SPECIAL REPAIRS TO MD ACCN BLDG NO P-183 AT MES COMPLEX AT BRICHGUNJ MILITARY STATION

Amount

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-charge

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge

S&F pre-painted galvalume aluminium zinc coating GI baesd plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-charge

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and as directed by Engineer-in-charge

S&F second class hard wood weather boarding 20mm thick plained one side with butt joints as in eaves board complete all as specified and as directed by Engineer-in-charge

M&L for preparation of new or previously untreatead wood and wood based surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed by Engineer-in-charge

Dismantling mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-charge

S&F Roof trusses (framed), trussed, purlins, trusses gantries, rails and fastenings and heavy bracket framing (beam,tee,angle,channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-charge

M&L for painting two coats of synthetic enamel paint over one coat of red oxide including preparation to new or previously untreated steel and surfaces of any description, not otherwise described, over10 cm width or grith all as specified and directed.

M&L for painting one coat of synthetic enamel paint including preparation to previously treated old steel surfaces of any description, not otherwise described, over 10 cm width or grith all as specified and directed.

M&L for preparation new Steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer, complete all as specified and as directed by Engineer-in-charge

Dismantling of ceiling boards of any description and any thickness, fixed in any position including frame work if any , complete all as specified and as directed by Engineer-in-Charge.

M&L for false ceiling with aluminium grid work (size of grid 600x600mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 2mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long, means of ceiling cleats made out of GI Flat 40 X 3mm 60mm long and expansion holdfasteners 12.5mm dia 40mm long complete all as specified and as directed by Engineer-in-Charge.

M & L for Eco false ceiling boards, ordinary type of thickness 4mm and fixed to frame work with screws/nails etc complete all as specified and as directed by Engr-in-charge.Fixing only serviceable Eco flase ceiling boards obtained from dismantling, to frame work with screw/nails etc, incl painting with one coat of OBD complete all as specified and as directed by Engineering in charge. Note. Serviceable

M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (ii) Laying APP membrane weighing 3to 4Kg/sqm, with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iii) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane.

M&L for rendering 10mm thick in CM (1:4) mixed with water proofing compound on roof slaband finishing the surface even and smooth without using extra cement, complete all as specificed and as directed by Engineering in charge. (Note : Supply only WPC shall be measured & paid separately)

Taking up or down 15mm dia bore steel tubing galvanised and connections complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing galvanised and connections complete all as specified and directed.

S & F 15mm dia bore unplasticised PVC pipes of pressure rating 10kgf/cm with all fittings and fixed complete to walls and ceilings or laid in floor etc complete all as specified and directed.

All as per item no 19.00 herein before but 20mm.

S & F in repairs fancy type, Pillar taps , cast copper alloy , with capstan heads , chromium plated , screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm and fixed in repairs, complete all as specified and as directed by Engineer-in-charge

S&F in repair vitreous china wash hand basin white flat back size 630x450mm incl brackets, CP coupling, 32 mm GI pipe waste pipe complete all as specified and as directed by Engineer-in-charge

S & F in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc, complete all as specified and as directed by Engineer-in-Charge.

S & F stainless steel, plate rack of size 750 x 780mm with all fittings as per sample kept in GE's office and as directd by Engineer - in - Charge.

S&F in repair 20mm dia Gun metal globe or gate valve with iron wheel head, screwed both end for iron pipe complete all as specified and as directed by Engineer-in-charge

S&F for 25mm dia ball brass valves, high pressure, with polythen float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed by Engineer-in-charge.

S & F in repairs angular stop cock, cast copper alloy chromium plated, 15 mm dia screwed down high pressure, with long screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs shower rose cast copper alloy chromium plated, of size 125mm all as specified and directed.

S & F Bib tap cast copper alloy chromium plated, 15 mm dia with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.

S&F PVC connection both end brass union 15 mm dia & check nuts of length 450 mm long complete all as specified and as directed by Engineer-in-charge

S & F vitreous china squatting pan, Orissa pattern size 630X450 mm white with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc complete all as directed.

S & F PVC flushing cistern 10 litres capacity syphonic action type, low level, white with inlet, ball valve, float, handle and flush pipe, etc complete all as specified and directed.

M&L for cast iron floor trap,75mm oter dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-charge

M&L for cast iron Nahani trap,75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-charge

Dismantling of CI drain pipes,50-100 mm dia jointed in cement mortar complete all as specified and as directed by Engineer-in-charge

M&L for 100mm bore sand cast iron pipe,, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall incl testing of pipe etc complete all as specified and directed by Engr-in-Charge

All as per item no 37.00 herein before but 75mm bore of pipe all as specified and directed.

Supply only CI bends bore of pipe 100mm with oval access doors all as specified and directed.

Supply only CI bends bore of pipe 75mm with oval access doors all as specified and directed.

Supply only 100mm dia CI pipe single/Tee branch pieces(Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed.

All as per item no 41.00 herein before but 75mm bore of pipe all as specified and directed.

S&F aluminium anodises tubular towel rail 20mm dia complete all as specified

Supply only 100mm dia CI pipe double branch pieces singly (Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed.

Supply only CI Cowls 100mm bore of pipe all as specified and directed.

Disconnecting of existing tank of any capacity and setting aside or lowering if required for repairs cleaning etc and refixing in position hoisting and connecting , complete all as specified and as directed by Engineer -in-Charge.

M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 80 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete all as specified and as directed by Engineer-in-charge

M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge.

M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces all as specified and directed by Engr-in-Charge to surfaces of columns, beams and similar structural members complete all as specified and as directed by Engineer-in-charge

M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface complete all as specified and as directed by Engineer-in-Charge.

M&L for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc.

M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 30 mm from floor/roof slab/chajjas and similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles including necessary scaffolding etc and removal of debris to a distance not exceeding 50m, complete all as specificed and as per directed by Engineer-in-Charge.

M&L for application of high build polymer cement sand mortar 1:3 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBR to 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing over a coat of interior/exterior grade wall care putty to match with the existing complete all as specified and as directed by Engineer-in-Charge. [ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck]

M&L for drilling holes in slabs/wall/column/beams for anchor steel reinforcement incl washing with water, inserting lock set 'P' in the holes and all as specified and directed by Eng-in- Charge.Make : Lock set "P" of Fosroc.

M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed by Engineer-in-charge

Mild steel TMT bars 5mm dia. and over upto & including 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups binders and spacers complete all as specified and as directed by Engineer-in-charge

Demolition of RCC in chajja including cutting reinforcement etc., all as specified and as directed.

M&L fair finished flat Form work to RCC Chajjas,fins facia, parapets and similar items including edges complete all as specified and as directed by Engineer-in-charge

M & L for RCC M-30 including chajja, fins, facia, etc., all as specified and as directed by Engineer-in-Charge.

M&L extra for drip mould 40mm x 10mm and similar work not exc 15cm width for RCC chajjas etc complete all as specified and as directed by Engineer-in-charge

M&L Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in roof kerbs, mud stops or chamfered on edges complete all as specified and as directed by Engineer-in-charge

M&L for coloured non skid ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 15 mm thick in CM 1:4 complete all as specified and directed.

M & L for machine cut kota stone slab 20 to 25mm thick in treads of steps in stair laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and mirror polishing laid over cement screed bed in cement mortar 1:4, 20mm thick, complete all as directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-charge

S & F coloured joint free non Skid ceramic tiles 7 to 8mm thick (square) area of each tile exceeding 0.06 but not exceeding 0.11 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified and directed.

S & F coloured joint free ceramic tiles 10mm thick (square) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set, jointed and pointed in white or coloured cement to match over screed bed in cement mortar 1:4, 15 mm thick, all as specified and directed.

S & F coloured glazed ceramic tiles 300mm x 200mm x 5.50 to 6mm thick on vertical surfaces such as skirting & dados etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces etc including backing coat in cement mortar 1:3, 10 mm thick, complete all as specified and directed.

M & L for machine cut kota stone slab 20 to 25mm thick in rise/steps, skirting, dado and pillar laid and jointed with white cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing laid over cement screed bed in cement mortar 1:3, 10mm thick,incl taking down existing cement plaster of risers complete all as specified and as directed.

M & L for granite slab 20 mm thick as in cooking platforms, bedded 15mm thick ,in cement mortor 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing, including Roughning existing surfaces of old concerete surfaces by picking, sweeping clean and washing down with water to remove dust etc and rubish off the premises and Brushing neat cement slurry with 3 kg of cement per Sqm complete all as specified and as directed by Engineer-in-charge

Demolition of cement concrete of any description and in any position incl floor tiles etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 15mm thick rendering in CM 1:3 on fair faces of brick or concrete surfaces, finished even and fair using water proofing compound all as per manufacturers instructions etc, complete all as specified and as directed by Engineer-in-Charge (Note : WPC shall be measured and paid separately under relevant item)

M&L for PCC 1:5:10 type E2 (using 40mm graded aggregates) for filling and mass concrete, complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring, 25mm thick, finished the surface fair and even all as specified and as directed

M&L for applying for a evenly tack coat of industrial bitumen 85/25 at the rate of 1.2 kg/sqm including cleaning surfaces complete all as specified and as directed by Engineer-in-charge

Supply only intergral water proofing compound

Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) all as specified and as directed

All as per item no 76.00 herein before but are exc 1.5 Sqm but n.exc 4.00 Sqm

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S&F 2nd class hard wood 35 mm thick, plain, framed, panelled shutter ( any number of panels) with panels of timber flat on both sides ( feather edged), or of veneered particle board medium density, wood particle borard with commercial face veneers, the sizes of members of shutters shall be specified and as directed by Engineer-in-Charge

S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebatyed and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge

Taking down shutters of any description exc 1 Sqm and n exc 2 sqm each and refixing in same opening including taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. complete all as specified and as directed by Engineer-in-charge

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and as per drawings.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having at PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for powder coated aluminium sections in doors/windows/ventilator including necessary joining cleats, glazing clips, rubber neoprene packing anodised aluminium snap beading, screws, handles 2 Nos in shutters, hinges, hook and eyes, anodised aluminium fittings etc complete of standard sections all as specified and directed (Aluminium section shall be of make Jindal/Hindalco/Indalco) Note :- Weight of aluminium sections for frames and shutters shall only be considered for measurement for payment. However, cost of other consumables given in the items shall be deemed to be included in the rate quoted. Glass panels, aluminium grill and aluminium wire mesh as applicable will be measured and paid separately as supplied only.

Supply only aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge.

Supply and fix aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge.

Supply and fix in repairs aluminium alloy wire mesh 0.45 nominal dia of wire and average width of aperture 1.40mm fixed with aluminium wire staples complete all as directed by Engineer-in-Charge.

Supply only 4 mm thick sheet glass ordinary quality and glazing in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge

Supply only 3 mm thick Figured glass' pin headed type and glazing in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed by Engineer-in-charge

M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for one coat of synthetic enamel paint on old painted wood/wood based surfaces exceeding 10 cm width or girth including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed by Engineer-in-charge

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engineer-in-charge

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 100mm Size complete all as specified and as directed by Engineer-in-charge

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodisedcomplete all as specified and as directed by Engineer-in-charge

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge

PCC 1:2:4 type C-1 using 20mm graded crushed stone aggregate as in hold fast blocks including necessary form work ccomplete all as specified and as directed by Engineer-in-charge

S & F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in cupboard, complete all as specified and directed by Engineer-in-Charge.

S & F Hasp and staple 100mm size, safety type, Alluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-charge

S & F 100 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-charge

S&F Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type C-21 75mm Size complete all as specified and as directed by Engineer-in-charge

M&L Mild steel work as in band straps, supports or stays for rain water ,ventilating pipes, including bolts, if required; clamps , wall tie, hooks , angle cleats ,hold fast etc and similar small articles conforming to Fe 410-O or FE 310-O , all as specified and as directed by Engr-in- Charge.

S&F in repairs 20mm dia aluminium anodised curtain rod with brackets, fixed to pelmet box/wall etc complete all as specified and directed.

S & F in repairs 18/19mm thick prelaminated particle board, exterior grade, prelaminated on both sides with decorative choice lamination fixed with beeding as in pelmet box, complete all as specified and directed by Engineer-in-Charge.

Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-charge

M&L rendering 5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6 on external surfaces of block masontry even and smooth eithout using extra cement complete all as specified and as directed by Engineer-in-charge

Supply only Integral water proofing compound

M&L for rendering 5 mm thick in CM 1:3 finished even and smooth without using extra cement on ceiling including cement slurry 3 kg/sqm complete all as specified and as directed by Engineer-in-charge

M & L for two coats of OBD over a coat of primer and over a coat of interior grade wall care putty on newly plastered surfaces of walls including nesessary preparation of surfaces all as specified and directed.

M& L for two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer over a coat of exterior grade wall care putty including preperation of new wall surfaces etc complete all as specified and as directed.(Make Apex Ultima)

M & L for two coats of OBD over a coat of primer over a coat of interior grade wall care putty on newly plastered surfaces of ceiling including nesessary preparation of surfaces all as specified and directed.

M & L for preparing old decorated surfaces of ceiling by complete removal of existing treatment and applying two coats of OBD over a coat of primer over a coat of wall care putty all as specified and directed.

M & L for two coats of OBD over a coat of primer on old plastered surfaces of walls including nesessary preparation of surfaces by complete removal of existing treatment all as specified and directed.

M& L for two coats of weather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces over a coat of primer including complete removal of existing treatment of any description complete all as specified and directed. (Make Apex Ultima)

M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.

M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.

Material & labour for chequred cement concrete tiles of size 30 cm x 30 cm x 25 mm with size of chips up to 12 mm jointed and pointed in neat cement slurry with grey cement and pigment to match the shade including screed bed 20mm in CM (1:6) all as specified and directed.

Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, regulators, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: - (a) One light point/bell point controlled by one switch

(b) One fan point controlled by one switch and one regulator

(c) One 3 pin switch socket outlet point 5 amps on same board with other switches.

(d) One 3 pin switch socket outlet point 5 amps on independent board.

All as per item at sl No.121 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix switch piano flush type single pole one way 5 amps, complete all as specified and as directed by Engineer-in-Charge

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush/box type, complete all as specified and as dircted by Engineer-in-Charge

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix lamp holder(angle type) PVC body with back plate suitable for batten fittings, complete all as specified and as directed Engineer-in-Charge

Supply and fix bell push single phase, 240 Volts, 50 Hz, complete all as specified and as directed by Engineer-In-Charge.

Supply and fix bell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge.

Supply and fix fan speed regulator, electronic suitable for single phase AC, 240 volts, 50 Hz,100 watts, complete all as specified and as directed by Engineer-in-Charge

Taking down and refixing ceiling fan and connecting up including provision of cable from ceililng rose or connector to fan complete all as specified and as directed.

Taking down and refixing old serviceable exhaust fan and connecting up including provinding of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply and fixing energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

S&F 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

S & F LED mirror light fitting 1 x 10 Watt provided with high output diffuser including high efficiency electronic driver complete with LED lamp, prewired upto connection block and connecting with three core PVC copper flexible cable of size 1.5 Sq.mm from ceiling rose to connector block, including taking down old unserviceable mirror light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair LED holder type non dimmable bulb 10 watt complete all as specified and as directed by Engineer-in-Charge.

Supply and fix sheet metal enclosures Loadline distribution board TPN, 4 ways 415 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs and in and including 63A MCCB as incomming complete all as specified and as directed including taking down old MCB DBs complete.

Supply and fix in repair metal enclosure distribution board SPN, 8 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed.

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

M& L for Sub main wiring complete with two runs of 6 sqmm single core FRLS PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including PVC casing and caping fixed to walls / roofs / floors etc., with one run of 6 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified inclduing dismantling unseriveable sub main wiring including accessories.

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

P Babu

M/s K Moorthi

M/s S U Enterprises

RPG AND COMPANY

SK CONSTRUCTION

USR Transport

Govinda Swamy Construction