Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.5 LAccepted-AOC | L1 | Accepted-AOC AOC DUE TO L1 BIDDER | |
| 2 | L2₹51.3 L+₹2.0 L (4.12%)Rejected-Finance | L2 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 3 | L3₹51.5 L+₹2.3 L (4.70%)Rejected-Finance P O P S THRIZINO WEST KAMENG A P PIN 790 002 | WEST KAMENG | ARUNACHAL PRADESH | 790002 | L3 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 4 | L4₹52.3 L+₹3.1 L (6.26%)Rejected-Finance | L4 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE | |
| 5 | L5₹52.5 L+₹3.3 L (6.60%)Rejected-Finance | L5 | Rejected-Finance BIDDER REJECTED DUE TO HIGHER BID VALUE |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
6 Sept 2024, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
MOHAN SINGH YADAV, IDSE
GE TENGA PIN-900694 C/O 99 APO
PROVISION OF DRAINAGE AND SPECIAL REPAIR/ REPLACEMENT TO HOUSE BLDG NO CH28 CH29 241 CGI SHEET DOOR SHELTER NO T188 T189 T198 OFFRS SINGLE LIVING ACCN) AND T80 OFFRS MESS KITCHEN ALONG WITH SEEWAGE LINE AND SEPTIC TANK OF FD HOSP OF AGE B/R AND AGE
2024_MES_667805_1
8629/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
PL REFER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹0
₹95,000
Yes
7 Oct 2024
25 Jul 2024
7 Sept 2024
25 Jul 2024
6 Sept 2024
8 Aug 2024
Amount
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in hard/ dense soil.
Excavation in trenches in any type of soil not exc 1.5 mtrs wide and not exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out soft & loose soil complete all as specified and as directed.
Returning fitting in any type of soil including spreading leveling watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.
Removing excavated soils to a distance n.exc. 50 mtr and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.
M & L PCC 1:4:8 type D2( using 40mm graded aggregate ) as in foundation filling and mass concrete etc.
M&L PCC 1:3:6 type C2, (using 40mm graded stone aggregate) as in surface channels and drains.
Extra for forming fair finishing drain or chnnels 30cn inner girth in cement concrete using extra cement including forms,moulds stopped ends etc. complete all as specified and directed.
M&L for pre cast re-inforced cement concrete 1:2:4 type B-1 as in cover slab for man hole and similar article with plain face set in Set in CM 1:4.
M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips.
M&L for MS TMT bars 6mm to 8mm dia, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
M&L for Formwork to soffits of suspended slabs such as roof slab, floor slab, landing and similar work n exc 200 mm thick for rough finish flat surface of concrete.
Dismantling of plain or corrugated steel sheeting any gauge, thickness as in roof covering complete all as specified and directed
Supply and fix, 0.63 mm thick corrugated galvanised mild steel sheeting (minimum 275gm/sqm galvanising) with two corrugations side lap, fixed with L type or J type or cranked hooks , bolts and washer in roof, complete, all as specified and directed.
Supply and fix plain galvanised mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing of 0.80mm thickness (minimum 275gm/sqm galvanising) complete all as specified and directed.
S&F Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
S&F for Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed.
M&L for preparing and applying two coat of synthetic enamel over a over a coat of red oxide primer on new zinc (or galvanised ) surfaces to receive painting, by coating with mordant solution including washing and cleaning etc. of any description, not otherwise described, over 10 cm width or girth.
Material and labour for preparation of new plywood and wood based material surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint as specified
Material and labour for preparation of old surface of wood and wood based materials over 10 Cm width or girth and applying one coat of synthetic enamel paint as directed and specified.
Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.50 Sqm but n exc 4.0 Sqm each including iron mongeries complete all as specified and directed.
Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete, all as specified and directed
S&F 2nd class hard wood 30mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats
Taking down chowkats or frames with shutter (without taking off shutter from the frame) n.exc 1.50 Sqm each including iron mongeries complete all as specified and directed.
S&F 2nd class hard wood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats windows,ventilators, etc. are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)
Supply and fix MS butt hinges medium weight, cold rolled 125mm size complete all as specified and directed.
Supply and fix MS butt hinges medium weight, cold rolled 100mm size complete all as specified and directed.
Supply and fix MS butt hinges medium weight, cold rolled 75 mm size complete all as specified and directed.
Supply & fix Aluminium anodised barrel tower bolt 150 mm long of extruded section etc complete all as specified and directed.
S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed
Supply & fix Extruded Aluminium anodised alloy handles cast type 150mm long complete all as specified and directed.
Supply & fix Extruded Aluminium anodised alloy handles cast type 100 mm long complete all as specified and directed.
Supply & fix aluminium alloy, anodised, sliding door bolts 250mm size with hasp, staple (bolt type) and fixing clips of sheets , cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc complete all as specified and directed.
S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed
S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane.(Make: Trivani/Modi Float/Gold Fish)
Supply & fix sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed.
Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removing rubbish off the premises complete all as specified and directed.
Demolition of cement Concrete(Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed by engr in charge
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for.
M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement
M&L for 40 mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase complete all specified and directed by engr in charge.
M&L for screed bed or bedding layer of 15mm thick in cement mortar 1:4 for laying floor tiles etc all as specified.
M&L for 15 mm thick screed bed in CM 1:6 for laying floor tiles.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
Demolition Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast block walling built in cement mortar
M&L PCC 1:3:6 type C1 as in block masonry with solid blocks exc 10 cm in width and set in CM 1:6. complete all specified and directed.
M&L rendering 15mm thick in CM 1:4 on concrete outer surfaces of wall finished even and smooth without using extra cement . complate all specified and directed
M&L for Prepairing undecorated newly plastered or unplastered surfaces and applying two coats of cement base paint over one coat of white wash as complate all specified and directed
M&L rendering 15mm thick in CM 1:6 on concrete innerr surfaces finished even and smooth without using extra cement .
M&L for Prepairing newly plastered or unplastered surfaces and applying three coats of white wash complete all as specifeid and directed
M&L for 10mm thick Rendering wih CM 1:4 on fair faces of brick work or concrete surfaces to fix the tiles complete all speciffied and directed
M&L, glazed ceramic coloured tiles joint free of size 350x 250x 7mm/ 450X 350X 7mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles, complete all as specified and as directed.
Dismantling wall and ceiling boards of any description including cover fillets complete all as specified and directed.
Supply and fixed 6 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
Supply and fixed 4 mm thick plywood , graded BWR, type BB fixed with nails to timber frame work fixed to ceiling surface etc complete all as specified and directed.
Material & labour for 2nd class hard wood plain fillets, square, rectangular or triangular in section, wrought, secured with nails having sectional area exc. 3 sqcm and n.exc 6 sqcm, complete all as specified and directed
Dismantling Timber scantling 40 sq cm and over in section , in any position all as specified and directed.
M& L for cleansawn Second class hard-wood scantlings with framed work.complete all specified and directed
M&L for 75mm thick PCC 1:3:6 type C1 using 40 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement
S & F in repair Vitreous China Wash Down Water Closet Pan (Pedestal Pattern, white) excluding Fixing Boards, Flushing Cistern and Flush pipe all as specified and directed.
S & F in repairs EWC seat Cover for Pedestral pan all as specified and directed.
S & F in repair 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete.
S&F PVC connection 15mm size with PTMT nuts, of 600mm length all as specified and directed.
S&F vitreous china wash hand basin in repairs white of size 550X400mm flat back excluding taps, waste, chain and plug but including brackets including cutting for and pinning in ends of brackets or erecting.
S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia
S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl Jointing with solvent cement.
S&F waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including 32mm PVC waste pipe for WHB complete.
S&F in repairs bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore.
S&F in repair 15 mm dia bib taps, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed.
S&F in repairs stop valve, fancy type, chromium plated of brass with long shank and cup, concealed type, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of 15mm bore.
S&F in repair 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred "Hot ot Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
Material and labour for 20mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all specified and directed
M&L for red colour pigment chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement no pigment complete all specified and directed
S&F PVC (SWR) pipes 110mm dia single sockted in any length with rubber ring joints laid in trenches or floors. complate all specified and directed
M&L cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 110 mm bore pipe complete all as specified and directed
S&F PVC (SWR) bends any radius with access door, 110mm dia.complate all specified and directed
S&F PVC (SWR) bends any radius with access door, 75mm dia. complate all specified and directed
S&F PVC (SWR) junction single, (Single T) equal or unequal of dia110mm. complate all specified and directed
S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints laid in trenches or floors.complate all specified and directed
Taking up or down 15 mm bore steel water tubing and connections including clfor refixing or removal to store
Taking up or down 20 mm bore steel water tubing and connections including clfor refixing or removal to store
S&F in 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed
S&F in 20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches complate all specified and directed
M&L for machine cut kota stone slab flooring 20-25 thk over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete
Dismantling ,floor hearth or wall tiling including cement mortar bedding (but not backing), hacking for key, scrubbing down with water etc.
M&L for form work to chullah hoods,chajjas,troughs and similar items including edges with fair finish flat surfaces
M&L for reinforced cement concrete (nominal Mix) 1;2;4 type B1 (using 20 mm graded stone aggregate) for slabs supported on walls , beams and columns, in floors , roofs, landings and in shelves ,chhajja's and the like complete with all necessary formwork etc all as specified and as directed.
Demolition of stone slabs or tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons etc
M&L for 18 to 20 mm thick marble work (table rubbed and polished) in steps and cooking platform and like in cm (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of any shade
M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4
M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement
Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.
S & F PVC water storage tanks of 500 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified
S & F in repair ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified
S&F in repair stainless made of stainless steel 1.00 mm thick kitchen sink with plug washers, wastes;including bedding in cement mortor on dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 x 420 mm with bowl size 410 x 330 x 160mm, complete.
Material and labour for prelaminated particle board 18/19 mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in shutters for kitchen shelves/cupboards fixed in repairs.
S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed.
S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors
S & F GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.
Dismantling boarding,any description,fixed in any position with nails
M & L for 50 mm thick II nd class Hard wood clean sawn boarding with butt joints fixed with nails in any situation.
S&F Kitchen Cabinet with modular sliding racks/drawers including necessary fittings,to be fixed complete all as specified and as directed.
S&F 40 mm dia cupboards nobs fixed with nuts screws and mild steel bright finished complete all as specified and directed.
Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.
Preparing newly plastered surfaces of walls and applyinf three coats of white wash
S&F in repair soap dish,any type,fixed to plugs with chromium plated brass screws.
S&F in repair CP towel rail 450mm long,fixed with to plugs with chromium plated brass screws.
Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.
All as per item No. 112 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size
All as per item No. 112 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.
All as per item No. 112 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
All as per item No. 112 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 4 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.
S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type
S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type
Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden board complete all as specified and directed.
S&F LED lamp 9 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha 0.85 (min). Make- Havells/Crompton/Syska
Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.
S&F of new generation energy saving and environmental friendly long life LED building security light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 25 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed.
S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed.
Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.
S&F MCB SPN having braking capacity 10KA, 35 to 60 Amps, 240 V C Curve complete all as specified and directed.
S&F MCB SPN having braking capacity 10KA, 32 Amps, C Curve 240 V complete all as specified and directed.
S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V C Curve complete all as specified and directed.
S&F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, (White/Warm White) 220 V AC recessed/surface mounting type with high efficiency PMMA diffuser soft glare free light of colour white/warm white as per requirement at sitecomplete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge.
S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc
S & F , cable XLPE insulated PVC bedded 1100 Volts grade heavy duty cable with PVC solid insulated multistranded aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 16 sqmm 4 core section complete all as specified and directed.
Supply and laying Double wall corrugated HDPE duct pipe 50mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge.
Supply and laying galvanised tube light grade ISI marked of size 40 mm dia incl all fittings in trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed.
Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)
Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.
Taking down service wire connection wiring of any type and size and discription incl removal from DBs etc and removal of the same from site and making good the disturb surfaces or portion of wall/ceiling etc complete all as specified and directed by EIC.
Taking down of UG cable from trenches any size /type for replacing etc all as specified & directed.
M/S Karkies Construction & Co. (BID ID -3087988)
M/S KUNKAPU ENTERPRISES (BID ID -3088197)
M/S RARAI ENTERPRISES (BID ID -3088208)
M/S R.N ENTERPRISE (BID ID -3088102)
M/S ASHOK CONSTRUCTION (BID ID -3087936)
M/S SUNRISE CONSTRUCTION AND CO (BID ID -3088221)
Sikha Traders (BID ID -3088211)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .