PROVISION OF GARDEN LIGHTS WITH ASSOCIATED WORKS AT VARIOUS PARKS INSIDE NOFRA AND OUTLYING AREAS AND PROVISION OF COMMAN TOILET AT VANDANA VISHAKHA UNDER GE (NW) NOFRA

Amount

Supply and fixiing steel tubular swaged street light poles complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410 SP-31, 8.50 mtr long and painting with two coat of aluminium paint over one coat of primer on exposed surface of pole all as specified and irected by Engr-in-Charge. (NOTE :- Excavation will be ,measured and paid seperately)

Supply & fixing hot dip galvanized anti corroded weather proof octagonal mild steel electric poles 7 mtrs long top mounting on foundation complete with base plate and final including PCC foundation as per manufacturer design with 1500 mm long Arms bracket,tapper plug,bolts nuts and screws (Pole plate thickness - 04 mm , pole bottom dia - 135 mm top dia 70 mm ) etc as specified complete all as specified and directed including taking out existing damaged pole with street light bracket complete.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling mass concrete including necessary form work.

M&L PCC 1:3:6 type C2 using 40 mm graded aggregate as in foundation filling mass concrete including necessary form work.

Supply and fixing FRP type looping box of 300 x 200 x 125 mm size with necessary arrangement to fix the looping box with suitable size of cable glands with entry, nuts, bolts, washer flat iron including 3 core 2.5 sqmm wire from looping box to light fittings connector etc comprising of the followings:- (a) bus bar -04 Nos (b) Insulator - 08 Nos (c) Nut and bolts for cable joint as pre requirement

Supply and fixing FRP type looping box of size 250 x 125 x 100 mm including necessary arrangement to fix the looping box with suitable nuts, bolts,washers flat iron etc comprising of the followings:- (a) MCB, 6 to 32 Amps, SP (10 KA) (B serires)-01 No.

Supply & fixing LED Flood light fittings 120 Watt capacity in aluminium pressure die cast housing with toughened glass cover, High Power LED, secondary optics, IP 65/66, 10KV SPD, >100lm/Watt including wiring complete all as specified & directed.

Supply, Installation, Testing and commissioning of heritage aesthetic look (RAL Color Code 9007) post top luminaire having symmetrical distribution beam angle of 120°X120° (±5%) with housing material of Die-cast aluminum, powder-coated finish, PC cover; system wattage not exceeding 33W and system lumen output of not less than 3900 lumens with efficacy not less than 118lumens/W. CCT of 3000K and CRI>=70 with SDCM<5. Weight not more than 8.5 kgs. Fixture shall operate in a temperature range of 0°C to 50°C . Fixture shall have input voltage for 100 – 277 VAC, 50/60 Hz. Lifetime should be at least 50,000 burning hours at L70 at 40 degree centigrade ambient. Fixture shall equipped with total IP65 protection and mechanical impact of minimum IK08. The fixture should be capable of surge protection upto 20kV minimum with salt spray test of 50hr. Luminaire driver should be EMI/EMC Compliant Luminaire dia must be minimum 460mm. LM79 and LM80 reports must be submitted along with the bid. Luminaire and driver should be of same make. Luminaire ies file (photometry file) must also be submitted along with the bid. Similar to PHILIPS BSS461 LED40WW 110-277V UNICLASSIC Should include Decorative poles with base plate and all associated items made out of MS pipe (finished with P.U. painted shade) of 301 Cm height and window at the bottom for space for MCB and terminal block for fixing LED post top integral mounted decorative LED light post suitable for 40/25/20 mm dia GI bend to desired shape as directed by Engineer-in-Charge. Similar to GUANA Poles. (NOTE-(i) The new light and pole should match the existing light and pole in terms of design and quality, for asthetics of station. (ii) Intrested contractor can visit the site before quoting of his rates.)

Supply and fixing LED lights fittings 9 W robustly designed IP 65 of lenght 0.8 mtr With die cast aluminium housing, polycarbonate cover, single phase, 50Hz complete with all accessories including all as specified and directed.

Supply and fixing LED light 10 W cylindrical shaped integral decorative LED bollard with Opal acrylic diffuser and IP 65 With all acessories including PCC foundation tapper plug bolts,nuts,screwed and GI pipe 76 mm dia etc complete all as specified and directed by Engr-in-charge.

Supply & fixing LED Flood light fittings 75 Watt capacity in aluminium pressure die cast housing with toughened glass cover, High Power LED, secondary optics, IP 65/66, 10KV SPD, >100lm/Watt including wiring complete all as specified & directed.

Supply, laying, commisssion & testing XLPE insulated armoured LT cable, 110 Volts grade with aluminium conductor of size 4 core 16 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed.

Supply and fixing iron clamp (flat 25 x 4 MM) with nuts, bolts, washers and removing old clamps.

Supply and fixing bracket for street/security light fitting made of GI pipe 40 mm light grade 1.2 m long bend to shape including two Nos of clamps nuts and bolt as required.

Supply and fixing bracket for street/security light fitting made of GI pipe 50 mm light grade 1.2 m long bend to shape including two Nos of clamps nuts and bolt as required.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed. (Note : 1. The cost of Al thimbles/lugs etc is incl in quoted rate and no extra payment will be made for it.)

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 2 core. laid in duct / along pole/wall etc including making connection complete all as directed.

M&L for straight through jointing heat shrinkable kit for cable of 50 sqmm 3.5 core suitable for aluminium conductor complete for LT cables all as specified and directed by engr-in-charge.

Supply and fixing LED post top integral pole mounted UNISCAPE decorative LED post top upto 45Watt with IP65 protection suitable for 40mm dia GI tubing including all s specifed and directed.

Supply and Fix High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of dia 20mm all as specified and directed by engr-in-charge.

Supply and Fix in repair street light/Decorative Light timer suitable for 230V,50Hz,1 Channel Control and automatic operating modes, IP rating 20 and which automatically switches on and off street Light/Decorative Light all as specified and directed by Engineer-in-Charge.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :-

(a) One light point controlled by one switch SP one way.

(c) One Exhaust fan point controlled with one 5A switch

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly.

Supply and fix in repair Modular Switch, 6Amp, One way, 1 module.

Supply and fix in repair Modular blank plate, One way, 1 module.

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module.

Supply and fix in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified.

Supply and fix in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module.

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module.

Supply and fix in repair Modular white cover plate with Frame 1 Module.

Supply and fix in repair Modular white cover plate with Frame 2 Module.

Supply and fix in repair Modular white cover plate with Frame 3 Module.

Supply and fix in repair Modular white cover plate with Frame 8 Module.

Supply and fix in repair Modular metal flush box 1 module.

Supply and fix in repair Modular metal flush box 2 module.

Supply and fix in repair Modular metal flush box 3 module.

Supply and fix in repair Modular metal flush box 8 module.

Supply and fix in repair Linear Aluminium Batten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.

Supply and Fix batten intergrated LED channel 1x12 WH, flexible neck for adjusting beam, bronze finish for superior feel, 3000K with warm white (Color rendering CRI>8) complete accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

S&F 8 way Double door type having protrection IP-65, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :-

S & F MCB SPN 40 Amps, 240 Volts, C Series .

S & F MCB SP 6-32 Amps, 240 Volts, C Series .

S&F Exhaust fan 225 mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site.

S & Fix Pressure Pump suitable for bathrooms upto 0.5 hp with complete fittings to pipe internal or external all as specified and directed by Engineer - in Charge.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mr in depth for foundation, laying of UG Electric cable / staying of steel tubular pole etc. And getting out in soft and loose soil and making good disturbed surface to match

Removing the excavated material/soil not exc 50m out of MD land complete all as specified and directed.

Returning & filling in, including spreading, levelling, watering & well ramming in layers not exc 25cm as in soil complete all as directed.

Material and labour for dry clean river sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. (Note :- Only compacted thickness of sand will be measured and paid.)

Supplying and laying un-reinforced precast concrete cable cover, class LV Type I, flat, size 250 mm x 150 mm x 40 mm. laid in trenches complete all as specified and directed.

Supply, laying, commisssion & testing in repairs XLPE insulated armoured LT cable, 1100 Volts grade with aluminium conductor of size 4 core 16 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed.

Supply and fixing Recess Mounting LED panel, 2'x2', 34 Watt capacity,(MOTION SENSOR TYPE) white Light, environmentlal friendly, new generation, ashthetically designed ultra modern, fully diffused, white powder coated, with polymer diffuser complete with acessories suitable for Armstrong/Grid Ceiling all as specified and directed .

S&F of New LED Bldg security light 90 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP65/66 Protection including 40 mm dia pipe bracket fixing on wall at any height with 01 nos of MS clamp of suitable size,complete all as specified and directed.

Supply and fix touch free infrared sensor type hand dryer of suitable dimensions and weight (suitable at site) with voltage range of 220-240V ,50Hz freq. drying time less than 30 sec all as specified and directed by engr-in-charge.

Excavation in trenches n,exc 1.5m wide and n.exc 1.5m depth for foundation etc or for shafts, wells,cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n exc 1.5min depth and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble, mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making surface good in hard/dense soil complete all as specified and directed.

M & L for precast cement concrete soild block masonry with soild blocks using PCC 1 :3:6 type C1 using 20 mm graded stone aggregates exc 10 cm in width and setting in cement mortar (1:6) comprising of compressive strgth of 50 kg/ cm2 etc complete all as specified .

M & L for Precast cement concrete solid block masonry with soild blocks using PCC 1:3:6 Type C1 using 20 mm graded stone aggregates n exc 10 cm in w idth and setting in cement mortar (1:4) comprising of compressine strgth of 50 kg /CM2 etc compltet all as specified .

M & L for PCC 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concret etc. complete all as specified and directed.

M&L for fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.

M&L for fair finish 20mm thick plaster in two layers 15mm thick base coat and 5mm thick as finishing coat with readymix prepacked proportioned dry mix mortar mixed with Polymer Fiber fair faces of brick wall or concrete surfaces additives, on external surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply only.

Supply only integral water proofing compound ISI marked.

M & L for preparing new plastered surfaces on walls and applying two or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (compony depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of oil emlusion distemper white or tinted over a coat alkali resistant priming paint over 3mm thick wall care putty on wall complete all as specified and as directed .

M & L for joint free Non skid rectified coloured ceramic tiles 7 to 9 mm thick ( square/ rectangular) area of each tile of each tile 400mmx400mm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for rectified Coloured glazed ceramic tiles in vertical surface 400 X800X9mm thick , set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles including 10 mm thick backing coat in CM 1:3 complete all as specified and directed.

M & L for Granite (Z-black) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types incl 15mm thick Screed bed or bedding layer in CM 1:4 for laying floor finishes complete all as specified and as directed.

M & L 20 mm thick Granite (Z-black) work (table rubbed and polished) in steps, jambs, pillars, double window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Extra over granite stone slabs for edge polishing/ chamfering/ noising/ grooves/ bevelling etc complete all as specified and directed.

S&F Rolled mild steel as in Joist, channel, angle, or tee sections Fe 410 -W(Gde-E- 250) quality-A, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated)

S&F for rolled mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed .

S& F for mild steel framed work such as grills, gratings, angle irons, pipe sections, flat iron, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders; framed balusters; walk ways; railings; framework of water tanks, embedded in concrete and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa asas in ridges/flashing, fixed with self tapping screws as specified and directed. as in ridges/flashing.

Supply and Fix Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers , stop valve boxes, gate stops, parts of ranges , balusters and similar articles exc 5 Kg each. complete all as specified and as directed.

S&F powder coated aluminium frame/shutters for partition, doors, windows, ventilators etc. including joining cleat for fixing, PVC rollers, locking arrangement, rubber beading, rubber gasket, screws, handles, hinges, tower bolts etc. complete all as specified. (Note :- (i) Glazing and wire mesh shall be measured and paid separetely for supply only as the labour element included in this item. (ii) Item shall be paid as per weight of aluminium section. (iii) the rete quoted shall be inclusive of the cost of neoprene beading, glazing pin. screws and powder coated fittings such as hinges, handles, locking arrangement etc as required, which shall not be measured for arriving the weight. (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.)

S&F 4 mm thick figured glass, pin headed type, in squares n exc 0.5 Sqm in each pan.

Supply and Fix powder coated aluminium anodised grill (thickness of coating minumum 50 micron) with and including suitable powder coated aluminium 'F'/ 'H' section frame 23.40x15.30x1.40 mm thick with aluminium rebated/ screwed attachment complete all as specified and directed in following situation :- (Note : (i) Aluminium grill shall be of approved make as per Design No. DG102, 7.50 mm x 6 mm and weight shall not be less than 3.131 Kg/ Sqm or approved design.)

S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm /600 mm long and wall angle. The main runners to be placed @ 1200 mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200 mm X 600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600 mm X 600 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber /GI / Aluminium framework with screw complete all as per manufacturer's instruction.

S&F Factory made single extruded WPC (WoodPolymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

M&L factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screwsand as per specification & drawing complete all as specified and directed.

S&F 100mm stainless steel butt hinges medium weight fixed with Stainless Steel Screws

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long

S&F extruded aluminium alloy handle fabricated type anodized 150mm long.

Supplying and laying of CPVC 20mm pipes SDR 11 & Plain CPVC SDR 11/ (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of CPVC 25mm pipes SDR 11 & Plain CPVC SDR 11/ (including special fittings if any i.e. Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor etc) fittings on walls/ceiling or laying in floors complete all as specified.

M&L for cutting chases for concealed water tubing and making good in cement mortar 1:3 girth of cutting n.exc 10cm in brick walls complete all as specified and directed.

Supply and fix 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified .

Supply and fix 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified .

S&F for Kubix Table Top ceramic wash hand basin vitreous china rectangular shape It has a smooth finish and (Colour approved by GE) of size 565x425x140 mm, fonte with including brass chromium plated waste coupling 32mm with long screwed and fly nuts ,incl 60 cm long, 32mm dia PVC(flaxible) type waste pipe.

S&F for kubix prime tall boy sensor faucet for wash basin with pre-mix water supply kit (battery operated) including assessaries.

S&F for ceramic vitreous china Bowl With Cistern, Coupled WC Size: 375x650x800 mm with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fitting, S Trap- 250 mm, including fixing Accessories And Accessories Set, complete fixed.

S & F Vitreous China bowl urinal flat back with sensor with complete kit (battery operated) fixing accessories set, size of 480x300x740 mm, with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.

S&F Toilet paper Holder Recessed Type (Stainless Steel) aprroved make complete all as specified and directed.

S&F Soap Dispenser Push Button ,capacity 0.8L, ABS material and finished with white/smoked of approved make fixed with two Steel/ CP Screws complete all as specified and directed

S&F Paper towel Dispenser, capacity 400-600 towels with c/z folds , wall mounted with AISI 304 stainless steel materials, satin finished of approved make complete all as specified and as directed.

S&F Stainless steel wall mounted support toilet Grab Bar 300mm of approved make fixing with screw complete all as specified and as directed.

S&F Health faucet (ABS Body) of approved make mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long spirochrome Flexible tube and wall hook including making connections and fixed in position complete all as specified and directed.

S&F 15mm dia bore chromium plated Two way Bib taps with flange of approved make complete all as specified and directed.

S&F 15mm dia bore chromium plated Angular Stop Cock with Wall Flange of approved make complete all as specified and directed.

S&F 15mm dia bore chromium plated Bib Cock with Wall Flange of approved make complete all as specified and directed.

S&F stainless steel single towel rail, 600mm long of approved make complete all as specified and directed.

S&F stainless steel towel ring square with round flange of approved make complete all as specified and directed.

S&F Swivel Mirror 615 X 445mm, Oval Shape of approved make complete all as specified and directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm with brass adapters, washers etc complete all as directed.

S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE any location, any floor complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any locationetc complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including GI clamps of approved shape and size approved by GE at any height complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bends/shoes any radius fixed to pipe at any location etc complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cementcomplete all as specified and as directed by Engr-in-Charge

S&F 50mm, Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

M & L for concrete bed to drain pipes PCC (1:4:8) type D2 using 40mm size graded stone aggregates including packing under and haunching against the sides of pipes after they are laid and tested of 100mm dia pipe with cement concrete 1:4:8 type D-2

S & F 3 mm thick Aluminium composite panel cladding plain metallic of approved colour/ shade to beam/ column/ slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour & Aluminum tubular hallow section 25 x 25 mm not exceeding 900 mm c/c on exceeding col/beam/ slab to hold APC cladding etc. (Note:- Colour/ Pattern of ACP sheet shall be given by GE)

Supply and fix stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, for the barricades in front each ICR machine for IN and OUT with suitable arrangement as per approval of Engineer-in-charge. ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

Supply and fixing 2000 Litres rotational moulded PVC tank in position at any location on top of the building including removing existing tank disconnecting all incoming and out going connections, provision of new fittings suitable up to 80mm bore GI pipe all as per existing requirements all as specified and directed. Make :Sintex ,Infra,Polycame

Supplying and fixing 25mm bore brass float valve flat type, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

Panther Facilities (BID ID -3266117)

ADITYA CONSTRUCTION (BID ID -3266241)