Internal Electrification of 2 Nos Tube Well along with creation of 100 KVA Distribution Substation, Control Panel, servo Stabilizer and Main supplying cable at I/E, Balole under languishing Scheme.

Amount

Point wiring:-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Make of Accessories : Schneider/MK/ Schneider, Make ofwires : Finolex/Havells/Polycab - Group C

Circuit Wiring:-Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6.0sq. mm + 1 X 6.0sq. mm earth wire

Modular Type Switches & Accessories:-Supplying and fixing of following modular type switch /socket, etc on the existing G.I box including connection etc as required.

15/16A Amps switch.

6 pin15/16 Amps socket outlet

3pin 5/6 Amp. socket outlet

5/6A switch

S/F modular type electronic fan regulator:-Supplying and fixing two modular stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc., as required.

S/F ceiling rose:- Supplying and fixing 3pin 5 Amp ceiling rose on the existing junction box/wooden block including connection etc. as required.

Ceiling Light:-Supplying and Fixing of 6/7 Watt LED light along with allied accessories including connection etc as required.

S/F modular boxes, base and cover plate :-Supplying and fixing following size/modules , GI box along with modular base & cover plate for modular switches in recess etc. as required.3 module ( 100mm x 75mm)

Tube light Fitting:-Supplying, Installation, testing and commissioning 20 Watt LED Wall mounted fitting along with all 1accessories including connection with 1.5 Sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Providing and Fixing of LED 45 Watt Security Light:- Providing and fixing of 45 Watt LED Security light having fixing on wall with the help of bracket , Clamps & Nut Bolts etc. complete job includes cost of material labour charges etc at site. Complete job.

MCB Distribution Boards:- Supplying and fixing following way single pole and neutral sheet steel MCB Distribution Boards 240Volt on surface/recess complete with tinned copper busbar neutral busbar, earth bar, dinbar, detachable, gland plate, interconnections, phosphatized & powder painted including earthing etc as required (But without MCB / RCCB / Isolator) 8 way (Double door)

MCB’s:- Supplying and fixing of 5 to 32 Amp rating 240 V series miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing & commissioning etc. as required..

Single pole 6 Amp.

Single pole 16 Amp.

SPN 32 Amp

Ceiling fan with cover on fan box:-Supplying, Installation, testing and commissioning of ceiling fan1200 mm sweep including wiring the down rods of standard length (upto 30 cm) with 1.5 Sq.mm FR PVC insulated, copper conductor, single core cable including providing and fixing of phenolic laminated sheet cover on the fan box. (But excluding speed regulator)

Exhaust fan upto 300 mm sweep: Installation of exhaust fan upto 300mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

Submersible Cable:-Supplying of 3 core x 6 Sq.mm PVC insulated submersible copper cable clamp with submersible pump set including connection etc. as required.

Power Cable :-Supply, laying, testing and commissioning of 1.1 KV grade Aluminum conductor PVC insulated PVC sheathed, steel armoured cable, 0.75 M below ground including digging of trench 0.35 M wide 0.75 M depth as per requirement etc. complete job in all Respect.3.5C x 35 Sq.mm

Control Panel:-Fabrication, wiring, supply installation testing & commissioning of control panel Double door out Door type front operated made of 14/16 SWG MS sheet painted with two coats of primer complete with earthing stud, drilling of holes on the board for entry of cables, consisting of following items:- MCCB 4P- 100 Amp 25 KA- 1 Nos . MCC 4P 63A 25KA- 3 Nos. SPN 40 Amp-2 Nos. Change over switch 63 Amp- 2 Nos. 1 Set of indicator Voltmeter (o-500 Volts) – 1 No. Amper Meter (0-60 Amp) with C.T SET Aluminum Bus Bar 4 pole as per required Gauge & size Start Delta starter comprising of contractor ML3- 2 Noand ML2- 1 No, suitable thermal relay , timer- 1 No, single phase premeter. Push button for on/off and wiring with Kitkat fuse Manual operated 45 KVAR capacitor Bank with allied MCB and capacitor.

Earthing :- Making of earthing station using chemical type 50 mm Dia G.I Earth electrode maintenance free & providing masonry enclosed with cover plate having locking arrangement as required.

Supplying/Errection/Testing/ Commissioning of 100 KVA Distribution Substation:-S/E/T/C of 100 KVA Distribution substation in proposed Tube Well No.9,10 and11 at IGC Samba Phase-III consisting of following components- a) 100 KVA Distribution Transformer 11/0 433 KVA 3 energy Level-2 Aluminium wound with filling of fresh etc. as required- 1 No. b)P/F of steel tubular pole 410-SP-33 the pole shall be amount which shall be painted with red oxide & two coats of simmer paint cemented upto 5 feet in the ratio of 1:3:6 with 1 feet of Muff above the grand level with surface plastering etc. as required - 2 Nos. c)Gapless surge arrester 9 KV, 10KV L.A with polymer/ porcelain Housing station type- 1Set d)11 KV G.O AB Switch 3 3 pole 400A – 1 Set e)11 KV DO fuse 3 phase 400 Amp – 1 Set f)11 KV Disc insulators (Polymer/ Porcelain) complete with fitting (45 KN) – 3 No. g)GI Chanel/ Angle/ Flat of size including damps – 200 Kg. h)11 KV Pin insulators (polymer/porcelain) with pins (5 KN) – 3 No. i)Galvanized stay set with 50 x8 mm stay clamp, guy insulator (2 Nos), Anchor plate ( 200x 200 x 6 mm) Nut Bolts 2 No. turn Buckles 1.8m long 16 mm Dia meter solid GS stay rod 2 7/3.15 mm Dia GI stranded wire complete -2 Set. j)Wedge connector/ PG clamps – 6 Nos.

k)P/F of 1x185 unarmored Aluminium cable with thiumbling to end terminals – 15 Mtr. l)GalvanizedNut & Bolts – 8 Kg. m)Danger plate with clamp – 1 No. n)G.I Barbed wire for Anti climbing- 15 Kg. o) 3 Phase & 4 wire trivector meter with C.T/P.T for metering – 1 Job. p)P/F of 0.05 ACSR Conductor – 10 Mtr q) Making of earthing station using chemical type 50 mm Dia G.I Earth electrode maintenance free & providing masonry enclosed with cover plate having locking arrangement as required – 3 Nos. r) P/F of 25 x 5 mm G.I strip on surface or in recess for connection etc as required. s)Sundry items like Aluminium lugs, Jumpess Binding tape etc - LS t)P/F of fuse link Bus Bar on Angle iron for protection of transformer – 1 No. u)Providing & Fitting of insulator conductor, Disc and all allied accessories in tapping point – 1 No