82/2024-25

Amount

Safe loading, carriage including unloading and proper stacking of following materials from Central Store Barabanki / JE Store to site of work.

ST Pole 13 Meter Long

ST Pole 11 Meter Long

Top Channel 11 kv

11 kv ACSR Rabbit Conductor

11kv Pin Insulator .

11kv Polymer Disc Insulator.

Stay Set Complete

250 kvaTransformer

Earthing Set

Cable Al. XLPE 3x185 sqmm. For 11 KV

11 KV Cable Outdoor Jointing Kit

11Kv X-arm

Outgoing VCB 200/100/5A

3x185 sqmm. 11 kv XLPE S.T.

LT XLPE Cable 1x400 sqmm.

LT XLPE Cable 3.5x240 sqmm.

LT Cable 4x2.5 sqmm.

Dragging of pole from JE Dump Store to site

Grouting of ST Pole

Errection of Substation type double pole with PCC Pole 8.5 Mtr. Long including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM.

Errection of single PCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm.

Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor)

Mounting of 250 KVA Tranformer

Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle and stay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting.

Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department).

Earthing of pole with MS Earthing.

Hosting of Cable

Installation of 11Kv Outgoing VCB

Fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc.

Laying of 11 KV 3x185 sqmm XLPE Cable (Overhead, Trench & Drilling method). (XLPE Cable will be provided by the department)

Laying of LT XLPE Cable 1x400+3.5x240+4x2.5 sqmm (XLPE Cable will be provided by the department)

Provinding & Fixing of various type materials. All materials shall be supplied by the contractor.

PG Clamp for Rabbit Conductor

LT Clamp with sackle Insulator

LT Clamp For PCC/STP Pole

GI Pipe 6" DIA

11 Kv TPMO With Polymer Pin Insulator

ALLUG 240 Sqmm

11 Kv F-Clamp

Nut & Bolt

Cross Bressing Set

11 KV DO Fuse set

LT Pilfer Protection System

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angle the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mess. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with MS flat of size 25x3mm to support as per RESPO specification & direction of E/I

Construction of T/F Plinth of size 2x2x1.5 mtr with first class brick and Massionary work in the ratio 1:4 cement and core sand with RCC top 20 mm 1:2:2 cement sand & core sand stone grit with 20 Mm MS bar and MS Channel for resting of T/F.

Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5" dia (40 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor.

Hindustan Electric Work (BID ID -4851005)

M/S VISHWAATH CONSTRUCTION (BID ID -4853022)