Repair, maintenance of 220V, 440V overhead line initiating from old check post weigh-bridge of AADOCM to parking yard at 12 no. sub-station for the smooth power supply in AADOCM.

Amount

Supply and providing of RCC/PCC pole length above 8 mtr. upto 11 mtr. long with transportation.

Erection of PCC pole of following length in brick ballast and ramming the foundation, finishing with 150 mm thick cement concrete (1:3:6) layer on top with including excavation and re-filling etc. as required. : Above 8.0 metre and upto 11.0 metre

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and re-filling etc. as required : Above 10.00 Mtrs. & upto 12.00 mtrs.

Erection of all aluminium conductor of 7/1.96mm to 7/3.10 diameter and above including binding etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 metres long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, bow tightener, 7/3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm x 80 mm pin insulator complete with G.I. spindle and nuts etc. as required.

Supplying and erection of galvanised ‘D’ iron clamps complete with shackle insulator (100 mm x 110 mm), G.I. bolts, nuts and washers, coach screw etc. as required.

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required

Supplying of channel iron 75 mm x 40 mm x 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with and finished paint as required.

Erection of angle iron/ channel iron cross arm on PCC/ steel tubular/ rail pole etc. as required.

Supply of 6 SWG G.I. wire for cradling.

Erection of G.I. wire.

Transporting of pole from E&M store to working site.

Dismantling of damaged pole embedded in cement concrete foundation etc. as required.

Dismantling of overhead lines comprising of copper/aluminum overhead conductor, G.I. wire cross arms, insulators etc. as required.

Total impact of GST for the purpose of CTC

M/s Saloni Sales

M/S KUMAR ENTERPRISES