Turnkey Proj Supply and Installation of All Weather Proof Tensile Structure with Seating Arcade at Pipping Lawn (East and West side) of OTA, Chennai

Amount

"Construction of Tensile Structure" (East side 80’ x 22’ = 1760 Sq ft, West side – 60’ x 22’ = 1320 Sq ft) (i) Fabric: Satller Pro Tex Red with item code 0057 (ii) Ferrari: Red Ferrari 900 GSM opaque. (iii) Colour: RED (iv) GSM:900 GSM (iv) Flame Retardancy M2/B1 (v) Temperature Resistance -30 to +70 (vi) Design Butterfy tupe

MS Steel structure CR round pipe of thickness (both side). For Support 3mm and main pillar 5mm Dia of Pipe 8 inches, 6 inches and 4 inches respectively. Bath plate thichmess 16mm size 30 x 24 inches "Construction of RCC Foundation and development work around its area" Civil foundation as per M20 grade of size 5ft x 5ft x5 ft with 16, 12, 8, 6mm rod respectively as per drawings. (a) Earth work excavation in foundation, trences etc. In all soils mixed with gravels trimming and preparing the bed for foundation and dewatering. Disposing of the surplus earth up to 800mtrs lead and lift up to 2mtr. etc. (b) Filling in plinth, foundation with locally availale suitable mateial under floor, foundation to where and any level including watering, ramming, consolidation and desired level Providing Cement coarse 1:3:6 (c) Providing and laying PCC: 1:2:4 grade M-15 in foundation with 200mm of down screened washed approve quality to cure dampness. (d) Providing and laying RCC 1:1:4 grade M-20 in foundation, super structure for foundation tank and using 20mm and down screened wash stone chip as base layer. (e) Fixing steel reinforcement for reinforced cement concrete wwrk including transportion decoiling, straightening, bending and placing at any heights with 18 swg MS wire.

"Construction of PCC step slab having combination of RCC and brick wall in step platform" (both side) PCC Grade: Thickness 4 inches at edges with flat 6x6x12 inches U channel type at center. Retaining RCC wall, MS Rod 6mm main frame Retaining wall: M class I No of steps 4 Height of steps 5, 10, 15, 20 inches respectively Providing and laying plain cement concrete 1:2:4 (1cement: 2 coarse sand: 4 stone aggregate) grade M15 in foundation

"Chair Out Door Alloy automatic fold chairs" (both side) Material: Alloy DZ Frame Type: Mono block pressure casting Type : With Hand rest Seat and backrest material: HDPE Alloy HDPE Soft Chair UV coated.

Installation of 1200mm ceiling fan 24 with circular type channel and 2.5 sqmm wire in two circuit placed in 1 inch branded conduict and set of panel box with laying UG Cu cable armoured 4 sqmm two core cable 300 running mtr in length to be placed 1 ft BFF

Floor painting with floor coat paint applied on two layer of Asian primer paint Total area to be covered.

ABAXIS DESIGN AND BUILD PRIVATE LIMITED