REPAIR/ MAINTENANCE TO HT OVERHEAD/UG DISTRIBUTION SYSTEM, 11 KV LINE OF E/M SERVICES AND CONNECTED WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 m in depth in a hard soil for laying underground cables/ errection of steel tubular poles / stay pit etc all as directed by Engr-in-charge.

Material & Labour for spreading, levelling in layers n exc. 25 cm thick and ramming of sand cushioning to PVC/ XLPE cables with tibba sand and punning to provide required cover to UG cables. Note :- For the purpose of payment only punned thickness will be measured.

Supplying and laying un-reinforced precast concrete cable cover, class HVP, type 1 with peak, size 300mm x 180mm x 40mm

Returning, filling in incl spreading,levelling watering and well ramming in layer n exc .25 cm in soil each layer complete specified and directed by Engr-in-Charge.

Removing excavated surplus material to a distance n.exc 50 m and depostimg where directed at alevel n exc. 1.5 m above the starting point in any type of soil complete all as specified and directed by Engr-in-Charge.

Supply, laying and testing electric under ground XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sqmm 3 Core in trenches, ducts, pipe on walls, poles all as directed by Engr-in-charge.

Supply and fixing inreplacement of tinned copper drop out fuse suitable for HT 11 KV line of sizes 10 Amps to 20 Amps.

Supply and fixing inreplacement of tinned copper drop out fuse suitable for HT 11 KV line of sizes 30 Amps.

Supply and fixing inreplacement of tinned copper drop out fuse suitable for HT 11 KV line of sizes 40 Amps.

Supply and fixing inrreplacement of tinned copper drop out fuse suitable for HT 11 KV line of sizes 60 Amps.

Taking down old unsv and supply & fixing cable jointing kit for 11 KV (Eartherd) grade cable for outdoor termination heat shrink type joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm.

Taking down old Unsv and supply and fixing Cable jointing kit for 11 KV (Eartherd) grade cable joint, heat shrink type straight through joint complete with jointing material and accssories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sq mm.

Supply & fixing in replacement of light grade galvanised iron tubes 100 mm dia at two/four pole structure or laid in trenches including cutting bending and necessary fittings like socket, union, elbow, bend, Tee ect as required at site fix on wall or complete for cable protection or as directed by Engr-in-Charge.

Material & Labour for Cable route marker made out of GI non corrosion of size 150mm x 150mm x 5mm of plate and suitable height at least 2 feet from ground after grouting into the ground including writing the HT/LT Cable by engraqvinging/ painting complete fixed in PCC including excavation and RF and removing complete all as directed by Engr in Charge

Material & Labour for cold mix emulsion granules road patching material in making good of road 40mm thick. (Make : Bedroak chem / Infra LLP or eq).

M/s SUNIL ENTERPRISES