801669/E8 PROVISION OF WORK SERVICES FOR DISPOSAL OF SEWAGE TREATMENT PLANT (STP) WATER AT AFS JALAHALLI BANGALORE

Amount

BOQ Dated Jul 2025

GENERAL SUMMARY NOTE: Schedule ‘A’ Part I to VI are prepriced by MES under Ser No. 1 to 6. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building or Works” as listed in Schedule ‘A’ Part–I

Lumpsum price worked out by the contractor for “Demolition of Septic tank and Soakage well" as listed in Schedule ‘A’ Part–II

Lumpsum price worked out by the contractor for “Path" as listed in Schedule ‘A’ Part - III.

Lumpsum price worked out by the contractor for "Fencing & Gate" as listed in Schedule ‘A’ Part - IV .

Lumpsum price worked out by the contractor for "External Water Supply" as listed in Schedule ‘A’ Part - V .

Lumpsum price worked out by the contractor for “External Electric Supply” as listed in Schedule ‘A’ Part – VI.

Sch 'A' Part - VII : Fittings / Fixtures & Misc items. EXTERNAL WATER SUPPLY Supply, Laying, Testing and commissioning of standard length 250mm (OD) PN 10 HDPE Pipes ISI marked having PE100 grade suitable for potable water conforming to IS 4984 standards for both main line and branch line including all jointing material and fittings etc. complete for gardening / washing purpose network all as specified and as directed.

Material and labour for construction of new PCC masonry valve chamber of size 600 x 600 x 600mm (internal dimension) including necessary excavation and earth work in any type of soil, PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in foundation/ flooring with precast cement concrete block of PCC 1:3:6 type-C-1 using 20mm graded stone aggregate built in CM (1:4) and 10 mm thick rendering in CM 1:4 on internal and exposed external surfaces with and including 40x40x6 mm mild steel angle iron frame and MS sheet cover thickness not less than 3mm with suitable size hinges and locking arrangement and 1 No. 50 mm size 4 lever pad lock with key in duplicate including painting to steel and iron surfaces with two coats of black bituminous paint over a coat of red oxide primer complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 112.5 cum/hr @ 12 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from sump to Earthen pond of CTI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 225 cum/hr @ 50 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from Earthen pond to SWT of CTI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 125 cum/hr @ 22 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from Earthen pond to pressurised network of CTI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 93.7 cum/hr @ 14 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from sump to Earthen pond of 7th Camp (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 187.5 cum/hr @ 32 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from Earthen pond to SWT of 7th camp (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 125 cum/hr @ 22 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from Earthen pond to Pressurized network of 7th camp (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 93.75 cum/hr @ 22 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from sump to Earthen pond of ETI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 187.5 cum/hr @ 27 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable of suitable size, Brass NRV, SS Strainer and electric starter panel of suitable capacity with standard accessories such as breakers, contactors, OL/EF relay, SPP relay, connector blocks, thimbles, volt and ammeter with LED indicators mounted on Sheet metal enclosures complete for treated water from Earthen pond to SWT of ETI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 125 cum/hr @ 22 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for treated water from Earthen pond to pressurized network of ETI (1 Working + 1 Standby)

Supply, Installation, Testing and Commissioning of 300 cum/hr @ 8 mtr head of water pumping capacity, Horizontal Submersible pump set, electric driven 415 V, three phase suitable for supply of treated water complete inclusive of 40 metre long 3 phase submersible flat copper cable heavy duty for DOL/Star and delta connection of suitable size, provision of Cast iron NRV (horizontal / vertical) in delivery pipe, SS strainer of suitable size with standard accessories complete for cascade aerator for ecolakes at CTI, 7th camp and ETI (3 Working + 3 Standby)

Excavation for Boring of holes by trench less Technology under road, pavement, hard standing by using ultra sounding technique and necessary drilling machine including provision of one run HDPE pipe of 250 mm dia suitable for 0.4 mpa working pressure in the bore hole of required length by machine pulling all as specified and as directed.

Supply and fix Valves, Sluice, Cast Iron body, both ends flanged duly drilled of class 1.6 PN, ISI Marked having Stainless Steel spindle and check nut including operating wheel cap, fixing with new nuts, bolts, washers and rubber insertion/ packing complete at outlet rising main pipe line of 200 mm dia all as specified and directed.

Supply and fix Valves, Sluice, Cast Iron body, both ends flanged duly drilled of class 1.6 PN, ISI Marked having Stainless Steel spindle and check nut including operating wheel cap, fixing with new nuts, bolts, washers and rubber insertion/ packing complete at outlet rising main pipe line of 250 mm dia all as specified and as directed.

Supply and fix Valves, NRV, Cast Iron body, both ends flanged duly drilled of class 1.6 PN, ISI Marked including fixing with new nuts, bolts, washers and rubber insertion/ packing complete at outlet rising main pipe line of 250 mm dia all as specified and as directed.

Supply, Laying, Testing and commissioning of standard length (ISI mark) HDPE Pipes of size 50mm (OD) PN10 having PE100 grade suitable for potable water conforming to IS 4984 standards for both mainline and branch line including all jointing material and fittings etc. complete for pressurized piping network. The HDPE pipes are provided with slots or perforation to convey water. The perforations shall be approximately circular and arranged in rows parallel to the axis of the pipe. 10 mm dia perforated hole on 50 mm dia HDPE pipes in staggered style should be placed. The locations of the perforations shall be in the valley of the outside surface.

EXTERNAL ELECTRIC SUPPLY Material and labour for Spreading riddled soil in trenches as in cable cushioning all as per IS 1255-1983 and as directed. Note :- Excavated approved soil shall be riddled by using sieve to separate composite particles etc as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement, only punned thickness shall be considered for payment.

Supply, install, testing and commissioning of LT motor starter Panel board outdoor type, pedestal mounted, dust, weather and vermin proof totally enclosed mounted on platform, factory made having CPRI approved, front and back open able shutters with locking arrangements made of CRCA sheet 3.0mm thick, provision of two earth terminals at bottom of panel board, common earth bus bar of size GI Strip 25 x 3 mm incl provision of brass cable glands, independent steel plates at bottom for each out going and in coming cables in cable alley of panel board and painted with powder coating in Siemens grey colour, suitable for 415 Volts, 50 Hz, three phase, 4 wire system including necessary internal connection with copper conductor and copper lugs. The overall size of the Starter panel shall be suitable to accommodate in and including the following accessories:- (Location : CTI)

(i) Common bus bar chamber with aluminium bus bar of 400 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / Power Contactor/ inter connections & provision of Cable alley (ii) Digital multifunction meter (V,A,F) with suitable CTs – 01 No (iii) LED Indicating lamp RYB - 01 Set (Each set of 3 Nos) (iv) MCCB with LSIG protection Microprocessor based 4 pole 250 Amp 36 kA 415 V - 01 No (Incoming) (v) 10 H.P fully automatic star-delta starter suitable for operating a 3-phase, 10 H.P, 415V, 50Hz submersible pump set, comprising of 01 No. 32A TPN MCB (rupturing capacity 16KA at 415V)-03 Nos. 25A AC3-duty power contactors (Main/Star/Delta)-01 No. thermal overload relay (OLR) adjustable between 10–15A with built-in earth fault protection-01 No, motor protection circuit breaker (MPCB) 20A-01 No. star-delta timer (0–30 sec, 415V control)-01 No. single-phase preventer (SPP) – voltage sensing type-01 No. dry run protection relay – current sensing type (5–15A adjustable)-02 Nos. push buttons (Start: 1NC, Stop: 1NO)-02 Nos. LED indicators (Red–Trip/Green–Run), heavy-duty terminal blocks, internal wiring using 1.5 Sqmm copper wire (control) and 4 Sqmm copper flexible wire (power) with lugs and standard color coding, 415V AC control voltage – all complete as required and as directed by the Engineer-in-Charge- 02 Nos.

(vi) Fully automatic star-delta starter suitable for operating a 3-phase, 60 HP, 415V, 50Hz submersible pump set, including: 01 No. 63A TPN MCCB (rupturing capacity 25 KA at 415V)- 03 Nos. 50A AC3 power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 40–50A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 63A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 30–63A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 16 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge. - 02 Nos. vii) Fully automatic star-delta starter suitable for operating a 3-phase, 20 HP, 415V, 50Hz submersible/normal pump set, including: 01 No. 40A TPN MCB (rupturing capacity 16 KA at 415V)- 03 Nos. 32A AC3 power contactors (Main/ Star/ Delta)- 01 No. thermal overload relay (OLR) adjustable between 25–32A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 40A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 20–40A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 10 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge. – 02 Nos (viii) Fully automatic star-delta starter suitable for operating a 3-phase, 15 HP, 415V, 50Hz submersible pump set, including: 01 No. 32A TPN MCB (rupturing capacity 16KA at 415V)- 03 Nos. 32A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 20–25A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 32A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 15–30A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 6 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge. - 02 Nos. (ix) Angle iron base frame of reqd size as per above panel, total leg height 600 mm and grouting into PCC 150 mm legs and made out of ISA 50 x 50 x 6 mm thick angle iron duly painted - 01 No. (x) M & L for necessary grouting as reqd PCC 1:3:6 type C-1 using (20 mm graded stone aggregate) for foundation of angle iron legs frame work complete.

Supply, install, testing and commissioning of LT motor starter Panel board outdoor type, pedestal mounted, dust, weather and vermin proof totally enclosed mounted on platform, factory made having CPRI approved, front and back openable shutters with locking arrangements made of CRCA sheet 3.0mm thick, provision of two earth terminals at bottom of panel board, common earth bus bar of size GI Strip 25 x 3 mm incl provision of brass cable glands, independent steel plates at bottom for each out going and in coming cables in cable alley of panel board and painted with powder coating in Siemens grey colour, suitable for 415 Volts, 50 Hz, three phase, 4 wire system including necessary internal connection with copper conductor of suitable size and copper lugs. The overall size of the starter panel shall be suitable to accommodate in and including the following accessories:- (Location : 7th Camp)

(i) Common bus bar chamber with aluminium bus bar of 400 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / Power Contactor/ inter connections & provision of Cable alley (ii) Digital multifunction meter (V,A,F) with suitable CTs – 01 No (iii) LED Indicating lamp RYB - 01 Set (Each set of 3 Nos) (iv) MCCB with LSIG protection Microprocessor based 4 pole 250 Amp 36 kA 415 V - 01 No. (Incoming) (v) Supply, installation, testing, and commissioning of 10 H.P fully automatic star-delta starter suitable for operating a 3-phase, 10 H.P, 415V, 50Hz submersible pump set, comprising of 01 No. 32A TPN MCB (rupturing capacity 16KA at 415V), 03 Nos. 25A AC3-duty power contactors (Main/Star/Delta), 01 No. thermal overload relay (OLR) adjustable between 10–15A with built-in earth fault protection, 01 No. motor protection circuit breaker (MPCB) 20A, 01 No. star-delta timer (0–30 sec, 415V control), 01 No. single-phase preventer (SPP) – voltage sensing type, 01 No. dry run protection relay – current sensing type (5–15A adjustable), 02 Nos. push buttons (Start: 1NC, Stop: 1NO), 02 Nos. LED indicators (Red–Trip/Green–Run), heavy-duty terminal blocks, internal wiring using 1.5 Sq.mm copper wire (control) and 4 Sqmm copper flexible wire (power) with lugs and standard color coding, 415V AC control voltage – all complete as required and as directed by the Engineer-in-Charge- 02 Nos. (vi) Fully automatic star-delta starter suitable for operating a 3-phase, 35 HP, 415V, 50Hz submersible pump set, including: 01 No. 63A TPN MCCB (rupturing capacity 25KA at 415V)- 03 Nos. 50A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 40–50A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 63A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 30–63A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 16 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge. - 02 Nos. (vii) Fully automatic star-delta starter suitable for operating a 3-phase, 20 HP, 415V, 50Hz submersible/normal pump set, including: 01 No. 40A TPN MCB (rupturing capacity 16KA at 415V)- 03 Nos. 32A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 25–32A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 40A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 20–40A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 10 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge.- 02 Nos. (viii) Fully automatic star-delta starter suitable for operating a 3-phase, 15 HP, 415V, 50Hz submersible pump set, including: 01 No. 32A TPN MCB (rupturing capacity 16KA at 415V)- 03 Nos. 32A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 20–25A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 32A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 15–30A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 6 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge. - 02 Nos. (ix) Angle iron base frame of reqd size as per above panel, total leg height 600 mm and grouting into PCC 150 mm legs and made out of ISA 50 x 50 x 6 mm thick angle iron duly painted - 01 No. (x) M & L for necessary grouting as reqd PCC 1:3:6 type C-1 using (20 mm graded stone aggregate) for foundation of angle iron legs frame work complete.

Supply, install, testing and commissioning of industrial online real time monitoring system for STP water. The controller shall be of high intelligence and flexibility, which can measure COD，BOD, TSS, PH of water quality parameters and water temperature at the same time and comprising of the following:-

1. Large screen display interface, eye-catching and convenient 2. With digital communication function including all in one PC with monitor processor i7 12th Gen or higher with minimum requirement of 16GB RAM DDR4 RAM, 2 TB NVME SSD storage with WiFi system, Ink tank/ commercial laser jet coloured printer suitable for scan, print, copy of legal size paper & 2 KVA UPS with 30 min backup, can be connected to the upper computer, communication using isolation technology, strong anti-interference ability 3. With relay alarm setting function, the amount of hysteresis can be freely adjusted to avoid frequent relay on and off 4. Password management function to prevent misoperation of non-professional personnel 5. Menu prompt function, convenient for users to operate 6. 4-20mA current output function is optional when purchasing, which is convenient for control center to collect data. Technical parameters of the instrument: Measurement range: COD (0 ~ 1200 mg/L equiv. KHP); BOD:0~1200 mg/L TSS: 0 ~ 1000 mg/L TOC: 1.5 ~ 1100 mg/l equiv KH Accuracy: ±5% Resolution: 0.01mg/L Signal output: RS485 isolated protection output. (Optional 4-20mA current output function is available.) Power supply: AC 220V Power consumption: 60W Environmental conditions: (1) temperature 0 ~ 60 ℃ (2) humidity ≤ 85% RH (i) The makes provided under this item shall be approved makes from KSPCB (ii) In case of any variation in specification as mentioned above, the specification as approved by KSPCB/CPCB shall be followed by the contractor without any price adjustment and extra cost of Govt. No claim whatsoever for such vaiation shall be admissible.

Supply, install, testing and commissioning of LT motor starter Panel board outdoor type, pedestal mounted, dust, weather and vermin proof totally enclosed mounted on platform, factory made having CPRI approved, front and back openable shutters with locking arrangements made of CRCA sheet 3.0mm thick, provision of two earth terminals at bottom of panel board, common earth bus bar of size GI Strip 25 x 3 mm incl provision of brass cable glands, independent steel plates at bottom for each out going and in coming cables in cable alley of panel board and painted with powder coating in Siemens grey colour, suitable for 415 Volts, 50 Hz, three phase, 4 wire system including necessary internal connection with copper conductor of suitable size and copper lugs. The overall size of the starter panel shall be suitable to accommodate in and including the following accessories:- (Location : ETI)

(i) Common bus bar chamber with aluminium bus bar of 400 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / Power Contactor/ inter connections & provision of Cable ally (ii) Digital multifunction VAF meter with suitable CTs – 01 No (iii) LED Indicating lamp RYB - 01 Set (Each set of 3 Nos) (iv) MCCB with LSIG protection Microprocessor based 4 pole 250 Amp 36 kA 415 V - 01 No (Incoming) (vi) Fully automatic star-delta starter suitable for operating a 3-phase, 30 HP, 415V, 50Hz submersible pump set, including: 01 No. 50A TPN MCCB (rupturing capacity 25KA at 415V)- 03 Nos. 40A AC3-duty power contactors (Main/Star/ Delta)- 01 No. thermal overload relay (OLR) adjustable between 32–40A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 50A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 25–50A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 16 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge.- 02 Nos. (vii) Fully automatic star-delta starter suitable for operating a 3-phase, 20 HP, 415V, 50Hz submersible pump set, including: 01 No. 40A TPN MCB (rupturing capacity 16KA at 415V)- 03 Nos. 32A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 25–32A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 40A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 20–40A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 sq.mm copper wire (control) and 10 sq.mm copper flexible wire (power) with ferrules and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge.- 02 Nos viii) Fully automatic star-delta starter suitable for operating a 3-phase, 15 HP, 415V, 50Hz submersible pump set, including: 01 No. 32A TPN MCB (rupturing capacity 16KA at 415V)- 03 Nos. 32A AC3-duty power contactors (Main/Star/Delta)- 01 No. thermal overload relay (OLR) adjustable between 20–25A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 32A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 15–30A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 6 Sqmm copper flexible wire (power) with lugs and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge.- 02 Nos. (ix) Angle iron base frame of reqd size as per above panel, total leg height 600 mm and grouting into PCC 150 mm legs and made out of ISA 50 x 50 x 6 mm thick angle iron duly painted - 01 No. (x) M & L for necessary grouting as reqd PCC 1:3:6 type C-1 using (20 mm graded stone aggregate) for foundation of angle iron legs frame work complete.

Supply, install, testing and commissioning of LT motor starter Panel board outdoor type, pedestal mounted, dust, weather and vermin proof totally enclosed mounted on platform, factory made having CPRI approved, front and back openable shutters with locking arrangements made of CRCA sheet 3.0mm thick, provision of two earth terminals at bottom of panel board, common earth bus bar of size GI Strip 25 x 3 mm incl provision of brass cable glands, independent steel plates at bottom for each out going and in coming cables in cable alley of panel board and painted with powder coating in Siemens grey colour, suitable for 415 Volts, 50 Hz, three phase, 4 wire system including necessary internal connection with copper conductor of suitable size and copper lugs. The overall size of the feeder pillar box shall be suitable to accommodate in and including the following accessories:- (Location : CTI)

(i) Common bus bar chamber with aluminium bus bar of 200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / Power Contactor/ inter connections & provision of Cable alley (ii) ) Digital multifunction meter (V,A,F)with suitable CTs – 01 No. (iii) LED Indicating lamp RYB - 01 Set (Each set of 3 Nos) (iv) MCCB with LSIG protection Microprocessor based 4 pole 63 Amp 36 kA 415 V - 01 No (Incoming) (v) Fully automatic star-delta starter suitable for operating a 3-phase, 12.5 HP, 415V, 50Hz submersible pump set, including: 01 No. 32A TPN MCB (rupturing capacity 16KAat 415V)- 03 Nos. 25A AC3-duty power contactors (Main/Star/ Delta)- 01 No. thermal overload relay (OLR) adjustable between 15–20A with built-in earth fault protection- 01 No. motor protection circuit breaker (MPCB) 25A- 01 No. star-delta timer (0–30 sec, 415V control)- 01 No. single-phase preventer (SPP) - voltage sensing type- 01 No. dry run protection relay (current sensing type, 10–25A adjustable)- 02 Nos. push buttons (Start: 1NC, Stop: 1NO)- 02 Nos. LED indicators (Red-Trip/Green-Run)- heavy-duty terminal blocks- internal wiring using 1.5 Sqmm copper wire (control) and 6 Sqmm copper flexible wire (power) with ferrules and standard color coding- 415V AC control voltage- all as directed by Engineer-in-Charge.- 02 Nos.

M/s. P S REDDY (BID ID -3386380)

GOVARDHAN AND COMPANY (BID ID -3386155)

N RAJEGOWDA and CO (BID ID -3386426)

United Sales Corporation (BID ID -3389863)