NIT NO. 337/Durg(Rajnandgaon)/2026

NIT Shedule for Construction of Balance Work of Judicial Staff Residencial Quarter & 03 Nos. 'H' Type Quarter, i/c Water Supply & Sanitary fittings complete at rajnandgaon (CG)

S.O.R. for Building work issued by E-in-C- P.W.D. Raipur w.e.f. from 1.1.2015 & upto date amendment PAC Rs. - 55.56 Lacs

S.N S.O.R. ITEM No. PARTICULARS QTY. UNIT RATE AMOUNT

1 3.2 Providing and laying nominal mix reinforcement cement concrete with crushed stone aggregate using concrete mixerupto plinth level excluding cost of form work.reinforcement and form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). 64.86725000000001 cum 4163 270042

Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

2 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 8108.406250000002 kg 54.5 441908

3 2.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape 178.07999999999998 sqm 297 52890

2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 182.61749999999998 sqm 235 42915

2.1.8 Beams, lintels, cantilevers & walls 158.54750000000004 sqm 202 32027

2.1.13 Weather shade, chhajja, Cornices and mouldings 25.14 sqm 294 7391

2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings 42.125 sqm 230 9689

4 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 995.24955 cum 371 369238

5 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263 0

+ 7.51 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor

2nd Floor 61.084 cum 3626 221491

6 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level :

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand)

+ 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:

7 7.2 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. 89.95500000000001 sqm 62.5 5622

8 9.18 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer.

9.18.4 Single rebate 100mmx50mm size, 1.6mm thick sheet. 106.8 metre 474 50623

9 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

8.12.3 30 mm. thick (single leaf) 133.7625 sqm 1832 245053

10 8.15 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm.An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. 42.629999999999995 sqm 2583 110113

11 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:

9.47.1 For fixed portion 606.8699999999999 Kg 331 200874

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). 717.2099999999999 Kg 338 242417

12 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.2 With float glass panes of 5 mm thickness 110.33999999999999 sqm 708 78121

13 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.

14 8.138 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.

15 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.

16 8.140 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.

17 8.125 Providing and fixing aluminium door mounted door stopper with necessary nickel plated iron screws etc complete.

18 9.12 Providing and fixing steel door with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer.. 992.25 KG 71.5 70946

19 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat of red oxide zinc chromate primer.. 1005.4722 kg 67.5 67869

20 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) 819.3137500000003 sqm 87 71280

21 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. 58.68 sqm 86 5046

22 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In cement Mortar 1:6 (1 cement : 6 fine sand) 576.96 sqm 91.5 52792

23 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In cement Mortar 1:6 (1 cement : 6 fine sand) 1283.8200000000002 sqm 107 137369

24 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

25 12.9 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

26 13.3 15 mm thick Marble work (machine cut, table rubbed & polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish.

13.3.5 Udaipur green marble 5.651999999999999 sqm 1808 10219

27 12.79 Providing and laying Double /Multi charge (min 2.0 mm thick layer) Vitrified floor tiles with water absorption less than 0.05% and conforming to IS : 15622-2017 of of 1st quality of approved make in all colours and shades and size mention below (+/- 10mm), laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete.

12.74.3 Size 600x600mm thickness 8 to 9 mm 285.11999999999995 each 1082 308500

28 12.74 Providing and fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make in all colours, shades over 20 mm thick bed of Cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.74.1 Size 300x300mm thickness 7 to 8 mm 238.25 sqm 779 185597

29 9.57 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete.

30 14.13 Providing and applying 2mm thick ready mix exterior grade approved make putty (like Birla wall care, Alltek Superfine W/R of (NCL), Asian, ICI, Nerolac, J.K. wall putty) on walls to make the surface smooth and even. 2680.0937500000005 sqm 94.5 253269

31 14.16 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturer's specifications to give protective and decorative finish including cleaning washing of surface etc. complete with:

14.16.1 On new work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 1342.32 sqm 74.5 100003

32 14.12 Applying one coat of cement primer on wall surface (applied @ 0.80 litrs/10 sqm) complete. 1337.7737500000005 sqm 23 30769

33 14.10. Wall painting with acrylic premium emulsion (plastic) paint of required shade to give an even shade.even shade.

14.10.1 On new work (Two or more coats ) 1337.7737500000005 sqm 44.5 59531

34 14.22 Painting on new work (two or more coats) to give an even shade with:

14.22.1 Satin synthetic enamel paint 89.16149999999999 sqm 55 4904

35 19.42 Providing and placing on terrace (at all levels) polyethylene water storage tank ISI marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 15000 litre 7.3 109500

36 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

CONCEALED WORK including cutting chases and making good the walls etc.,

19.5.2 20 mm nominal outer dia .Pipes. 17.549999999999997 metre 167 2931

19.5.3 25 mm nominal outer dia .Pipes. 10.8 metre 213 2300

37 19.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

INTERNAL WORK - EXPOSED ON WALL

19.4.2 20 mm nominal outer dia pipes 48.5 metre 151 7324

19.4.3 25 mm nominal outer dia pipes 76.1 metre 199 15144

19.4.5 40 mm nominal outer dia pipes 160.5 metre 362 58101

38 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including

18.1.3 White Orissa pattern W.C. pan of size 580x440 mm 3 each 2899 8697

39 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

18.17.2 White Size 550x400 mm 42 each 1408 59136

40 18.22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

18.22.2 560x410 mm bowl depth 215 mm. 3 each 6210 18630

41 18.76 Providing and fixing on wall face UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion

18.76.1 75 mm dia pipe. 85.35 metre 182 15534

18.76.2 110 mm dia pipe. 220.2 metre 267 58793

18.76.3 150 mm dia pipe. 189 metre 440 83160

42 14.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for therma

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

18.77.3 Vent covel

18.77.6 Nahani trap 110x75mm 120 each 90.5 10860

43 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

19.14.1 Bib cock (400 grams 64 each 382 24448

19.14.3 Long body bib cock (500 grams) 30 each 426 12780

19.14.7 Angle valve for basin mixer and geyser points (450 grams) 87 each 382 33234

19.14.15 Shower rose (revolving type) (150mm) 15 each 269 4035

44 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 30 each 51 1530

45 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

19.16.1 25 mm nominal bore 81 each 436 35316

46 12.65 Providing & laying 60mm thick precast interlocking concrete blocks of approved size (approx 305 sqcm) and shape/ pattern, over 40 mm thick average complete coarse sand bed with joints of 3mm thick filled by fine sand including leveling with surface vibrator, temping and sweeping etc. complete of minimum compressive strength of 250 kg/sq.cm

12.65.2 Pigment Coloured (rubber mould) precast interlock concrete blocks 347.57699999999994 Sqm 632 219669

47 20.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:

20.2.2 150 mm diameter S.W. pipe 142.6 metre 436 62174

48 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I.cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

20.28.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : 15 each 3796 56940