0.36 Sqm 10 mm thick in floors set and jointed in neat cement slurry and pointed in neat cement s;urry in floors including 10 mm thick screed bed in cement and sand mortar 1:4 complete all as specified but in vertical surface complete all as specified and as directed by Engineer-in-Charge.
M and L for 20mm thick granite machine cut slab table rubbed and polished granite as on cooking platforms incl. pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble shade laid over 20mm thick cement screed in cement mortar 1:6.complete all as specified and as directed by Engineer-in-Charge.
M&L for 20-25 mm thick single piece machine cut kota stone slab as in flooring in repairs laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L for 18-20 mm thick single piece machine cut kota stone slab on vertical surface , tread , riser etc and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L for 20 mm thick machine cut polished green marble on coocking platform/shelves machine cut, on shelves etc set and jointed in neat cement slurry and pointed in colored cement to match the shade of marble over and including 10 mm thick rendering in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces finishing rough to receive wall, tiles complete all as specified and as directed by Engineer-in-Charge.
Mild steel framed work as in grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, framework of water tank and similar works conforming to Fe-410-0 or Fe-310-0, complete all as specified and as directed by Engineer-in-Charge.
S&F for Factory made Solid PVC door frame of size 50 x 47 mm , made out of 5mm plain coloured PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and making good the disturbed surfaces with plastering in CM 1:6 and the rate quoted is inclusive this element, noting extra shall be paid on this account complete all as specified and as directed by Engineer-in-Charge.
S&F for 30mm thick factory made PVC solid panel PVC door, shutter conforming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 gauge thickness & size 19x19mm for stiles and 15 x15mm for top & bottom rails, MS frame shall have a coat of red oxide primer of approved make and shall 'be covered with 5mm thick heat moulded PVC 'C' channel of size 30x50mm forming styles, and 5mm thick, 75mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2)thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with 30mm wide x 5mm thick PVC sheet beading on either side and jointed together with solvent cement adhesive and an additional 5mm thick PVC strip of 20mm width is to be struck on the interior side of 'C' Channel using PVC solvent adhesive complete as per manufacture’s specifications & drawings, all as directed by Engineer-in-Charge.
S&F100 mm long Butt hinges extruded aluminium alloy, with galvanised mild steel hinge pin, anodised, type B-21, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F steel locking bolts with mils steel electrogalvanised plate and bright bolt ont less than 10 mm dia and 100 mm size, complete all as specified .
S&F Aluminium anodised, barrel tower bolt of extruded section, size 150 mm, complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium handles, cast type, anodised, size 150 mm, complete all as specified and as directed by Engineer-in-Charge.
M&L for 1.25 mm thick pressed steel frames of size 105mm x 60mm for single doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge. Note : - 1. The rate quoted shall be deemed to include for one shop coat of priming with red oxide zinc chromate primer 2. PCC filling in hollow of frame shall be measured and paid for separately under appropriate item of this schedule. 3. Pressed steel frames shall be factory made and shall be procured from one of the manufacturers as per make list’).
M&L for 1.25 mm thick pressed steel frames of size 125mm x 60mm for single doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed by Engineer-in-Charge. Note : - 1. The rate quoted shall be deemed to include for one shop coat of priming with red oxide zinc chromate primer 2. PCC filling in hollow of frame shall be measured and paid for separately under appropriate item of this schedule. 3. Pressed steel frames shall be factory made and shall be procured from one of the manufacturers as per make list).
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in Hold Fast blocks rungs etc including necessary formwork complete all as specifed and as directed by engineer in Charge.
M&L for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling in pressed steel frames complete all as specifed and as directed by engineer in Charge.
M&L for 35 mm thick, IInd class hard wood (Bonsum/Hollock) plain, framed, panelled shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified & as directed by Engineer-in-Charge
M&L for 35 mm thick, IInd class hard wood (Bonsum/Hollock), glazed & skeleton shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.24(a) complete all as specified and as directed by Engineer-in-Charge. Notes for Srl item 54 Nos 55 & here-in-before: - 1.The contractor may use/provide Ist class hard wood “SHISHAM” for manufacturing of shutters in lieu of IInd class hard wood without any extra cost to the govt. 2. The shutters shall be procured from any of the approved manufacturers from the list given in particular specifications Section-II. 3. Glass or wire cloth shall be measured and paid for separately under appropriate items of this sch).
M&L for 30mm thick flush door shutters for door solid core construction with block board core and ply wood face panels with lipping to match complete as per manufacture’s specifications & drawings, all as directed by Engineer-in-Charge.
M&L for 100 mm long, Butt hinges, stainless steel, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F for 150 mm size mild steel, stove enamelled black, pressed handles, oval type, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F for 150 mm long, mild steel, barrel tower bolt, stove enameled black with bright bolt, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F for 200mm long aluminum tower bolt ISI Marked complete all as specified and as directed by Engineer in Charge .
M&L for 250 mm long sliding door bolt, plate type, mild steel, stove enamelled black with bright bolt of not less than 12 mm dia with & including a minimum of six bolts and nuts, four on bolt plate and two on staple plate, ISI marked complete all as specified and as directed by Engineer-in-Charge.
S&F for 250mm extruded aluminum sliding door bolts plate type cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum section alloy and fixed in any position .
S&F 300 mm Long ordinary rat tail rod pattern spring of mild steel including roller and roller plate fixed to welding or screw with chowkhats or frames complete all as specified and as directed by Engineer-in-Charge.
S&F 150 mm Floor door stoper of aluminium alloy and insulation and tounge, anodised with`hard steel spring in floor complete all as specified and as directed by Engineer-in-Charge.
S&F Aluminium snake bead with bush duly fitted with screws with length equal to door width as specified and directed by Engr-in-Charge
S& F of brass magic eye at door entrance as specified by engineer in charge
S&F factory made mild pressed steel Window box type with side huge shutters incl pintol hinges,steel handles, steel peg stay and all locking arrangement and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately iii) Opening incl provn shutter for cooler to be provided
S&F factory made mild pressed steel Ventilator box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) MS fillets, glazing, wire gauge shall be measured and paid separately
S&F stainless steel wire cloth 0.36mm nominal ida of wire and average width of aperature 1.40mm and fixed with stainless steel wire staples
S&F stainless steel wire cloth 0.36mm nominal ida of wire and average width of aperature 1.40mm and fixed in repair with stainless steel wire staples
M&L for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square not execeeding 0.5 sqm in each pane for metal frames complete all as specified.
M&L for Figured glass, pin head type, 4mm thick and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with flap of hinge ( when open 30 mm) complete all as specified and as directed by Engineer in Charge. .
S&F for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished
S&F for Hasp and staple 100 mm aluminium anodised, safety type with mild steel hinges pin including bolt to hinges plates and fixed with screws complete all as specified and as directed by Engr-in-Charge.
S&F for extruded aluminium handles fabricated type 150mm long in old or new position complete all as specified and as directed by Engineer-in-Charge.
S&F friction less hinges to steel windows as in repairs irrespective of any height incl necessary welding .
S&F mild steel handles complete with and including nuts and bolts and washers etc with left or right direction to old steel windows.complete all as specified and as directed by Engineer-in-Charge.
S&F Prelaminated boards 19 mm grading 2 quality interior garde commercial type for cup boards fixed with screw to timber frame work with decorative film mica face veneer on both side face with proper cover fillet of standard hard board 4. 5 mm thick bording plain on side with butt joints with including complete.block complete all as specified and as directed by Engineer-in-Charge.
M&L Second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge.
S&F anodised aluminium frame for doors, windows , ventilators with one or more rebates includirg joining cleat for fixing etc. complete all as specified and as directed.
S&F Sheet glass, ordinary quality 5.5 mm thick for Aluminium door ,window and Vent.and glazing in square n exc 0.5 sq.m in each pane complete all as specified.
S&F Neoprene/ EPDM rubber gasket for fixing sheet glass complete all as specified and as directed by Engineer-in-Charge.
S&F Plain aluminium sheeting thickness 0.56 mm alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from shich the pieces can be cut complete all as specified and as directed by Engineer-in-Charge.
S&F in repair GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and as directed by Engineer-in-Charge.(Prakash Surya, Jindal,Swastik)
S&F in repair GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified and as directed by Engineer-in-Charge.(Prakash Surya, Jindal,Swastik)
S&F in repair GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified and as directed by Engineer-in-Charge.(Prakash Surya, Jindal,Swastik)
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.
Refixing old GI tubing with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified.
S&F in repairs Bib taps brass cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule for 15 mm bore GI pipe,complete all as specified and as directed by Engineer-in-Charge. ( Prayag/ Parryware/Cera)
S&F in replacement Bib tap, cast copper alloy Fancy type, CP, long neck with crutch or butterfly handle, screwed down, suitable for 15mm nominal bore iron pipe screwed for iron or brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F pillar taps , cast copper alloy with capstan head , chromium plated , screwed down , high [ressure with long screwed shank and fly nuts , screwed for 15mm bore dia iron pipe , supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs brass chromium plated shower rose 125mm size with swiven joints fixed in repairs complete all as specified and as directed by Engineer-in-Charge.
S&F shower arm 15mm sixe 195mm long withbend of 45degree with flange of PTMT anycolour (min wt 40gms fixing in repair). complete all as specified and as directed by Engineer-in-Charge.
S&F toilet paper holder brass chromium plated fancy of 45 degree with flange of PTMT any colour (min wt 40gms fixing in repairs. complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC grating 125 mm dia complete all as specified and as directed by Engineer-in-Charge.
S&F angle valves, chromium plated with flange, high pressure,, type screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F in repair two way angle cock with flange cromium plated 15 mm bore fancy type all as by Engineer incharge ( Prayag/ Parryware/Cera)
S&F in repairs Stop valves, cast copper alloy screwed down, high pressure, brass with crutch or butterfly handle, type screwed both ends for iron pipe or for unions, for bore dia of pipe 15 mm, complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F in repairs Stop valves, cast copper alloy, screwed down, high, fancy type chromium Plated , pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions 20 mm bore complete.( Prayag/ Parryware/Cera)
S & F in repair Ball valves 15 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15 mm dia (minimum weight 142 Gms) and fixed complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S & F in repair Ball valves 20 mm bore, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm dia (minimum weight 210 Gms) and fixed complete all as specified and as directed by Engineer-in-Charge (paryag and cera).
S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F Vitreous china wash basin, white, flat back, size 550 mm x 400mm with and including a pair of CI brackets, pillar tap cast copper alloy, with capistan head CP, PVC Connection, PVC waste pipe 32 mm dia with braa coupling etc, supplied and fixed in repairs complete all as specified and as directed by Engineer-in-Charge. ( Prayag/ Parryware/Cera) (Notes : -(i) The wash basins shall be ISI marked, 1st quality and shall be of Make as per Appendix ‘D’ (ii) The rate quoted shall be deemed to include for taking down old WHB complete with all fittings including cutting holes for taking out old brackets and supplying and fixing new WHB with new C.I brackets and also PCC blocks of PCC 1:2:4 type B-1 of size 10cm x 7.5cm x 15 cm for fixing brackets and also including new screws, plugs, cement mortar, red lead cement and other subsidiary materials required for fixing.)
S&F Vitreous China squatting pan “Orissa” pattern, size 580x440mm, white, with integral foot rests (excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti syphonage pipe etc, supplied and fixed in repairs, provision of lime concrete bedding minimum 150 mm thick ( Lime concrete ration 1:2:5) complete all as specified and as directed by Engineer-in-Charge.(Note :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) Unit rate quoted shall also be deemed to include for labour required for fixing of flushing cistern and flush pipe and also for taking down old flushing cistern and flush pipe. Supply only of flushing cistern with flush pipe shall be measured and paid for separately. (iv) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt. )( Prayag/ Parryware/Cera)
S&F Vitreous China wash down water closet pan ( pedestal pattern), white, (excluding flushing cistern and flush pipe) but including CI ‘P’ trap and also including connection to drain (or outgoing pipe) and to flushing pipe, anti- syphonage pipe etc, supplied and fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.(Note: :- (i) WC shall be ISI marked, 1st quality and of makes specified in Appendix ‘D’ (ii) Unit rate quoted shall also be deemed to include for provision of lead joint between CI trap and outlet pipe (iii) The disturbed surface of floor shall be made good as per existing specification without any extra cost to the Govt). ( Prayag/ Parryware/Cera)
S&F Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated hinging device, complete all as specified and as directed by Engineer-in-Charge. ( Prayag/ Parryware/Cera)
S & F in replacement PVC 10 ltrs , valveless, syphonic action type, flushing cistern, white, low level, with inlet, ball valve, float and handle, including 32 mm bore flush pipe brackets complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S & F in (Syphon Internal fitting) of PVC low level cistern as per existing pattern to make the PVC low level cistern fullly functional complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F for Rotational moulded polyethylene water storage tanks of capacity 500 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. (Notes : (i) The water storage tanks shall be 2 layers ISI marked , HDPE tanks moulded to seem-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. (ii) The tanks shall be white coloured with three layered wall and shall be ISI marked. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I. (iii) Payment for inlet, outlet and over flow pipes and ball valve shall be made separately. However cost of providing necessary GI fittings such as nipples with check nuts for inlet and outlet pipes, GI plug with check nut for over flow pipe and 30 cm long wash out pipe, GI 20mm nominal bore, medium grade and check nut for wash out pipes of size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Make list.)
Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete (capacity of tanks exc 250 ltr and n exc 500 ltrs)
S & F in repair 450X300 mm cabinet mirror 5 mm thick of high quality glass ,seamless finish, light weight, high strength complete all as specified and as directed by Engineer-in-Charge.
S&F waste pipe 32 mm for WHB with fixed in repair complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F waste pipe 40 mm for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F Waste pipe 32mm for WHB with coupling fixed in repairs complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F 40 mm kitchen sink coupling for kitchen sink with fixed in repair complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F 75mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm bore cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4 complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm bore sand cast iron waste pipe any length with or without ears laid in floor complete all as specified and as directed by Engineer-in-Charge.
S&F 75mm bore sand cast iron waste pipe any length with or without ears fixed to walls complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm bore sand cast iron waste pipe any length with or without ears laid in floor complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm bore sand cast iron waste pipe any length with or without ears fixed to walls complete all as specified and as directed by Engineer-in-Charge.
S&F 50mm bore sand cast iron waste pipe any length with or without ears fixed to walls complete all as specified and as directed by Engineer-in-Charge.
S&F sand cast iron bend (any radius) 75mm bore dimnishing pieces , T, bend, reducer or tapers (larger bore measured ) fitted with oval acess doors complete all as specified and as directed by Engineer-in-Charge.
S&F sand cast iron bend (any radius) 100mm bore dimnishing pieces or reducers, T , bends, tapers (larger bore measured ) fitted with oval acess doors complete all as specified and as directed by Engineer-in-Charge.
S&F 100mm bore CI sand cast iron branch piece single (Equal or un equal) oridinary or inverted with parallel branches complete all as specified and as directed by Engineer-in-Charge.
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 50mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 75mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to walls for 100mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F cast iron cowl 50 mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F cast iron cowl 75 mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) for waste and vent pipe with or without ears, with cement joints 75 mm dia laid in trenches complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) for waste and vent pipe with or without ears, with cement joints 110mm dia laid in trenches complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 1:2:4, 75mm dia complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) bends (any radius), disminishing pieces or tappers(larger bore measures), 110mm dia with access door complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) bends (any radius), disminishing pieces or tappers(larger bore measures), 75mm dia with access door complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC Pipe Pipe (SWR) branch pieces ,Double (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches 110 mm dia complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC (SWR) Couplers for 75 mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC (SWR) Couplers for 110 mm bore pipe complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC (SWR) reducers for 110 mm bore pipe larger bore measured complete all as specified and as directed by Engineer-in-Charge.
S&F in repair PVC (SWR) 110 mm bore P traps complete all as specified and as directed by Engineer-in-Charge.
S&F in rapair flush pipes to EWC / IWC including all joints complete all as specified and as directed by Engineer-in-Charge.
M&L running welding in repairs with thickness of metal not exc 6 mm including provision for stopper of peg stay steel handle fitting complete all as specified and directed by Engineer-in-Charge.
M&L welding in repairs not exc 2.5 cm in length and not exc 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.
S&F in repair grating 75mm dia of stainless steel having minimum weight 75 gm complete all as specified and directed by Engineer-in-Charge.
S&F in replacement curtain rod 20 mm dia, mild steel, chromium plated, fancy type with fixing brackets and knobs at both ends as per site requirement complete all as specified and as directed by Engineer-in-Charge. Note:- The cost of brackets and knobs is deemed to be included in the quoted rate. Nothing extra shall be paid on this account.
S&F in repair stainless stell tubular towel rail 20 mm dia D type, 600 mm long complete all as specified and as directed by Engineer-in-Charge.
S&F in repair Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed by Engineer-in-Charge.
S&F in repair Spray jet, brass chromium plated, with and including 1.5 metre long PVC flexible reinforced pipe for EWC, for bore dia of pipe 15mm,complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F in repair CP soap dish, fancy type fixed to wall with CP brass screws , complete all as specified and as directed by Engineer-in-Charge.
S&F in repair Brass chromium plated wall mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F in repair Brass chromium plated WHB mixer non telephonic for mixing hot and cold water screwed down for iron pipe 15 mm bore complete all as specified and as directed by Engineer-in-Charge.( Prayag/ Parryware/Cera)
S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.
S & F glass corner of size 300mmx300mm with 5.5 mm thick glass and steelness steel clip and steelness steel railing allround the shelf complete all as specified and directed by engineer in charge .
S&F in replacement GI elbow 15mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI elbow 20mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI Tee 15mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI Tee 20mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI Socket 15mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI Socket 20mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI union 15mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI union 20mm bore fixed to pipe complete all as specified and as directed by Engr-In-Charge
S&F in replacement GI nipple 15mm bore, 50mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 15mm bore, 75mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 15mm bore, 100mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 15mm bore, 150mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 20mm dia ,75mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 20mm bore, 100mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&F in replacement GI nipple 20mm bore, 150mm long fixed to pipe complete all as specified and as directed by Engr-In-Charge (Prakash Surya, Jindal,Swastik)
S&f Brass chromium plated fancy type health faucet with 1 meter flexible tube and hook ( bradeed tube) all as secified as by Engineer incharge ( Prayag/ Parryware/Cera)
S&F stain less steel peg set with 06 no of hooks mounted on SS plate 4 mm thick with and including screws complete all as specified and as directed by Engineer-in-Charge.
Dismantling of Roof tiles of any description or thickness in floor, apron etc laid, bedded and pointed in cement mortar complete all as specified and as directed by Engineer-in-Charge.
Demolition of lime concrete of any description over roof slab complete all as specified and as directed by Engineer-in-Charge..
M&L for 10 mm thick screed bed in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instns( WPC to be measured separately as supply only)
Preparing surface and cleaning of concrete slab by wire brushing and applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 Kg per sq m including cleaning surfaces complete all as specified and as directed by Engineer-in-Charge
S&F APP based polymeric membrance min weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric land on primed surface by force application complete all as specified.
M&L Lime concrete terracing as in roof complete all as specified and as directed by Engineer-in-Charge. NOTE:- For lime concrete, mudia kankar (source : NAL) and Kolayat coarse sand in lieu of brick aggregates and Surkhi respectively as specified in MES schedule Part-I shall be used.
M&L 40 mm thick brick tiles bedded on 10mm thick CM 1:6 and joints grouted flush in cement and sand mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement Steel plate Racks of size 900x 900mm complet all as specified and directed all as specified.
M&L for white/color PVC sheet of best quality to cover the surface & fixed with nails/ screws where requred complete all as specified and as directed by Engineer-in-charge.
S & F in repair sinks made of stainless steel 1.0 mm thick kitchen sink with drainage board, plugs washers and waste copling including bedding in cement mortar to dwarf wall or including supply and fixing cantilever brackets of MS angles and connecting union to 800 mm long PVC waste flexible pipe 40 mm dia, over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified & directed.( Prayag/ Parryware/Cera)
M&L for preparing new or previously untreated surfaces of wood and wood based materials of any description exceeding10 cm in width or girth when un-connected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and including a coat of pink primer complete.
M&L for painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new surfaces (plastered or un-plastered ) of walls including cornices, pilasters etc and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
M&L for preparing new surfaces (plastered or un-plastered ) of walls including cornices, pilasters etc and applying two coats of colour wash, white or tinted over a coat of white wash on wall , complete all as specified and as directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint ,white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge
M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified.
M&L for providing and injecting chemical emulsion for Post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rater of 7.5 ltr per sqm of the vertical surface of the sub structure to a depth of 300 mm including excavated channel along the wall and rodding etc complete . (note the treatment work shall be carried throught authorised agency only , and certificate for the same for warranty shall have to furnished before submitting payment)
M&L for providing and injecting treatment of soil under exixting floors using emulsion @ one liter per litter per hole ,300mm apart including drilling and plugging 12mm dia hles with cement motar 1:2 (1 cement 2 coarse sand ) to matchthe existing floors. (note the treatment work shall be cattied throught authorised agency only and certificate for the same for warranty shall have to furnished before submitting payment)
M&L for providing and injecting of Voide in masonary using chemical emulsion one liter per hole, at 300mm intervals including drilling holes, (note the treatment work shall be carried throught authorised agency only, and certificate for the same for warranty shall have to furnished before submitting payment) and drilling holes at 45 degree and plugging the same with cement motor 1:2 to match with existing surface complete all as specified and as directed by Engineer-in-Charge.
M&L for providing at point of contact of wood work by chemical emulsion ( in oil or kersene based solution) @ .5 liter/hole by drilling 6mm dia hole at a downward angle 45 degree at 150mm c/c and sealing the same for warranty shall have to furnished before submitting payment) complete all as specified and as directed by Engineer-in-Charge.
N.K. CONSTRUCTION COMPANY
HARPREET SINGH CONTRACTOR
G S BUILDERS AND ENGINEERS
M/s Sharafat Farook
ALPHA ENGINEERING COMPANY
M/S ASHRAFI CONSTRUCTION CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .