Provn of wire mesh door and box type steel window in OTM Accn under AGE B/R-I at Tibri Mil Stn Gurdaspur.

Amount

Taking down chowkats with shutter exc 1.50 Sqm but n exc 4.00 sqm each (without taking off shutter for the chowkats) complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock, strike plate etc complete of size 125x60mm complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebate including necessary fixing lugs, hings, lock, strike plate etc complete of size 105x60mm complete all as specified and directed.

S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels on both side complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in back filling of chowkhats/ steel frame complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tack/ wooden beads or galvanised wire staples complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.50 Sqm each complete all as specified and directed.

M&L for preparation of newly wooden surface exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs, including roller and roller plate joint through welding/bolt in metal/wooden frame to be carried out or necessary alternative arrangements to be done complete all as specified and directed.

S&F aluminium anodized barel tower bolt of extruded section 150mm long ISI marked complete all as specified and directed.

S&F aluminium alloyed handle fabricated type anodized of size 150 mm long ISI marked complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door 300 mm long ISI marked bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

M&L for rendering 15 mm thick with ready mix mortar on brick or concrete surfaces of walls, finished surface even and fair using WPC upto height 12 mtr including taking down cement plaster of any description complete all as specified and as directed. (Note :- WPC shall be measured and paid for separately).

Supply only liquid water proofing compound.

M&L for rendering 12mm thick with ready mix mortar on brick or concrete surfaces of walls, finished surface even and smooth without using extra cement including taking down cement plaster of any description complete all as specified and as directed.

M&L for preparation of newly plastered surface and applying two coats of cement base paint over a coat of primer on wall surface complete all as specified and directed.

M&L for preparation of newly plastered surface and applying two coats of Oil bound distemper on wall over a coat of wall care putty and chalk whiteing primer on plastered surface wall complete all as specified and directed.

S&F steel window/ ventilator box type made of ERW tube hollow P section of size 60mmX25mm outer frame (single rebated) comprising glazed skelton shutter frame of ERW tube P section including MS guard bars, fittings and fixtures welded to frame/ shutters all as shown on drg No. CEJZ/ TD-1019/08 Sh 1/3 to 3/3 including making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts, painting with one shop coat of zinc chromate primer incl two coat of painting incl taking down old existing window/ ventilator complete all as specified and directed. (Note: Glass/ wire cloth shall be measured and paid for separately).

S&F steel window box type made of ERW tube hollow P section of size 60mmX25mm double rebated outer frame comprising double shutters i.e. guaged skelton & glazed, shutter frame of ERW tube P section size 50mmX20mm with two openable leaf for each shutter consisting two Nos sash bar of T-section 20mmX3mm welded to frame with one vertical mullion of ERW box type T-section of size 60mmX25mm and FI, 2mm thick welded/ screwed to frame for fixing of wire gauge including MS guard bars, fittings and fixtures welded to frame/ shutters as given below and all as shown on drg No. CEJZ/TD-1020/08 Sh 1/3 to 3/3 complete incl two coats of painting incl taking down old existing window :- (i) Hold fast,150mm long of flat iron 12mmX3mm- 04Nos per window (ii) Handle of Z section 20mmX25mm,100mm long-01Nos per leaf (iii) MS Tower bolt 150mm long-02 Nos per leaf (iv) Z section 20mmX25mm,100mm long stopper -01 Nos per leaf (v) Cleat 55mm long of hollow square 15mmX12mm -02 Nos per leaf (vi) MS pintol hinges size 75mmx12mm- 2 Nos. per leaf (vii) Making good dismantled portion in PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) for hold fasts (four Nos for each window). (viii) Painting with one shop coat of zinc chromate primer. (Note: Wire cloth, glass shall be measured and paid for separately).

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars and precast concrete masonry etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick, old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as spcified and directed.

M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spcified and directed.

M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit Rs. 1,31,910/- from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

PK CONSULTANT (BID ID -3468263)