External Electrification work including new electrical panel and its connections to charge the new modified Studio 3A and 4 in Architecture and Planning Department

Amount

NExternal Electrification work including new electrical panel and its connections to charge the new modified Studio-3A and 4 in Architecture and Planning Department at V.N.I.T. Campus, Nagpur.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 150 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Providing & erecting angle floor mounting, Electrical panel 14 SWG, CRCA sheet powder coated with door of 415V, 250A incoming MCCB (with spreder links) , 1+2 ways four pole outgoing up to 100A MCCB (with spreder links)-1Nos, 125A MCCB (with spreder links)-1 Nos, 415V capacity with short circuit rating 25 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, on iron frame in compliance of IEC 61439, as per specification no SW-SWR/MCCBPB. (Including MCCB with spreader links and control wiring all complete etc. required to commission the panel and as per IEC 61439, Digital multifunction meter ,indicators on each outgoing feeder and push buttons etc with cable alley.)full specification, drawing scheme shall approved from Associate Dean ( Electrical Works) & Assistant Engineer, EMS,VNIT.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 50 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting, testing & commisioning bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25mm ( width) X 5 mm (thickness), with 99.9 % aluminium purity as per E91E grade & current density 0.8 A per sq mm compliance to IS 5082 and enclosure fabricated with 16 SWG CRCA sheet and epoxy paint, with suitable number of ways and with SMC/DMC Insulators and accessories of suitable rating and two nos of separate earthing terminals complete as per specification no. CP-BB

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and erecting iron work,purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm.stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

Everblue Enterprises (BID ID -3196588)