PROVN OF CERTAIN LBW AND SPECIAL REPAIRS UNDER AGE B/R-II OF GE NORTH MAMUN.

Amount

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

All as per Srl item No.1above but depth exc 1.5m but n exc 3m.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specified.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified.

M&L for PCC 1:5:10 type E2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete (sunken floors etc.) all as spd.

PCC 1:4:8 (nominal mix), type D-2 using 40mm graded crushed stone aggregate as in foundations, filling, mass concrete and sub base of floor, complete all as specified & directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement complete all as specified and directed.

M&L Cement concrete type B-1 (1:2:4) (20 mm graded crushed stone aggregate) as in coping, bed plates and the like including weathering, slightly roundered or chamfered angles and throating, as directed including necessary form work and finishing complete all as specified.

M&L concrete bed to drain pipes including packing under haunching against the size forming cradles in cement concrete 1:4:8 type C2 for 150 mm dia pipe complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels, drains, manholes, coping, etc complete all as specified and directed

M&L Reinforced cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and directed.

RCC M-25, design mix, using 20mm graded crushed stone aggregate as in chajjas, complete all as specified & directed.

Precast cement concrete 1:2:4 (nominal mix), type B-1 using 20mm graded crushed stone aggregate as in landings, cover slabs (for manhole etc.), and similar articals with plain fair faces, set in cement mortar 1:4 complete all as specified & directed.

M&L Brick work with fly ash bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed.

M&L Brick work with sub class'B' bricks old size, straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed.

All as per Srl item No 15 above but except bricks.

M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc,; and cutting chases for concealed water tubing or concealed conduit wiring etc., and making good, cutting not exc. 10cm girth in brick/stone walls, complete all as specified.

Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified & directed

Formwork to edges of concrete flats, treads, , breaks in floors, window cills, concrete railings, openings in concrete walls, floors & roofs n exc 20cm wide & & sides of RCC/PCC bands in walls, horizontal or sloping, & similar work exc 10cm but exc 20cm wide rough finished surfaces of concrete complete all as specified and as directed.

M&L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats all as specified and directed.

M&L 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per clause 8.24 (a) of SSR Part-I 2009 (Larger size to be provided) complete all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frames shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom railon either side and as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F 18 to 20mm thick PVC solid board with one side decorative choice laminate and other side balancing white as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

M&L Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.

M&L Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples all as specified & directed.

S&F 100 mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.

100mm size hasp & staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Mild steel 300mm, ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified.

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specifed.

S & F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190gm)

S&F 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC powder coated brackets, funnels etc suitable for single curtain rod, fixed in repair, etc complete all as specified and approved by GE.

M&L Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes only shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 150 mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded crushed stone aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 75x50 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded crushed stone aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement (liquid water proofing compound shall be measured and paid separately ) complete all as specified and as directed .

M&L APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M&L APP modified roof treatment over existing accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.6mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.

40mm thick fly ash brick tiles laid on mud mortar & joints grouted flush in cement mortar (1:3) mixed with 5% if cryde oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as directed.

40mm thick brick tiles laid on mud mortar & joints grouted flush in cement mortar (1:3) mixed with 5% if cryde oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as directed.

All as per Ser item No 45 above but except brick tile using servicable brick tile retrieved from respective item of BOQ .

Supply only liquid water proofing compound.

M&L Cement concrete type C-1, 1:3:6 (using 12.5mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15mm thick screed bed in CM (1:4) all as spd and directed.

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing removing serviceable tiles from site and rubbish off the premises complete all as spd & directed.

M&L for joint free non skid ceramic coloured tiles , thickness 7 to 8 mm floor tile of size area exc 0.18 Sqm but not exc 0.38 Sqm each as in floors, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over complete all as specified and directed.

18 mm to 20mm thick marble machine cut as in cooking platform laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and roughfening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc,Brushing neat cement slurry with 3.0Kg of cement per square metre including 20mm thick screed in cement mortar 1:4, cutting and polishing complete all as specified.

Roughfening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc,Brushing neat cement slurry with 3.0Kg of cement per square metre complete all as specified.

Screed bed or bedding layer of cement mortar 1:4, 15mm thick for laying floor finishes, complete all as specified.

Granite (of any type) tiles 20mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing, laid over and roughfening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc,Brushing neat cement slurry with 3.0Kg of cement per square metre including 15mm screed layer in cement mortar 1:4 complete all as specified & directed.

Round chamfering, to the edges of granite n.exc 15mm wide on granite stone shelves complete all as specified & directed.

M&L for 10mm thick plaster in cement mortar 1:3 in fascia / edging / ceiling of Chajjas, roof projections, manholes, drinage, etc finished even and smooth without using extra cement mixed with water proofing compound. (Note: WPC shall be measured and paid seperately)

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed.

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick on brick work or concrete surfaces in CM 1:4 with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work surface even and smooth using extra cement including application of 90 micron polythene film and applying bitumen coating @ 3.00 Kg/Sqm (WPC shall measured and paid separately) all as specified and directed.

M&L Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

Preparation of new plastered surfaces of wall and applying three coats of white wash, complete all as specified.

Preparation of new plastered surfaces of ceiling and applying three coats of white wash, complete all as specified.

Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, and applying two coat of cement base paint including curing complete all as specified & directed.

Preparation of old decorated steel surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified.

M&L two coats of distemper oil emulsion over a coat of primer after application average 2mm thick wall putty including preparation of old surfaces complete all as specified and directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

Preparation of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, complete all as specified.

Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.

Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified & directed.

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed.

3 mm thick Figured glass, pin head type & glazing with oil putty in squares n exc 0.5 sq.m in each pane all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 15mm bore dia all as specified and directed.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store for bore of pipe 20mm bore dia all as specified and directed.

Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified .

Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified .

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all as specified.

Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule for bore of pipe 20mm, complete all as specified.

Stop valve cast copper alloy (ISI Mark) screwed down high pressure with crutch or butter fly handle, screwed both ends for iron pipe or unions 20mm bore dia, complete all as specified and directed.

Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

Angular Stop valve cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia, complete all as specified and directed.

S&F Bib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as spd and directed.

S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified & directed.

S& F CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as spd and directed.

S&F towel rail CP 600 mm long complete all as specified and directed.

S & F Vitreous china wash basin(Oval Shape), white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe including waste copling 32mm size full thread , all as spd and directed.

S&F Vitreous China squatting pan of orissa pattern, size 580x440mm white with supply and fixing of CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.

S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long complete all as specified.

M&L Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float complete all as specified & directed.

Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified & directed.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 75mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 50 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F 75mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed .

S&F in repair 100mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) with ovel asses door complete all as specified and directed

S&F Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete ,fixed in repair ISI Marked all as specified & directed.

S&F Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete,fixed in repair ISI Marked all as specified & directed.

Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 100mm complete all as specified.

Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branchs, bore of pipe 75mm complete all as specified.

S&F CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified.

S&F CI floor trap100mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with or without hole for waste pipe complete all as specified.

S&F cast iron cowl for 75 mm dia all as directed .

S&F cast iron cowl for 50 mm dia all as directed .

PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, rain water pipe complete all as specified & directed.

110mm bore PVC (SWR) bends any radius, complete all as specified

Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, bore of pipe 100mm, complete all as specified.

S&F stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as spd & directed.

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete all as specified and as directed.

Salt-glazed stoneware drain pipe, internal dia of pipe 150mm, laid in trenches in concrete padding jointed in cement mortar 1:1 complete all as specified.

S&F sinks with double bowls made of stainless steel 2mm thick colour black kitchen with plugs, washers , PVC waste pipe including 2 Nos waste copling ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 820x450mm x 230 mm bowl size complete all as spd & directed.

Cutting into existing manholes for connecting new drains for ineternal dia of pipe 100mm dia and above, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required all as specified and directed.

Construction of septic tank for 300 users (Brick construction with sub class 'B' bricks using old size bricks), earth work in any type of soil,Foundation in PCC1:2:4, Brick work in CM 1:4, RCC slab covers Incl RCC Precast manhole cover having 6 mm Plate embeded all around/ fibre reinforced cover with Angle Iron frame vent Shaft and Sludge chamber etc complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

M&L Construction of Soakage well 3.60 m dia and 4.50 m deep below (Brick construction with sub class 'B' bricks using old size bricks) inlet pipe level (depth from ground level to below the inlet pipe 45 cm) , earth work in any type of soil , foundation in PCC 1:3:6 , wells of Honey combed and Solid in M-25 Concrete, Incl Intercepting Chamber , screen Chamber Brick work in cement mortar , RCC cover slab in M-25/ filling with brick bats, complete all as specified and shown on drawings No CEPZ/TD-013/13 Sheet 1/5 to 5/5 Dated 11.09.13.

Taking down chowkhats or frames not exceeding 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down chowkhats of frames exceeding 1.50 sqm but not exceeding 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified.

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, hoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specifed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as directed.

Taking down brick tiles, terracing tiles, single layer from roof laid including cement mortar bedding (but not backing) complete all as specified

Demolition of stone or brick masonry built in cement mortar including all quoins, arches etc. but excluding ashlar facing, dressed stone work etc, complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from from metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new ones exc 1.5 sqm, complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed.

Dismantling of water tanks of capacity exc 500 & n exc 1000 litres, complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position, 500 ltr capacity, complete all as specified.Note :- (Cleaning, repairing etc. measured and paid seperately).

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc., and hoisting if required reconnecting and re-fixing in position, 1000 ltr capacity, complete all as specified.Note :- (Cleaning, repairing etc. measured and paid seperately).

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, internal dia of pipe 150mm, complete all as specifed & directed.

Taking down carefully unsv aluminium point wiring light/fan/socket or power complete and including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface matching with existing specification complete.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by two 2 way switches.

All as per item No 134 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in existing conduit upto and including approved 1.6 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

All as per Srl item No 136 above but one 5 pin socket outlet 5 Amps on independent board with separate switch 5 Amp one way.

All as per Srl item No 136 above but one 5 pin socket outlet 5 Amps on same board with separate switch 6 Amp one way.

All as per item No 136 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLS PVC insulated sheathed cable with FRLS PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Switch piano flush button 5 Amp single pole, one way, complete all as specified

Switch piano flush button 5 Amp single pole, two way, complete all as specified

Bell Ding Dong AC 230 volt, single pole complete all as specified

Socket outlet 2 in 1, 3 pin, 5 Amp, flush type, complete all as specified.

Socket outlet, 2 in 1, 3 pin, 5 & 15 Amp, flush type universal, complete all as specified.

Switch piano flush button 15 Amp single pole, one way, complete all as specified

Bell push 5 amp flush type, complete all as specified

S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals.

Lamp holder, insulated body, with back plate for batten fittings including 14 watt LED lamp complete all as specified.

S & F Fan regulator step type suitable for 1200/1400mm sweep ceiling fan hum free, 100Wincluding necessary connections complete all as spd and directed.

S & F in replacement LED batten box type made out of white powder coated CRCA with decorative end cap alongwith LED T8 tubular lamp 20W Linear LED T8 tubular lamp with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old unsv tubelight fitting any type.

Supply and fixing the bulk head light fitting LED type 10 watt made of pressure die cast aluminium housing complete with lamp and having IP-63 protection and fixing on wall/ceiling complete with all accessories and including connecting up with ceiling rose by using PVC insulated and overall sheathed flexible copper conductor cable 3 core 0.50 Sq mm.

S & F mirror light 07 watt LED type with all accessories including inbuilt lamp connecting electrically to ceiling rose using cord flexible 3core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.

S&F in replacement Energy saving, surface mounted, bulk head LED luminaire 10 W with PDC aluminium housing and polycarbonate diffuser complete including connecting up with three core twisted flexible copper conductor cable of suitable size.all as specified.

Supply and Fixing Ventilating fan AC single phase 230/240 volts of size 300mm sweep with loure of metalic body with grouting with nut bolts and making the suitable hole suitable for 300mm sweep exhaust fan by breaking the existing wall and making the plastering and matching with existing surface / specification and all as specified and directed.

S&F double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 8 way double door open able complete, including taking out old unsv MCB DB any size/type.

S&F 6 to 32 A SP MCB single pole 240 V 10 KA C Series.

S&F MCB single pole 40 Amp 240 volts .

S&F 40 Amps SPN MCB single pole 240 V 10 KA .

Sheet metal enclosures single pole and neutral earth enclouser with a two pole and earth metal plug and socket complete with one single pole MCB 20 amps, 240 volts, complete all as specified.

S & F LED street light 30 Watt highly efficient with IP66 protection made out of pressure die cast aluminium body complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including GI pipe bracket 40 mm dia complete all as specified and as directed.

S&F in replacement sub Main Wiring with two single core FRLS PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x6.0 sqmm and one single core FRLS PVC insulated multistranded unsheathed flexible copper conductor 6.0 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in and including not metallic PVC concealed conduit (heavy grade) not less than 20mm dia and 1.8 mm thick with all fitting viz tees, bend, junction box including cutting chases on existing wall for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing surface complete all as specified and directed.

M/S J N TRADERS

M/S CANTILEVER ENGINEERS

D R CONTRACTORS

M/S INDIAN ELECTRICAL

abrol enterprises

VIJAY KUMAR LAKHNI