CONSTRUCTION OF 5 NOS. GRAMPANCHAYAT BUILDING AT VANAKBARA AND SAUDWADI AREA (2nd CALL)

Amount

Works

CIVIL WORK: Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(D) By mechanical means in area of thorny jungle

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff to all lead and lift.(B)all type soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff to all lead and lift.(B) all type soil

Boring,providing and installing bored cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified excluding the cost of steel reinforcement but including the cost of boaring with bentonite solution and temporary casting of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. all complete, including removal of excavated earth with all lifts and leads (length of pile payment shall be measured upto bottom of pile cap) 600mm dia

Filling in foundation and plinth with rubble soiling in layers of 20cm. thickness including watering, ramming and consolidating etc. complete.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Foundations, footings, Base of columns and Mass concrete as per direction of the Engineer - in - charge.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Ground Beams & Plinth Beams.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D) Columns, Pillars posts and struts, upto plinth level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Slab Beams, cantilever beams. Upto floor two level

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Slabs, landings, shelves, balconies and cantilever slabs. FOUNDATATION AND PLINTH LEVEL.

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in Slabs, landings, shelves, balconies and cantilever slabs.(upto floor two level)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (D) Columns (upto floor two level)

Providing and laying controlled cement concrete M.250 and curing complete including the cost of formwork and excluding reinforcement for reinforced concrete work in (C) Chajja and lintel (upto floor two level)

Providing TMT Bar FE 500D reinforcement confirming IS: 1786-2008 for R.C.C. work including bending, binding and placing in position complete Primary Steel (TATA, SAIL, JSW, ISPAT). (upto floor two level) as directed by Engineer in Charge.

Providing fusion bonded Epoxy coating not less than 175 micron thickness and up to 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes (A) 8mm to 16mm dia bar. (upto floor two level)

White Stone Bela mesonry block in course in foundation and plinth with stone of approved quality in Cement Morter 1:5 (1 Cement : 5- course sand) including packing the joints etc. complete.

White Stone Bela mesonry block in course in superstructure with stone of approved quality in Cement Morter 1:5 (1 Cement : 5- course sand) including packing the joints etc. complete.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering and including to groove super structure upto all floor level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete EIC

Providing and laying mirror polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying mirror polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing,groove etc. complete. etc. complete as per EIC.

P & L 24" x 24" vitrified 8 mm thick tile flooring and skirtting over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and mat/glossy finish and jointed with color cement slurry including finised with flush pointing & cleaning the surface and MAAT finished tiles to be used etc. complete for antiskit

Providing and laying Ceramic tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry etc. complete as per EIC.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. as per Engineer in charge.

Providing and fixing pre-cast rubber Dye / Steel Dye interlocking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved designed confirming to IS 15658:2006 including 35mm sand layer for levelling & filling the joints with sand in proper line and level as per guidlines of IRC:SP 63-2018 etc. complete.

Constructing og Under Ground water tank with Providing and laying controlled cement concrete M200 mix for R.C.C. work including rainforcement, boxing, centering,vibrating, curing and mixed with approved water proofing cement compound or "CEMWET" or " PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for under ground water tank item incl. Necessary excavation & refilling the available earth, 15 cm thk 1:4:8 for bedding of concrete, 15 mm thk. water proofing cement plaster in C.M. 1:3 with smooth finishing, vata, watering etc. Comp. to all face of tank . including locking arrengement outlet, inlet, overflow and washout outlet pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking arrengment. etc.with approved structural drawing and inclusive of all for one or more tank as per requirement .in all strata loose/hard/hard rock directed by Eng-in-charge

Providing and applying water proofing treatments on RCC under ground water tank / over head tank from in / outside & sides of the sunken slab /two compnent elastometric - flexible - reinforced membrane coating incuding ceaning the surface, treating the joints, filling the cracks with non-shrink grout including finally finished with C.M. 1:3 with adding 5% polymer etc complete as directed for completed items of work as per specification at all levels with 10 years gaurantee and work to be carried out in all floor and all height etc COMPLETE EIC

Providing and laying cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge. - With average thickness of 120 mm and minimum thickness at khurra as 65 mm. all complete as directed by engineer incharge.

Providing 10mm thick celling cement plaster in single coat on brick/concrete walls/slab for interior plastering super structure upto floor level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand)

Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Providing Powder coating to the new mild steel and other metal surfaces (thickness not less than 50 micron) with interior to give an even shade including cleaning the surface of all dirt, dust and other foreign matter with all transpotation, loading and unloading charges as directed by engineer in charge.

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to frame as per details etc (s.s mosquito net fixed as per directed)

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour anodized alluminium frame with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium frame for ventilation with 5 mm thick frosted glass as details etc complete for.window

Providing and fixing 35 mm thick teak wood shutters for Doors, windows and clerestory windows including Indian teak wood frames 12 cm x 7 cm. size including black enamelled iron oxidized fixtures and fastenings including primer coat of approved quality and two coats of oil painting, two number of 18 inch S.S. Handle etc, complete. (ii) Fully Panelled.

Providing material and labour for fixing ISI marked flush door shutters ( Partially panneled and Partially glazed) conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including indian teak wood frames 12 cm x 7 cm. size, ISI marked Stainless Steel butt hinges with necessary screws, with Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS :2046 Type S, including cost of adhesive of approved quality 1.0mm Thick on both face, with Providing and fixing S.S. tower bolts (barrel type) with necessary screws etc 200mm long x10mm dia, with Providing and fixing S.S. Door Aldrop with necessary screws etc. 300mm long x20mm dia, Providing and fixing S.S. Door Aldrop with necessary screws etc 250mm long x20mm dia, with Providing and fixing S.S. Pipe Handle for door 45cm size on both side of Door shutter with Providing and fixing S.S hanging type floor door stopper with necessary screws, etc. complete as directed by Engineer in charge. All S.S Shall be ASIS 304 Grade.

Providing and fixing FRP frame size 100 X 50mmand 28mm thick FRP depress panel shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected fire retardant grade polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, termite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary frame screws & alluminium fixtures & fastenings & fastener sleeve.

Providing and fixing M.S. round or square bars with M.S.flats at required spacing of windows and clerestory windows. (MS GRILL)Complete of EIC/AS per drawing

Wall painting(two coat) with plastic emultion paint of approved brand & manufacture on undecorated wall surface to give an required shape even shade after throughly brushing the surface to remove all dirt, and remains of loose powered materials. Etc Complete.

Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 1 M. as per approved by architect. COMPLETE EIC

Providing & laying sandwitch Kitchen platform (sandwitch of 18 mm thk Granite/Kotah stone of approved shade of sandwitch type of required Top pattern stone sandwitch of 18 mm thk Granite of approved shade of approved shade and sample on top and 25 mm thk kota in bottom with 30 mm thk screed of (1:2:4) in between)with sandwitch supports of 25 mm thk two kota on sides and screed in between and 75 mm raised platform with kota on top as per design and approved sample for all floors / all levels / all heights. The rate includes cutting for sink, rounding, champhering and mirror polishing of edges, facias of granite, including necessary bonding adhesive like Araldite or equivalent. (Only plan area shall be measured and paid for). The rate includes rounding, champhering and mirror polishing of edges. Rate shall be exclusive of SS sink, , Piller tap, Bib tap-couplin etc. complete. A) 18mm thick Granite Top Sandwich type plateform( Granite Shall be approved shade by Architect /Consultants )

Applying general insecticide pest control treatment to floors ,cupboards,plinth,walls etc including labour material etc. complete. Using heptachloride 20 EC. As per 6113_pest Consentration Weight 0.50 percent is recommended one litre chemical emulison dillute with 39 litre of water will give . total dillute concrentration will be 40 litre inclusive of one litre chemical emulsion appication 0.5 /litre chemical/sqm of surface is recommended as per is including rate in plinth

Providing and fixing 18 mm thick machine cut, mirror / egg shell polished , Granite stone work of approved shape, size, color, design and pattern as per approved architect for wall lining (veneer work) including dado, skirting, risers of steps, door / window sill and four side windows , lift facade, ledges, etc., including edge moulding,rounding the edges etc. wherever required as per design & grooves and moulds truly in plumb in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing, removing any unevenness on the surface etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge for all lift,all floor levels, all heights and leads. The item to include all materiral, fixing, scaffolding, labour, Wastage etc. complete in all respects. Required test shall be done as per relavent IS Code. Note: No extra payment pay for architectural Ornamental Design upto 10% of flooring area. Rate shall be inclusive of cutting of slab in any shape, at any level for service cutout.COMPLETE EIC

Providing and fixing notice board made out of 12mm thick soft board with good quality of fabric & wooden framing finish with melamine polish. Complete with all necessary hardwareNotice Board.COMPLETE EIC

Laminate finished( Both side)Sliding & Folding partition (solid) : Providing & fixing 12mm thick Commercial BWR 303 grade plywood fixed on frame work on both side finished with 1mm thick laminate. The frame work shall be made from square hollow aluminium section of approved make conforming to IS specification of size 38 x 38 x 1.6 mm vertically and horizontally. The framework shall be fixed as per drawing vertically @ 600 mm c/c & horizontally 1200 mm c/c and first horizontal member shall be fixed at gr. level. In partion frame work (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered with approved make plywood ,adhesive ,tape, headless nails hinges etc ,finished with 1mm thick laminate in pattern as shown in the drawing etc complete as per drawing or as directed by EIC/ Architect.

Providing and fixing chicken mesh of 22 gauge,with about 30cm.width at the junction of R.C.C member sand brickwork,of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete.

Providing drip course groove/ pointing in plastered surface or moulding to R.C.C projection as per drawings/directed by EIC/Architect.

supply fabricating and installation in position and testing galvanized MS gate of width 6m and height of about 1.5m out of channel joints,angles,flates,plates,pipes including stiffers,bracing,fabricated hinks,MS arrangement etc.including charge to be transportation,loading,labur,welding etc.complete to be EIC/as per drawing.

PLUMBING: Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour (MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B)white plastic seal and cover.

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 20mm size.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing brass screw down stop tap.(A) 15mm dia.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Providing and fixing chromium plated brass half trun flush cock of approved quality including fixing in pipe line etc. complete.(i) 20mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing ball cock of approved. quality as directed.(B) Abonite (ii) 50mm dia.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or shall be concelled as directed including necessary fittings etc. including testing of pipe and joints and fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure (PVC) poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following nominal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm nominal size) bedding for stoneware pipes of following internal diameters with necessary formwork and curing complete.(B) 150mm dia. (166mm Ave. bed thickness)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type.

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm

Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton)

Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not less than 35Kg.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and fixing 12.5 Litres flushing cistern with A pair of C.I. or Mild steel brackets, womplete with fittings such as syplionic arrangement, 15mm nominal size brass ball valve with polythene float, lever G.I. China (60 cm. ) and pull union and couplings for connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making good the same.

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of cover to be not less 4.53 Kg.) (upto 10 ton)(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing & fixing PVC water tank such as Sintex or equivalent on terrace, loft as directed by Engineer incharge including loading, unloading at site, supply and fixing on inlet, air vent, overflow, wash out with necessary gasket / packing, washer, check nuts and padestal of 300 mm height made of brick work and plaster.(MAKE AS APPENDIXE-1)COMPLETE EIC/ARCHITECT

Providing and drilling 300 mm dia pilot bore hole in alluvial strata by directed rotary rig remaining blind,lowering of housing casing of pilot bore hole 450mm dia including assembling lowering housing casing strainer pipe,casing pipe of 200 mm dia,screen pipe strainer pipe as per assembly with 4 to 6 mm best quality of sevaliya gravel packing/clay packing etc.& devlopment of bore by back washing &,Geohydrological ground water investigation etc complete.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C type depth 2.25 Metre for 150mm diameter sewer.

(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with dry masonry work at top for 45cm. height including covering the top with stone including providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. (upto 10 ton)

Providing and fixing kitchen sink with CI or MS brackets, painted white including cutting holes in walls and making good the same including fittings lime c. P. brass waste, M. I. Fisher union etc. © Vitreous china sink (600 mm x 450 mm x 150 mm)

LANDSCAPING ROAD site tree : Providing and planting BRUSH TREE including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .including cost of soil filling and size of 5' to 6'

Providing and planting TABEBUIA ROSSIA including excavation 450 X 450 X 450 MM , back filling, pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 5' to 6'

Providing and planting KACHANAR including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan..including cost of soil filling and size of 5' to 6'

Providing and planting PINK CASIA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan ..including cost of soil filling and size of 5' to 6'

Providing and planting PINK BI FLORA including excavation 450 X 450 X 450 MM , back filling , pest control treatment , leveling . And making good as per landscape design plan .e.including cost of soil filling and size of 5' to 6'

Providing and planting KADAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 5' to 6'

Providing and planting FOX TEL PAM including excavation 450 X 450 X 450 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling and size of 8' to 10'

CARRY PLANTS : Providing and planting EXZORA RED including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'

Providing and planting EXZORA PINK including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'

Providing and planting AKELIFA including excavation 300 X 300 X 300 MM, back filling , pest control treatment,leveling and making good as per landscape design plan ..including cost of soil filling and size of 1' to 2'

Providing and planting MOGARA including excavation 300 X 300 X 300 MM , back filling , pest control treatment, leveling and making good as per landscape design plan .including cost of soil filling 1' TO 2' FT

Providing, supplying, stacking and spreading of screened good garden earth at site including royalty & carriage with leveling of existing natural surface, watering, ramming and also making the required shape & size etc. complete ( garden earth should be free from lust, kankar, vegetation and any undesirable material) in required thickeness as directed by engineer in-charge. (earth measured in stacks will be reduced by 20% for payment)

Supplying of crushed stone aggregate , chipping etc. of hard stone of following size free of disintegrtaed pieces deletarious and organic mater ( for Bitumen surface dressing etc.) and grading as per I.R.C. code. (i) 50mm

Supplying of crushed stone aggregate , chipping etc. of hard stone of following size free of disintegrtaed pieces deletarious and organic mater ( for Bitumen surface dressing etc.) and grading as per I.R.C. code. (i) 40mm

Spreading the stone aggregte for rolling and W.B.M. including filling the interstices to required chember and gradient (excluding spreding of blindage) ii) 40mm to 63 mm size aggregate (h.B.0

Suppalying of Hard Murum 50mm to 150mm size

Spreading blindage or road crust filling the gaps in metal and levelling to camber and gradient as directed. i) Murum

ELECTRIFICATION ELECTRIC WIRING-Point wiring in Copper (MODULAR): Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/ metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ ceiling rose / H.D. Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat III

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall / ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D. Connector as directed. (a) with medium class Rigid PVC pipe and accessories. Cat III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. Cat III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 Amp switch with 2-1.5 sq.mm Cu. Wire from near by switch board / MCB/ DB board with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat III

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug and 16 Amp switch with 2-2.5 sq.mm Cu. Wire from near by switch board / MCB/ DB board (a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ ceiling complete Cat III

Providing & erecting Switch board for Computer or electric apparatus consisting of following items in single board erected on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed for [B] modular type accessories 1 no. 6A/16A universal plug-switch combined.4 nos. 6A Switch 4 nos. 6A 5 pin Plug. Make: As per approved Make List. For Modular type accessories Cat III

Supplying & erecting Electronic Type Cordless Call Bell erected on PVC / Metal board having portable bell push working on D.C. & bell on 230V A.C. supply with cells / battery. Make: As per approved Make List.

Half / One Module Blanking Plate of Standerd Size.

Mains & Wires Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

Providing & erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 4 core 6 Sq.mm.

Conduits & Pipes Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/ in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (b) 25 mm

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/ in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed (c) 32 mm

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (iii) 8 way.

Providing and erecting Approved make ELCB/ RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. (ii) 40Amps. FP Cat.III

Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828 / 1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity (A) 6 to 32 Amp. Cat. III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (c) 63 Amp. Cat.III

CEILING FANS AND ACCESSORIES Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 23OV. 50 c/s.1200 mm. sweep complete, canopy erected on existing hook or clamp with earthing. [Make shall be approved by Engineer in charge]

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Make: As per approved by Engineer In-charge.

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing. Make: As per approved by Engineer In-charge

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. Make: As per approved by Engineer In-charge

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 200mm with 1350 RPM Cat.II

Approved make fluorescent tube 60 cms. 18/20 watt erected, if required. Cat. III

Supplying & erecting energy saving Energy Efficient E+ (1 - 4 ft) 28 watt retrofit tube fitting with one no 28watt T-5 tube complete with E.G.P. wings reflector / clear acrylic guard cover & tube and electronic inbuilt circuit ballast of rating 130 to 325 V A.C. The fittings should be able to fit in any conventional existing T-8 tube fittings complete erected in an approved manner.

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing, drain PVC pipes suitable for (cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 4/5 star Rating of current year (b) for 1.5 ton capacity.

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control cable, necessary PVC drain pipes for Split AC machine up to 4 TR capacity.

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (Approved make OEM has to submit test certificate including value of earth resistant of installation.) [B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc.-Length of Pipe: 2 mtr -Back filling Compound :1 no. Bag of 25 Kg.

Providing and erecting Annealed bare Copper wire 8 to 16 SWG.

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [D] CAT - 6 e.

Supplying, erecting, commissioning and testing analog EPABX CMOS microprocessor-based system having common features with remote programming & remote dialing having following other common features. (Accord Matrix or equivalent approved make)- Auto Call Disconnector- (Incoming - Local- STD) with programmable timing- External Call forward with DOSA- Walk in Class of service & trunk reservation- Boss ring & call back on No Reply last caller recall CLI- Hot Line with Delay & with No.- Unsupervised Conference- Serial DISA (DISA with option to dial another No. if Extn. is No Reply)- Programming Flexibility of all features related to timer (41 Timer)-10 Different group of outgoing call restriction like 95, 97, 98 etc. having following capacity. (C) 4 incoming junction line & 12 extensions.

Supplying & erecting push button type telephone instrument having speaker phone Caller ID & hands free dialing system & 30 memories with display system (a) Single line BEETEL/ Panasonic or equivalent make as directed Engineer-in-charge.

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips (a) Suitable for 10 pair.

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos. of pairs. with necessary connections. [A] Conductor Size 0.5 mm (a) Unarmoured Two Pairs.

1/2.9" 2 Megapixel CMOS, 25/30fps@1080P, 25/30/50/60fps@720P, High speed, Long distance real-time transmission HD & SD switchable, OSD menu, Control over coaxial cable, DWDR, Day/Night(ICR), AWB, AGC, BLC, 2DNR, 3.6mm fixed lens (2.8mm, 6mm optional), max. IR LED's length 30m, Smart IR (IR Dome 2MP Full HD Camera 30Mtr).

1/2.9" 2 Megapixel CMOS, 25/30fps@1080P, High speed, Long distance real-time transmission HD & SD switchable, OSD menu, Control over coaxial cable, DWDR, Day/Night(ICR), AWB, AGC, BLC, 2DNR, 3.6mm fixed lens (2.8mm, 6mm optional), max. IR LED's length 50m, Smart IR, waether proof, DC12V (IR Dome 2MP Full HD Camera 50Mtr).

Supplying, erecting, testing and commissioning of 16 channel video digital recorder 16 vodeo with audio HDD support upto 32TB H264+/H264 dual stream video compression Support HDCVI/AHD/TVI/CVBS/IP video inputs Max. 24 IP camera inputs, each channel up Max. 96Mbps incoming bandwidth (Digital video recorder)

20 Inch LED Display Monitor With HDMI ITEM NAME LED Display

DVR Rack 9 U Fully Loaded (ITEM NAME 9 U DVD RACK)

Supply & Fixing of RG 6 Co-axial + 2 Core Cable With PVC Conduct & Accessosries (ITEM NAME Cable)

Salvage Value to be paid to the government for the materials obtained from the demolition and dismantalling of existing delapidated building including sub-structure and super-structure and disposing off the dismantalled serviceable / unserviceable materials up to 5 km and above including all lead and lift and transportation etc. The demolition and dismantalling work shall be the responsibility and in the scope of work of contractor and cost what so ever shall be borne by then and materials obtained from it shall be the property of obtained by paying it salvage value. The work of demolition and dismantalling to be carried out and make ground level plain and clean without causing any damages to the existing utilities, services, near by govt. and private structure/ building and keeping all human safety etc. (The contractor shall quote salvage rate not below the Rs. 5,48,056 /-)

TIRUPATI SARJAN LIMITED