repair and renovation of toilets in the office building and trainees hostel at KVK Pandu Pindara Jind reinvited

Amount

Loading , unloading for sand /earth/building rubish {HSR 4.1 (a)}

Disposal/ carriage of material / building rubbish ( metalled road) with a lead of 2 K.M. excluding loading, unloading {HSR 5.2 (a)}

Removing door and windows (wood and steel) with chowkats by making recesses in walls when the wall is not to be dismantled {HSR 8.18 (a)}:- (a) doors

Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm thick including concrete base. {HSR 8.25}

Scraping (c) Cement plaster {HSR 8.32(c)}

Dismantling white or coloured glazed tiles (to be carefully removed) {HSR 8.38}

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in foundation and plinth. {HSR 10.41}

First class brick work laid in cement sand mortar 1:4 in foundation and plinth {HSR 11.4}

11.43 cm thick brick wall laid in cement sand mortar 1:4 without reinforcement , in foundation and plinth{HSR 11.47}

Providing and fixing PVC rain water pipe pressure of ISI mark in cement mortar during masonry work {HSR 13.89 (a)} (a) 100 mm dia PVC pipe 6 kg. pressure

Providing and fixing PVC bend ISI mark (HSR 13.90) (a) 100 mm dia PVC bend

Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. {HSR 14.1}

Providing and fixing ceramic tiles/ anti skid tiles of size 400 mm x 400 mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. {HSR 14.91} Notes: i. Tile shall be premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI & RAK. ii. Tiles shall be fixed by using PVC spacers of required size and the space between tiles shall be filled up with cement based grout of approved make & colour. Nothing extra shall be paid for this.

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colour, shades except burgundy, bottle green, black of any size of approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement coarse sand mortar 1:3 and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. {HSR 14.92} (a) size of ceramic glazed tiles 200 mm x 300 mm

12 mm thick cement plaster 1:4 on walls {HSR 15.5}

Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead , linseed oil, varnish and chalk mitti including finishing the surface to required finish complete (HSR 16.1)

Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3)

Preparation of plastered surfaces for oil bound distemper including sand papering the surface, applying one coat of linseed oil, and filling with approved quality filler, consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to the required finish complete (HSR 16.52)

Distempering with washable oil bound distemper (of approved manufacture) two coasts over priming coat on new work (HSR 16.58)

Providing and applying two coats of white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc., complete (J.K/ Birla make). (HSR 16.81)

Commercial hard wood such as hollock, champ, chikrassy and chaplash ,etc.,(non coniferous timber other than teak conforming to I.S. specification No. 1003 kiln seasoned), shutters with vertical styles and rails, as specified in the statement No.1 (attached in the end of this chapter) , with two Nos. plywood panels of the specified thickness, mentioned below , tongued and grooved including the cost of iron hinges, screws, chocks/cleats, stops ,etc. ,complete fixed in position excluding the cost of tower bolts and handles but including the labour for fixing the same- {HSR 17.30 (b)+note} (b) 30 mm thick (12 mm thick BWR Grade-II ply wood panel) Note: Nothing shall be paid extra for additional vertical style (any size) if required by the Architect or by the Engineer-in-Charge)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS; 733 and IS;1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom, and sides with required neoprene felt etc. Aluminium sections shall be smooth, rust free straight mitered and jointed mechanically wherever required including clear angle, Aluminium snap beading for glazing/ paneling C.P. brass/ stainless steel screws, etc. complete. Shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including of cost of PVC/ neoprene gasket required including Aluminium fitting. (HSR 17.96)

Providing and fixing 12 mm thick pre laminated particle board flat pressed three layer or graded wood particle board conforming to IS;12823 grade I type II in paneling fixed in aluminium doors. Windows shutters and partition frames with c.p. brass/ stainless steel screws etc. complete. (HSR 17.97) (b) Pre-laminated particle board with decorative lamination on both sides.

Labour for laying, jointing, fixing and testing G.I./P.V.C./W.I. pipe lines and specials tees, bends, sockets elbows etc. inside building and testing etc. complete including cutting threading. {HSR 28.18(b)} INCLUDING COST OF SPECIALS (i) 15 mm internal diameter of pipe line

(ii) 20 mm internal diameter of pipe line

Extra for fixing and jointing union couplings in G.I and W.I pipe lines. {HSR 28.21} (a) 15 mm internal diameter

(b) 20 mm internal diameter

Cutting holes up to 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. {HSR 28.24(b)} (b) 22.86 cm thickness of walls

Constructing brick masonry inspection chambers sizes as given below up to 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent lime mortar2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2:4 slab 100 mm thick/C.C. topping. 50 mm thick with 455 mm x 455 mm/ 455 mm x 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I specification painted with 3 coats of black bitumastic superior paint complete as per standard design. {HSR 29.84} (b) size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)

Providing and fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian type Orissa or orya water closet suite for sinking into floor, with raised foot treads complete with 100 mm H.C.I ‘P’ trap with or without vent as required and all other necessary fittings as fully described in item no. 30.1 above (excluding cost of CI high level flushing cistern) (based on HSR 30.2) (a) 580 mm (i) WHITE

Providing and fixing in position best Indian make European type water closet suite with concealed ‘P’ of ‘S’ trap with or without vent (as approved by the Engineer-in-Charge) and all other necessary fittings as fully described in item No. 30.3 above (excluding cost of CI high level flushing cistern) (based on HSR 30.6) (i) (White)

Extra over item no. 30.3 to 30.6 for providing and fixing best Indian make plastic hygenic seat with lid complete instead of hollow black or white plastic seat and lid. (HSR 30.13) (i) White plastic seat ( Solid)

Providing and fixing in position best Indian make (ordinary) lavatory suites consisting of Lavatory in vitreous china ware size as given below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary, R.S or C.I brackets for building into wall including painting; 32 mm C.P. brass waste with C.P brass chain and rubber plug; 15 mm C.P brass screw down pillar tap with jamnuts or couplings best design ( as approved by the Engineer-in-charge) all fittings best Indian make and; to the approval of the Engineer-in-charge all brass work chromium plated and complete in all respects including cutting and making good the walls and floors and painting of fittings etc. {HSR 30.41(iv)} WHITE (iv) size 550 mm x400 mm with one no tap

Providing and fixing in position best Indian make towel rails fixed in with rawlslugs embedded in walls with C.P brass screws. Complete in all respects including cutting and making good the walls etc. {HSR 30.68 (e)} (e) C.P. brass towel ring

Providing and fixing in position best Indian make bevelled edge 5.5 mm thick mirror mounted on asbestos sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers over rubber washers and rawl plug embedded in the wall of chromium plated brass clamps with C.P brass screws ( as required by the Engineer-in-charge) complete including cutting and making good the walls etc. {HSR 30.71(a)(i)} (a) Indian make (i) 600mmx450mm

Providing and fixing in position 15 mm i/d C.P brass bib cocks of best quality ( as required by the Engineer-in-charge).HSR 30.75} (a) Bib cock long body

(c) Bib cock

Providing and fixing in position best Indian make C.P brass inlet connection 15mm with 375mm pipe and C.P brass nuts.. HSR 30.83}

Cutting chase in brick walls in cement or in floor for embedding G.I. or H.C.I. pipe lines and making good the same to its original condition. HSR 30.95(a)} (a) size 75 mm X 75 mm

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with H.C.I. grating 150 mm X 150 mm cast iron cover weighing approximately 7.26 kg. and frame clear opening 300 mm X 300 mm and outside size 330 mm X 330 mm and chamber including cost of all brick work in cement mortar 1:5 cement concrete 1:8:16 in foundations, and cement concrete 1:2:4 in coping around C.I. cover and frame et. With three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design, minimum depth of water should be 150 mm with a minimum seal 50 mm HSR 30.114(b)} (b) 100 mm internal diameter H.C.I. gully trap

Supply and fixing of PVC pipes and specials of 6 kg/cm² pressure including cutting & westage etc. of ISI marked of Prince / Supreme/vindhya make complete in all respect. (N.S.) a) 80 mm o/dia size (3" internal dia)

Providing and fixing PVC floor trap complete in all respect. (N.S.) a) 80mm o/dia size (3" internal dia)

Supply of G.I. pipe ‘B’ class ISI marked of ‘Ravindra’/ ‘Jindal/Parkash ( Surya)/BST/ make. (N.S.) (a) 15 mm internal dia

(b) 20 mm internal dia

Supply of G.I. Union couplings of Unik / Unco make. (N.S.) (a) 15 mm internal dia

(b) 20 mm internal dia

Providing and fixing in position PVC flushing cistern 8.0 ltrs. capacity of Hindware/Cera make, white, alongwith fittings complete in all respect. (N.S.)

Providing and fixing in position C.P. brass jet with flexible pipe 15 mm i/dia (to be fixed with the EWC) of best quality complete in all respect (excluding cost of C.P.brass conceiled stop cock). (N.S.)