PROVN OF ROOF TREATMENT IN PCDA OFFICE AND RPOVN OF TOILETS AND URINAL AT PCDA OFFICE AT JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Job No: AN/II/114/ Roof Treatment "Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by adherence of manufacturer's instructions (d) after drying one coat of roof coat paint Home damp shield elasto or equivalent of following makes shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 05 years shall be submitted by the contractor Make: Make: Sika/ Asian Paints (Except smart care damp proof)/ IWL/ Berger Paints/ TikiDAN equivalent makes

Excavating in post holes (or similar holes) each n.exc 0.50 cum,getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil complete all as specified.

M&L PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling and mass concrete complete all as specified. Roof treatmet: 0.11 cum Toilet Urinal: 4.50 cum

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290.Gde-E-165 complete as specified.

M&L Applying two coats of synthetic enamel paint over one coat of red oxide primer on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified.

Job No: AN/II/114/ Toilets and Urinals Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & n exc 1.5m in depth & getting out in soft/loose soil as specified. B/R - 35 Cum, E/M - 32 Cum

M&L Brick work with subclass 'B' bricks (old size), straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified

M&L Brickwork with subclass‘B’ (old size) bricks, straight or curved on plan to any radius in half brick thick walls built in CM ( 1:4), complete all as specified

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizintal or sloping & similar work exc 10cm but n exc 20cm wide fair finished surfaces of concrete complete as specified.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in lintels upto 1.5m clear span, seismic and other similar bands, lintel bands, plinth bands, roof bands and the like complete all as specified. Note :- Reinforcement & formwork shall be measured separately.

M&L for reinforced cement concrete (nominal mix) 1:2:4 type B1 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, shelves and the like complete all as specified. Note :- Reinforcement & formwork shall be measured and paid for separately.

M&L Mild steel TMT bars 10mm dia Fe-500D and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified

All as per item No. 14 above but mild steel bars TMT 6mm to 8 mm dia Fe-500D complete all as specified.

All as per item No. 14 above but 6 to 8mm dia in stirrups, spacers and binders complete all as specified.

Labour only for Earth filling under floors including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified. Note :- Soil obtained from excavation under item 6 here-in-before shall be used for filling.

Returning,filling in, including spreading, levelling watering and well ramming in layers n.exc 25 cm in soft/ loose soil complete all as specified. B/R - 48 Cum, E/M - 20 Cum

Removal of excavated soil to a distance exc. 250m but not exc. 500m and depositing where directed complete all as specified. B/R - 12 Cum, E/M - 12 Cum

M&L for 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even complete all as specified.

M&L rendering 15 mm thick in CM(1:6) on brick masonry surfaces, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 10mm thick in cement mortar 1:3 on brick/ concrete masonry surfaces in ceilings finished fair and even

M&L for rendering 15mm thick in cement mortar 1:4 on brick masonry surfaces or surface other than fair face of brick work of walls, finished fair & even.

M&L for preparation of new plastered surfaces and applying two coats of weather base paint of approved shade on walls over and incl a coat of 1mm thick wall care putty all as specified

M&L for preparation of new plastered surfaces and applying two coats of plastic emulsion paint of approved shade/tint over a coat of birla wall care putty on walls complete all as specified.

M&L for preparation of new plastered surfaces and applying two coats of plastic emulsion paint of approved shade/tint over and incl a coat of 1mm thick wall care putty on ceilings complete all as specified.

M&L for 30mm ( average thickness ) PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floors and surfaces finished fair & even.

M&L 15 mm thick screed bed or bedding layer of cement mortar 1:6, for laying floor finishes complete all as specified.

M&L light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

S&F light shade Vitrified Ceramic tiles edge cut 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl 10mm thick plaster on vertical surfaces in CM (1:4) complete all as specified.

M&L for coloured Non Skid Ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

S&F Coloured Glazed ceramic tiles size 350x450mm x 7mm thick edge cut on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over and including 10mm thick plaster on vertical surfaces in cement mortar (1:4) complete all as specified.

M&L for surface preparation of concrete surfaces of roof by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement.

M&L painting with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane complete all as specified.

M&L one coat of aluminium paint over APP Membrane all as specified and directed by Engineer -in - chage

M&L Aluminium Powder coated frame for holding of two track sliding shutter fixed type with aluminium section weighing 0.75 Kg/Mtr( composite weight of frame, track and beading ) incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etc and beading for fixing of galvanised wire wire mess complete all as specified

M&L Aluminium powder coated door/window shutter openable/ sliding type with aluminium section weighing 0.40 Kg/( composite weight of frame and beading ) Mtr incl. necessary joining, cleats, glazing clips, glass, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified Note: The quoted rate shall be deemed to be included 4.8mm plain sheet glass/ figured glass/ stainless wire mesh etc.

S&F 35mm thick 2nd class HW rail and style factory made plain, framed, panelled shutter (any numbers of panels ) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated supplied and fitted to chowkates complete all as specified.

S&F IInd class Hard Wood 35mm thick Factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.

S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified

S&F elegent mirror PVC cabinet of size 450mm x 555mm , Plastic Wall Mount Cabinet, complete all as specified

S&F Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-Parryware CAT PART NO T6903A1 or equivalent) , complete all as specified

S&F Soap dish brass CP (Make-Parryware CAT PART NO T6403A1 or equivalent) , complete all as specified

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified.

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified.

S&F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws (Make: Parryware Cat Part No. T6405A1 or equivalent) , complete all as specified

S&F bathroom Glass corner shelf with SS railing of best quality (as per sample available at AGE B/R office), complete all as specified

S&F white rimless Single piece-WC with UF soft close slim seat cover, Hinges, fixing accessories and accessories set and cistern fittings, S trap, incl all neccessories items complete all as specified. Make : Jaquar, CAT Part No OPS-WHT-15853S300UF or equivalent in other make as per Appx B complete all as specified

S&F Vitreous China wash hand basin oval/ designer white , size 640 x 515 x 210mm excluding CP waste coupling, excluding taps, waste chain & plug etc ( Make-PARRYWARE Titan C0436 (CTH) or equivalent), , complete all as specified

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Parryware CAT PART T3201A1 Light 9” or equivalent), complete all as specified

S&F stop valve 15mm, copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified.

S&F Stop valves 20 mm bore, . copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified.

S&F of CP health faucet with long chain for EWC including flexible pipe for 15 mmdia bore Cardiff with SS Hose & Hook (Brass) (Make: Parryware T9875A1 of equivalent), complete all as specified

M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap,, complete all as specified

M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore

20 mm bore

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 3 layer hoisted and fixed in position all as specified in SSR Part I - Capacity 1000 Litre complete as specified.

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified.

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish , complete all as specified

M&L CP cast copper alloy bib taps two way with wall flange and areator fancy tupe of 15mm bore (Make- Parryware CAT PART NO T5034A1 Uno Two Way Bib Cock or equilvalent), complete all as specified

S&F PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as specified.

M&L CP Fancy type centre hole basin mixer 15mm bore cast copper alloy (Make- Parryware PART NO Activa G5346A1 Tall Basin Mixer or equivalent), complete all as specified

M&L 15mm bore CP wall Mixer with flange & 115mm long bend pipe for over head shower flanges and crutch etc quarter turn (Make- Parryware Alpha G2716A1 Wall mixer 2-in-1 or equivalent), complete

M&L Towel ring of brass C P Square flange (Make-Parryware CAT PART No T6904A1 or equivalent), complete all as specified

M&L Chromium plated Overhead Rain shower with relvoling joint and 225 mm long shower arm with wall flange 15mm bore fancy type with arm (Make- Parryware CAT PART No T9814A1 Airmix Shower Head or equivalent), complete all as specified

M&L Chromium plated angle stop cock with wall flange fancy type cast copper ally 15mm bore any colour (Make- Parryware CAT PART No Alpha G2707A1 or equivalent), complete all as specified

S&F Stainless Steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete as specified.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position. , complete all as specified

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete.

S&F Aluminium, barrel tower bolts 150mm long of extruded section complete all as specified.

S&F Aluminium sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, . or extruded sections & fixing bolts & sliding bolts of extruded sections complete all as specified.

S&F Aluminium handles 125 mm size, . type, anodised complete all as specified.

S&F Aluminium body floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, 50mm thick finished even and smooth without using extra cement complete all as specified.

Supply only Water proofing treatment compound

M&L of Two coats of French Polish on Untreated wooden surface including Touch wood two coats etc, complete all as specified

M&L for Granite (of any type) work (table rubbed and polished) 20mm thick in flooring over & including 15mm thick screed bed (bedding layer) in CM 1:6, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of Granite including cutting and polishing (half granite polish as per local trade practice) complete all as specified.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified

M&L for point wiring using approved colour coding as per IS, with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade (ISI marked) in and including concealed rigid PVC conduit with accessories fixed on surface/ceiling by means of PVC sleeve/dash fasteners with cadmium plated screw and teakwood blocks closed recessed for mounting switch,sockets,regulators etc. including, Mild steel Sunken box, earth dolly with zinc coated and 3 mm thick phenolic laminated sheet top cover including 1.5 sqmm single core PVC insulated and unsheathed copper conductor FRLS cable 1100 V grade (ISI marked) earth continuty conductor to common earth and connected as continuous earth wire to earth dolly compiete all as sprcified and ditected for followings

One light/fan/ bell point controlled by one, one way switch

One 3 pin 5 Amp socket outlet on the same board with other switches

One 3 pin 5 Amp socket outlet on independent board with other switches

All as per item No 90 above but Point wiring with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly complete all as specified and directed.

S&F switch modular type type 230/250 volts ISI marked,complete all as speified and directed of following:-

Single pole , one way 5/6Amp rating

Single pole, One way 15/16 Amp rating

Supply and fix socket outlet multipurpose moduler type use on top cover(catered in point wiring above) as following:-

S & F Socket Outlet 230/250 Volts 2 in 1,3 pin 5/6 Amp Ratings

S & F Socket Outlet Piano type 230/250 Volts 2 in 1,3 pin 15/16 Amp Ratings

S&F Ceiling rose surface bakelite, 3 Phase/ PVC/ Polycarbonate isolated body (ISI marked) complete all as specified

S & F lamp holder angle type PVC/Polycarbonate type with cord grip cap insulated body with back plate for pendant fitting including 10 Watt LED Lamp complete all as specified and directed

Supply & fixing Energy saving environmental friendly, Trim Line LED Batten Tube Light fittings 18/20/22 Watt ,1200mm(4 feet) TL, long life, impact proof,surface/wall mounting IP20,100 Lm per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL & all as specified Make - CG cat Part No. LDL-20-CDL or equivalent model

Supply & fixing Energy saving environmental friendly, LED Batten Tube Light fittings 10/12 Watt ,600mm(2 feet) TL, long life, impact proof,surface/wall mounting IP20,100 luminaire per Watt, extruded Thermoplastic body with PC diffuser greater than 120 degree wide distribution available in 6500K CCT with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size complete including dismantling of old existing unserviceable fluorescent/LED TL & all as specified Make -CG cat Part No. LDL-10-CDL or equivalent model

Supply and Fix 10 Watt LED IP-65 Bulkhead environfriendly ultra modern energy saving surface mounted decorative hexagon bulkhead back lit LED luminaire comprising of high brightness LEDs wall mounted complete with all accessories pre wired twin core flexible copper conductor of suitable size. Make: CG cat PartNo. LBHP-10-CDL or Equivalent

S&F Energy efficient LED security lights of 60 Wattage of IP 66 with PDC Aluminium body and clear glass, LED lens for wide beam distribution with efficacy greater than 100 Lm/watt , 5700K CCT, pf more than .90 all as specified and directed by Engr-in-charge. (Note:- Bracket along with screw to fix on wall/surface duly painted by silver colour paint will be included in above quoted rate.) Make - CG Cat Part No. LSTS-60-CDL M or Equivalent

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 2 core 16 sq mm in trenches. complete all as specified and directed.

M&L for dry tibba sand for cushioning to PVC under ground cable with screened and washed sand punning down to provide a required cover all as directed. Note :- For the purpose of payment only punned thickness shall be measured.

M&L for brick for protection of PVC under ground cable with common burnt clay building bricks sub class B with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm and complete all as specified.

Supply and fixing steel tubing galvanised light grade for passing cable under road floors or fixing to poles for mechanical protection of under ground cable complete with flat iron clamps made of shape and 12 mm dia bolts nuts and washers fixing where required complete all as specified and directed of size 40 mm dia.

Supply and fix SP & N 8 ways factory made sheet distribution board double door protection class IP-42 double door type suitable for mounting MCB/MCCB conforming to IS 13032 IS- 8623 and BS 5484 with minimum 200 Amps bus bar complete all as specified. (Note: Cost of wall cutting for suitable mounting of DBs in recess alongwith proper connection with suitable lugs and making good disturbed surfaces with PCC work will be inclusive in above item quoted price.)

Supply and fix MCB 10 KA conforming to IS-8828 : 1996 : IEC-898 : 1995 rupturing capacity of the under mentioned type and rating:

SP 6 to 32 Amps rating

SPN DP 32 to 63 Amps rating

Supply and fix exhaust fan in metal body 300 mm in sweep, 220/240 Volts 1400 RPM with mounting ring and louvers including three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm from ceiling rose complete all as specified and directed.

M&L for earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0 mm thick, buried directly vertically in ground in a pit depth not less than 2.5 metres below ground level with top edge of earth plate at a depth not less then 1.8 metre below normal ground level connected to and including galvanised iron or steel earth wire 4 mm dia by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing wire shall be protected by galvanised iron or steel pipe 15 mm bore medium grade and connected to continuous earth wire on pole / test point to main board. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & directed as well as testing included. Note 1-: Following items deemed to be included in quoted rate. (a) Earth Electrode (b) Main earthing lead from earth electrode to test point and further to equipment to be earthed upto 7.5 metre (c) M&L for connecting earth electrode and earthing lead as specified (d) Adequate quantity of charcol dust and common salt as directed (e) All labour involved including testing of earth net work (f) Excavation and earth work or drilling hole for electrode (g) P.C.C pit and C.I cover (h) Funnel and watering pipe, wire mesh and copper lugs etc. as specified (j) G.I protection pipe of size ordered specified for protection of earthing lead from mechanical injury or tempering. (k) connected lead from test point to main switch or switch board or equipment to be earthed.

M & L for boring under road/drainage to pass GI pipe to protect under ground cable by automatic machine/manual complete all as specified and directed.

JAGDAMBA CONSTRUCTION COMPANY

Sh. Manoj Nagar

M/s Radhey Enterprises