8985 ADDITION AND IMPROVEMENT BY REPLACING OLD TILES AND WINDOW FALSE CEILING LIGHT FITTING AND ALUMINIUM CABLE INSMA AND REPLACEMENT RENEWAL FITMENT OF WINDOW GRILL IRON ROLLING SHUTTER GLASS WINDOW ANS SS SINK AT AFLOAT CLOTHING CENTRE 1 ACC 1 AT F

Amount

Taking down cement plaster on brick / surfaces built in cement mortar including raking out joints, bading for key scrubbing down with water etc complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortat bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame), n exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down 15mm bore, GI tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed.

All as per item No 5 above but for 20 mm bore GI Pipe complete all as specified and as directed.

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and as directed.

Demolition of Unreinforced cement concrete of any description and in any position not other wise specifically provided for all as specifed and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

S&F in repair false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction. (Make : Everest or equvalent as approved by GE)

M & L for cement concrete type B1 1:2:4 (20 mm graded aggregates), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed.

Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, etc complete all as specified and as directed.

M & L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built insetting in CM (1:6) complete all as specified and as directed.

M & L for brick work with sub class 'B' bricks (old Size) straight or curved on plan exc 6 m mean radius and built in CM (1:6) but half brick thick wall built in CM 1:4 complete all as specified and as directed.

S&F powder coated aluminium of various section as required for doors, window & partion etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed . (i) The rated quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as hinges, handles, locking arrangemnt etc as required, which shall not be measured for arriving the weight. (ii) Items shall be as per weight of aluminium section. (iii) The rated shall be inclusive of complete packing with silicon gel areound contacting surfaces of aluminium work and including matching the existing surface area.

S&F 4mm thick backelite with decoratve choice laminated on both side complition as specified and as directed

M & L Sheet glass 4 mm thk, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complition as specified and as directed

S & F 100 mm stainless steel Butt hinges complition as specified and as directed

S&F Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complition as specified and as directed .

S&F aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complition as specified and as directed

S&F Extrude aluminium anodised alloy handles, fabricated type 150mm size complition as specified and as directed

M & L for Floor door stopper of aluminium alloy body 150 mm long and tongue, anodised, with hard drawn steel spring, fixed in floor complition as specified and as directed

Cement concrete 25 mm thickType B1 1:2:4 (20 mm graded aggregate) complition as specified and as directed

M & L for water proofing plaster for sunken portion in CM 1:3, 15 mm thick in two coats with intetgral water proofing compound at the rate of 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M & L for water proofing treatment of sunken floor/wall surfaces by applying two coats of elastomeric coatings of BRUSHBOND RSX in FOSROC or teckforce 2K STRONG in chowksey Chemical as a two component flexible elastomeric coating with minimum 2mm thickness layer complete all as specified and directed .

Supply only water proofing chemical pidiproof LW+ of Dr fixit or equivalent complition as specified and as directed

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 450X350X7mm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

S&F 15 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed complete all as specified and as directed.

All as per item No 29 above but for 20mm dia medium GI Pipe complition as specified and as directed

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs 10 litres capacity PVC low level flushing cistern of approved make including ball valve,syphon set, inlet and outlet pipe, brackets etc. complete all as specified and directed .

S & F in repairs white glazed earthen ware vitreous Oval type china wash hand basin of size 550x400 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed .

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified. Make. Jaquar cat part No. CNS WHT 705 or equivalent make in list of manufactures

S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified.

Supply and fixed in repair shower rose brass chromium plated with swivel joints, 125 mm size, fixing to steel pipe or union complete all as specified and directed .

S&F in repair glass self assembly type complete all as specified and as directed .

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed complete all as specified and directed ..

S&F in repair Bib taps, cast copper alloy fancy type, chromium plated , screwed down, high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed ..

S&F in repairs two way CP bib cock 15 mm bore with wall flange complete all as specified and as directed ..Make: CON 037KN of Jaquar or equivalent make in list of manufactuures.

S&F in repair stop cocks, cast copper alloy, chromium plated with long shank and cup (concealed type), high pressure with capstan head handle, screwed both ends for iron pipe or for unions of 15 mm dia complete all as specified and directed ..

M&L stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed ..

S&F in repairs brass CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed .

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed.

S&F 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.

S&F 110mm dia PVC ( SWR) grade pipes, single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed ..

S&F 75mm dia PVC ( SWR) grade pipes single socketed in any length with rubber ring joints fixed to walls and laid in flloors/trenches complete all as specified and directed ..

S&F 160 mm dia PVC ( SWR) grade double T/Y with access doors including fixing clips complete all as specified and directed .

All as per item No 48 above but for 110 mm dia complete all as specified and directed .

All as per item No 49 above but 75mm dia complete all as specified and directed .

M&L Cast Iron floor trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed.

M&L Cast Iron Nahani trap 75mm, plain with grating including setting and jointing with silvent cement to waste pipe fixed in cement concrete type B1 (1:2:4). all as specified and directed.

M&L for Water proofing plaster 15 mm thick on Brick masonry surface or surface in 1:6 and finished even and smooth with out using extra cement complete all as specified and directed . (Note : WPC shall be measured and paid seperately).

M & L for rendering 20mm thick on fair faces of brick work or concrete Surface in CM 1:4 and finished even and smooth with out using extra cement. complete all as specified and directed . (Note : WPC shall be measured and paid seperately).

M&L for preparation of newly plastered surfaces of wall, applying two coats of oil emlusion distemper over a coat wall care putty of 3 mm thick and alkali primer complete all as specified and directed.

M & L for complete removal of existing treatment on wall surfaces and applying a coat wall care putty 3mm thick on plastered surfaces, preparatory to distempering and applying two coats of oil bound distemper over a coat of wall primer complete all as specified and directed.

M & L for New treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding complete all as specified and directed .

Supply only Integral waterproofing compound

S & F Vitreous china urinal partition white of size 310x700 mm slabs, terminating about 40 cm above floor line, fixed in repairs complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed.

S&F Bathroom Cabinet Mirror 500x400 mm screwing in all conrner with chromium plated brass screws and cup washers all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers.

M & L for Particle board 18/19 mm thick, medium density, flat pressed, single layer type or three layer type, BWR grade. complete all as specified and directed .

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Removing building material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed

Taking down existing mild steel rolling shutters including the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc complete all as per directed for shutters of area exc 10 sqm and n.exc 20 sqm each, complete all as specified and directed.

S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed.

S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed.

S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed

S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed

S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed

S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified amd directed.

S&F in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and as directed.

S&F in repair mild steel pressed beval handles 150mm long, oval type, enamelled black all as specified and as directed.

S&F mild steel safety lever lock with 4 levers for rolling shutters complete all as specified and directed

S&F for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.

M&L for preparing new or previously untreated surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thk wall care putty on plastered surfaces complete all as specified and directed.

Supply only Integral waterproofing compound

S&F factory made steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified & directed by Engineer-in-charge. Note :- To be fixed at any floor level not more than triple storey.

M&L 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S & F for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizescomplete all as specified and as directed .

S&F stainless steel sink with drainage board made out of stainless steel 1mm thick sheet for kitchen with plug, washers and waste pipe incl bedding in cement mortar to dward wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 x 460mm and bowl size 410 x 330 x 160mm fixed in repair complete all as specified and directed.

S&F fancy type cock suitable for sink with raised J shaped swinging spout (wall mounted model 15 mm dia, screwed for iron pipe and fixed .Make:Cat log No CON-357KN of Jaquar or equivalent make from list of manufactures

S & F UPVC pipes of pressure rating 10 Kgf/cm2 fixed complete to walls, celing etc or in floors etc 15 mm bore pipe complete all as specified and directed

All as per item No. 90 but 20 mm bore complete all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed .

Taking down old U/S tube light fittings single / Twin ,Recess mount fitting , etc and making good the distrubed surface matching with existing surface complete all as specified and as directed

Taking down old u/s MCB DBs complete with MCBs, isolator etc of any type and capacity from wall/ceiling etc & making good to the disturb surfaces complete all as specified and as directed

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper conductor cable of size 1.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:- One light point controlled by one switch

All as per item No. 97 but for One Fan/bell point controlled by one 5A switch complete all as specified and as directed

All as per item No. 97 but for One bell point controlled by one 5A switch complete all as specified and as directed

All as per item No. 97 but for One 5 Amps switch socket combination on independent board complete all as specified and as directed

All as per item No. 97 but for One 5A flush type switch socket point on same board board complete all as specified and as directed

S & F modular flush box of 3 module complete all as specified and as directed

S & F modular flush box of 6 module complete all as specified and as directed

S & F modular flush box of 1/2 module complete all as specified and as directed

S &F modular cover plate with frame 2 moule complete all as specified and as directed

S &F modular cover plate with frame 3 moule complete all as specified and as directed

S &F modular cover plate with frame 6 moule complete all as specified and as directed

M & L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor cable of 2.5 sqmm size 1100 volts grade drawn through and including non metalic rigid PVC casing and caping not less than 25mm width with all accessories fixed on wall including FRLS PVC insulated, unsheathed multistranded copper onductor cable of size 2.5 sqmm as earth continuty conductor connecting to common earth dolly and PVC moulded box ISI marked for having the switches, switch sockets regulator etc complete all as specified for following:- One 5pin, 15 Amps switch socket combination on independent board

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 4 core.

M&L for submain wiring with 2 runs of 4 sqmm and 1 run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed. Note: 2 runs of 4 Sqmm cable and one run of PVC casing casing shall be mneaurted as one unit.

M&L for submain wiring with 2 runs of 6 sqmm and 1 run of 6sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non metalic PVC casing & caping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed. Note: 2 runs of 6 Sqmm cable and one run of PVC casing casing shall be mneaurted as one unit.

S&F LED recess mounted type fitting 36W 2'x2' CRCA LED Slim panel with recess mounting, powder coated white CRCA full glow LED panel including control gear and lamp complete all as directed and specified .

Supply and fix switch piano, modular type 1 way 6 Amps 1 module 240 volts flush type complete all as specified and as directed

Supply and fix switch piano, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and as directed

Supply and fix modular socket 6 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed .

Supply and fix modular socket 16 Amps 2/3 pin 240 volts Ac combined 2 module all as specified and directed .

Supply and fix FAN REGULATOR , modular type 1 way 120W 2 module 240 volts flush type complete all as specified and as directed

Supply and fix bell push, modular type 1 way 16 Amps 1 module 240 volts flush type complete all as specified and as directed

Supply and fix ceiling rose surface bakelite three terminal of size 60x50 mm,240 Volts AC complete all as specified and as directed

Supply and fix bell ding dong, 230 volts, AC complete all as specified and as directed

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting VTPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand or equivalent in list of makes. (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent imake in list of manufactures (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)

Supply and fix MCCB 4pole 100A, 16kA complete all as specified and as directed

S&F MCB SP 6 - 32 Amps, 10 KA Rupturing capacity complete all as specified and as directed

S&F MCB SP 40-63 Amps, 10 KA Rupturing capacity complete all as specified and as directed

S&F MCB SPN 40-63 Amps, 10 KA Rupturing capacity complete all as specified and as directed

Supply , fixing, testing in repairs of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 25 mm dia with 250 micron ( avera Schneider ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF Powerfill Loresco compound shall be supplied in 50 Pound Bag. ( 1 Bag of 50 Pounds required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set alongwith earth pit weatherproof incl all as specified . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.

M & L for 4mm GI wire earth continuity conductor or main earthing lead fixed to wall or buried in ground and fixed to panel/transformer alongwith 20mm gi pipe light grade for protection complete all as specified and as directed .

Supply, install, Test and commissioning wall mounted Split type AC 1.5 TR capacity units indoor/outdoor complete with cordless remote control unit, 220-240 volt, 50Hz, single phase fitted with high quality rotary compressor and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating complete as directed. Note : (a) Rate of supporting brackets for outdoor unit is deemed to be included in rate quoted.Make : Daikin/Hitachi/LG/Blue star (b) Above quoted rate include taking down .

Supply and fix Single pole and neutral enclouser with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed incl taking down old existing unsv enclosure complete all as specified and as directed .

Supply, fixing and clamping , jointing copper tubing for suction line and for liquid discharge line insulated with suitable insulation material including making hole in wall for passing through and making good disturbed surface complete all as specified and as directed

S&F for Rigid non-metallic PVC conduit 20mm dia incl connecting to water cooler drain pipe complete fixing accessories such as complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs complete all as specified and as directed

MADHU ENTERPRIZES

SACHINENTERPRISES

Vandan Enterprises

SHREE JAGDISH FURNITURE CO.