Restoration of Shikhara, Chajja and remaining work of Dome of Pipaji Temple at Todaraisingh, Distt. Tonk

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Provision for careful removal/taking out of trial assembled sikhra portion at ground level and out of plumb/ hanging / disturbed / stone members from Shikhara Portion very slowley by manually using appropriate techniques i.e Derrik pole with chain pully including stacking them properly and numbering them etc very carefully to avoid any mishappening and without causing any damage to the stone members etc complete.

Procurement of fly Ash AAC block size (24"x 8"x 8" and 7" x 7" x 7") for using in place of missing architectural fragment during the period of trial assembling and to assess the quantum of missing temple architectural members.

Procurement of new (hand chiseled surface on both upper and lower side) sand stone block for masonry work inner core of sikhra portion. Special size of stone blocks are 0.50 x 0.40 x 0.30 / 2.00 x 0.30 x 0.30 / 3.00 x 0.60 x 0.10 from Bijoliya quarry. Supply size and quantity as per guidling given by site in charge.

Inner core circular masonry on the top of Garbhgraha of Shikhara portion by using coursed rubble with special size of stone blocks are 0.50 x 0.40 x 0.30 / 2.00 x 0.30 x 0.30 / 3.00 x 0.60 x 0.10 stone block with lime mortar (1 lime : 1 C. Sand:1 Surkhi) and cutting & dressing first sort as per requirement of site condition.

Provision for searching out veneering stone from dumped/mixed heavy architectural members and lifting with chain pully and stacking over wooden plank.

Procurement of new marble stone (Sanwar quarry) for Shikhara portion, chajja stone small kanguras as per available pattern including transportation from Sanwar quarry to Gangsaw for cutting the stones (size according to site in-charge) and transportation from gangsaw to working site inside the premises including loading unloading by using crane.

Provision for cutting/ chiseling and draw geometrical design / carved pattern on new marble stones as per matching the original pattern etc complete.

Provision of carefully mending the cracked/broken/missing heavy stone block by appropriate techniques using stainless steel pin/dowels/clamp with epoxy solution mixed with stone dust of same stone including drilling hole, cutting channel finishing etc. complete.