Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹52.0 LAccepted-AOC B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹57.5 L+₹4.4 L (8.30%)Rejected-Finance | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹59.3 L+₹6.3 L (11.8%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹59.9 L+₹6.8 L (12.8%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹80 L
EMD Value
₹1.6 L
Closing Date
31 May 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8938 REPAIR AND MAINT TO CERTAIN BUILDINGS IN ZONE 1 IN ND MBI UNDER AGE BR I UNDER GE NW KUNJALI
2023_MES_593062_1
8938/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.6 L
Yes
21 Oct 2023
3 May 2023
2 Jun 2023
10 May 2023
31 May 2023
17 May 2023
3 May 2023 - 10 May 2023
Amount
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified.
Taking down and refixing of shutter in same opening after rescuring or easing and adjusting in the same opening of any description n exc 1 Sqm each complete all as specified and as directed.
Taking down and refixing of shutter in same opening after rescuring or easing and adjusting in the same opening of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and as directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan neck, etc. including cleaning or refixing or removal to store ( measured over all as fixed along the centre line over fittings and accessories)
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling wrought iron or mild steel work of any description.
Dismantling false ceiling/boarding any description fixed in any position with nails.
Taking up or down 15 mm bore GI tubing and connection including cleaning for re-fixing or removing to store complete all as specified and directed.
_Ditto_ all as per Sl item No. 10 here in before but 20 mm bore complete all as specified and directed.
_Ditto_ all as per Sl item No. 10 here in before but 25 mm or 32 mm bore complete all as specified and directed.
S & F tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.
_Ditto_ all as per Sl item No.13 here in before but 20 mm bore of pipe
_Ditto_ all as per Sl item No. 13 here in before but 25 mm bore of pipe
Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar (bedding but not backing), removing serviceable tiles to store and rubbish off the premises.
Hacking out old broken glass (any thickness, size, quality or description) from wooden & Steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.
Taking down cement plaster on brick/ stone surfaces built in cement mortar including raking out joints, hacking for key scrubbing down with water etc complete.
Demolition of plain cement concrete of any description and in any position not other wise specifically provided for.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc
M&L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6)
All as per item No. 23 above but half brick thick wall built in CM 1:4.
M&L for 100 mm thick PCC 1:2:4 type B-I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed by EIC.
M&L for 40mm thick PCC 1:2:4 type B I using 20mm graded stone aggregates as in floor finished cement concrete surfaces even and smooth using extra cement complete all as specified and directed by EIC
S&F Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete shall as specified.
M&L for Sheet glass 4 mm thick, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm.
M&L for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications.
M&L for 12 mm thick pre-laminated Medium Density board,both side decorative lamination interior grade,fixed in aluminium/ wooden frame work.
S&F in repairs 12mm thick, toughened glass for door, shutters, partitions, sheves etc with and including fitting and fixtures such as glass handles, studs, fittings for door pivots etc complete all as directed
S&F 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished, type B-11
S & F 100 mm Butt hinges, mild steel, with mild steel hinge pin, bright polished, type B-11
S&F Aluminium anodised sliding door bolt 300 mm long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .
S&F 250 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed in repairs complete all as specified and directed.
S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm.
S&F 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.
M&L for 300mm, ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed by EIC.
S&F aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg
M&L for double action floor spring hydraulically regulated made up of minium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction.
S&F in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed
S&F in repairs 4 mm thick bakelite sheet with decorative choice laminated on both side completion as specified and as directed
S&F Roller blinds type made out of standard cloth of approved texture with necessary accessories etc fixed on window openings complete. Make: D' Decor
M&L for vitrified ceramic tiles 10 mm thick (square /rectangular ) polished dark shade, area of each tiles not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed white or coloured cement to match the dark shade of the tiles, with and including screed bed in CM 1:6, 20 mm thick all as specified and directed .
All as per item No. 46 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.
M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm,in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified.
All as per item No. 48 above but as in skirting including 10mm thick rendering in CM. 1:4 as backing coat etc complete.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.
S&F in repair for 8mm thick wooden flooring laid down over necessary cushion foam 2-3mm thickness over levelled surface complete all as specified and as directed. (Make : Hego/pergo)
S&F in repair for 8mm thick wooden skirting on vertical surface complete all as specified and as directed. (Make : Hego/pergo)
M&L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified.
M&L for Hard wear stone (of any type) granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types and including 15mm thick screed bed in CM 1:4 complete all as specified.
M&L for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type and including 10 mm thick backing coat in CM 1:3 complete all as specified.
S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit with and including 6mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)
Material and labour for providing PVC wall panelling consisting of PVC insulated panel having wall thickness of 2mm PVC sheet of density 600 Kg /Cum manufactured by an ISO 9001-2015 certified company and the desired thckness of Expaned polystyrene (EPS) (dependant on the insulation required) screwed into the wall using screws of adequate length. The screws shall be placed at a distance of 150mm and shall be 25mm from the edge of the insulated panel on all four sides of the panel. The PVC strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck using solvent cement adhesive at the places where two panel are joined, so as to cover the screw of both the panels, using solvent cement. 90 Degree heat bent strips of 5 mm thick PVC sheets of width 75mm x 75mm feathered at the edges shall be stuck at wall joints/pillars etc. All as specified and directed.
Errection & dismantling of MS tubular double scaffolding (H frames) upto ht of 30 m & with necessary brassing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth for carring out external facework of walls all as directed by Engr-in-Charge.
M&L for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and column, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as directed.
M&L for mild steel TMT bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0
All as per item No. 61 above but as in stirrups.
S&F for rolled mild steel Sections of Grade Fe 410-W, (Gde- E-250) quality-A, as in post, runners, rafters, purlins, trusses, steps etc fixed with connecting plates including bending, welding etc complete
S&F for mild steel plates of Grade Fe 410-W, (Gde- E-250) quality-A as in connecting pletes, base plate etc. welding etc complete all as specified and directed
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
All as per item No. 65 above but plain galvalume sheets for ridges/ Flashings.
M&L for 1.5 mm thick galvanised steel sheet as in Valley gutters fixed with rivets or other suitable arrangements over MS brackets Trapezoidal shape of required profile with desired slope etc complete all as specified and as directed by Engr-in-Charge.
S&F white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc, fixed in repair complete all as specified complete all as specified and as directed.
S&F white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover etc, fixed in repair complete all as specified.
S&F vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1: 2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe.(Exclusive of fixing supply pipe to flushing cistern , trap and waste pipe).
S&F white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete
S&F in repair for oval shaped coloured vitreous china WHB table top fancy type of overall size 595 x 380 mm, cat No 7751 of cera or of equivalent make specified here-in-after including 32 mm CP waste coupling, PVC waste pipe etc complete, including granite slab counter of black colour as approved and of size 1.20mtr x 0.60 mtr includingrounding edges etc cutting nitches rounding edges etc complete, horizontally supported by 01 No of 35 mm thick cuddappa stone slab one side mirror polished and vertically supported by 02 No 35 mm thcik complete all as specified and directed by Engr-in-Charge.
S&F 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. Complete.
S&F 15 mm bore dia of pipe, brass chromium plated fancy type bib tap fixed in repairs
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F PVC Connections 15mm size with PTMT nuts of length 600mm
S&F brass chromium plated shower rose 125mm size, fixed in repairs
S&F chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange, fixed in repairs.
S&F Soap dish, vitreous china white, approximate size 160X160X90mm fixed in repairs
S&F 160mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls with and including fixing clips, bends, elbow, shoes etc. (Note:- Measurment shall be taken along the centre line of the pipes.)
S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches.
S &F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed
S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed
S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed
M&L for rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finishing the surface fair and even all as specified and directed.
M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3mm thick and alkali primer.
M&L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer.
M&L for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces in ceiling finishing the surface even and smooth all as specified and directed.
M&L for preparation of newly plastered surfaces in ceiling , applying three coats of white wash.
M&L for complete removal of existing treatment in ceiling surfaces and applying three coats of white wash
M&L for plastering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) using Pidiproof LW+ water proofing chemical of Dr. Fixit or as per manufacturer's instruction and finishing the surface even and fair. (Water Proofing Chemical shall be measured and paid seperately)
Supply only water proofing chemical
M&L for preparation of newly plastered or un plastered wall surfaces, over 10cm girth, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for complete removal of existing plastered wall surfaces, over 10cm girth, preparation of surfaces, applying two coats of 100% acrylic, weather resistant emlusion over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction.
M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
M&L for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.
M&L for PCC 1:3:6, type C2 (Using 40 mm graded stone aggregates) 75mm thick as in plinth protection etc complete
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for
M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed
S & F perforated vinyl graphics stickers having departmental logos fixed on glass made from 3 M make.
Removing debris exc. 1.50 Km but n exc. 25 Km and depositing where directed, in soil outside MD land.
jalandhara construction
Shetty Construction Co
Nilesh Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .