PROVISION OF FURNITURE FOR SECURITY WATCH TOWERS AT DFRL MYSORE AND REPAIR OF TRADE PATTERN FURNITURE AT VARIOUS LABS ESTABLISHMENTS OF BANGALORE AND MYSORE AREA UNDER GEI RD EAST BANGALORE

Amount

Rifle Rack for accommodating 04 Nos Rifles shall be made of teak wood including making mounting arrangements to wall with security chain and locking arrangements complete all as per Drawing No. GE/F-244 as specified and directed. All wooden surfaces exposed to view when placed in position shall be French polished with high gloss finish.

Drawing No FD/MAP-II/01 All dimensions, size and shape shall be as per drawing. Over all size shall be 65mmx25mmx16 gauge MS Tube frame all around, two stiffeners of 25x25mmx16 gauge MS tube.shall be provided and 32x32mmx16 gauge MS tube shall be used for leg of charpoy. 12mm thick commercial plywood BWR Gde shall be screwed with MS cleat and stiffners with cup & washer. 25mmx60mmx6mm MS cleat shall be welded with frame to support ply wood. MS plate 32mmx32mmx5mm shall be welded at bottom of Legs and Over which 3 mm thick rubber sheet fixed with adhesive. All MS rect/sq pipe/welded surface shall be black powder coated. MNF set surfaces shall be painted with two coats of black paint over a coat of primer after preparation of surfaces as directed by Engineer-in-Charge.

Drawing No FD-283 All dimensions, size and shape shall be as per drawing. Over all size shall be 900mm long, 600mm wide and 760mm high. All wood shall be of first class hard wood teak. Legs shall be of 60mmx30mm in section throughout and 741mm high of four in numbers and shall be joined together in front, back and sides with top rails of 20mmx110mm in section provided flush with top of legs. The drawer shall be of 300mm wide. 25mmx40mm in section teak wood stiffener on one side and 20mmx30mm in section teak wood fillet on other side of drawer shall be provided as shown in drawing. Track rails 25mmx25mm in section on one side and 30mmx25mm in section on other side of drawers having rebate for guide rails as 12mmx12mm ins ection shall be provided all as shown in drawing. The sides and back of drawer shall be of 12mm thick and 110mm high teak wood planks. The front of drawer shall tie of 20mmx110mm in section teak wood plank. The bottom of drawer shall be of 6mm thick commercial ply wood. Two bottom rails, one on each short side shall be provided of 20mmx60mm section teak wood joining legs in short sides. 5mmx5mm in section groove shall be provided at the top of legs to the protion visible to view when placed in position. The top shall be of 18/19mm thick pre-laminated particle board exterior grade in one side teak face shall be fixed as directed by Engineer-in-Charge. 4mm thick Teak wood beading shall be provided all around the top. All wooden surfaces exposed to direct vision shall be French polished with high gloss finish.

Drawing No FD-1029 All dimensions, size and shape shall be as per drawing. Overall size shall be 760mm long, 600mm wide and 1100mm high. All mild steel sheet shall be 1mm thick. Two legs shall be provided to lockers as shown on drawing and shall be of 1mm thick mild steel sheet. Top, sides, back, front and shelves shall be of mild steel sheet of 1mm thick. Back shall be fixed to wall with four bolts, two at top and two at bottom. 10mm dia bolts with nuts and washers shall be 100mm long and embedded in PCC block of size 115mmx115mmx100mm. Two handles, chromium plated, 100mm long fixed to shutters. One hasp and staple 75mm long shall be fixed to shutters. The shutters shall have the locking device also. All steel and iron surfaces exposed to view shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Painting shall be done with spray machine.

Drawing No FD-279 All as shown in drawing. Overall size shall be 440mm long, 430mm deep and 890mm high. All wood shall be of 1st class seasoned teak wood. The seat of chair shall be trapezoidal in shape having width as 440mm in front and 405mm in the rear. The front and rear legs shall be 55mmx30mm. The height upto top of seat for front legs shall be 460mm. Legs shall be joined together with 65mmx30mm in section front, rear and side rails. Back rest shall be 430mm high from seat level. Back rest forming part of rear legs shall be 45mmx45mm in section at seat level and 30mmx30mm in section at 240mm high from seat level and 25mmx20mm in section at top of rear rest. Two horizontal rails shall be provided of 45mmx15mm in section made in slightly curved shape out of 4mmx30mm wood section. The top horizontal rail shall be provided at 15mm from top of rear legs and the bottom horizontal rails shall be provided at 45mm from bottom of top rear horizontal rail. Two stiffeners shall be provided joining front leg and rear leg on sides with 25mmx20mm in section as side stiffeners. A stiffener 25mmx20mm shall be provided in middle of side stiffeners joining side stiffeners as shown in drawing. Canning shall be done with 2mm wide and 0.4mm thick half round gola type plastic cane high density and weaving as per Godrej pattern. Cane shall weigh not less than 6gms per 10 running metre. Cane shall be of best quality of make mentioned in list of makes here-in-after. Holes for weaving of cane shall be provided at 12.5mm c/c. Hard rubber/PVC rings shall be provided at the bottom of legs fitted with MS screw of appropriate size. All wooden surfaces exposed to direct vision shall be French polished with high gloss finish as directed by Engineer-in-Charge..

Drawing No FD-75 All dimensions, size and shape shall be as per drawing. Overall size shall be 535mm wide, 560mm deep and 900mm high. Seat shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing having wall thickness 1.6mm. Welding of frame where required shall be as directed by GE and in running welding grinded to give smooth surface. Wood for seat and back, where caning is to be done shall of first class hard wood teak. Wood for handles shall be of teak wood. Weaving of cane shall be done with Premier or Shah brand plastic cane in Godrej pattern as shown in drawing FD-3 (Metric) Sheet 1/1. Cane shall be 2mm wide and 0.4mm thick half round Gola type and woven in Godrej pattern. Cane shall weiigh not less than 6gms per 10 running metre. Wood surfaces of seat, back and handles shall be painted with high glossy, paint black in tint before caning. Painting shall be done with spray machine after preparation of wooden surfaces. All iron surfaces exposed to direct vision when placed in position shall painted with two coats of enamel paint over a coat of primer after preparation of steel surfaces. Painting shall be done with spray machine to achieve smooth surfaces. Bottom of legs shall have hard rubber shoes. Flat iron strips 20mmx3mm two numbers in each seat and back shall be welded to frame of chair as directed by GE.

Drawing No FD -230 All as shown in drawing. Overall size shall be 900mm long, 300mm wide and 150mm high at bottom with support of mirror as 1115mm high. The frame of mirror shall be of overall size of 410mm wide and 790mm high, fixed at 150mm from top of lower base. The box of Table Dressing Gents shall be provided with the back of 12mm thick teak wood plank in one piece and top shall have pre-laminated particle board 12mm thick with teak veneer face on top irrespective of what is shown in drawing. Bottom shall be of 12mm thick pre-laminated particle board with teak veneer face on both sides. Sides and partitions shall be of 12mm thick pre-laminated particle board teak veneer face. The two side drawers equally spaced having 255mm in the middle. Front of drawers shall be of 12mm thick pre-laminated particle board teak veneer face. Sides of the drawers shall be of 12mm thick teak wood plank running smoothly in the drawers. The bottom and back of drawer shall be of 6mm thick plywood commercial. Front face of shelves shall have 3mm thick teak wood edging as shown in drawing. Two supports of 25mm x 35mm x 1115mm teak wood battern shall be provided as shown in drawing. 5.5mm thick mirror of Swastik or Modiguard or Atul free from distortion and other defects shall be provided on 6mm thick plywood backing. The mirror and plywood backing shall be enclosed in the teak wood frame of 20mmx25mm in section made to shape as shown in drawing. 12mmx12mm in section teak wood beading shall be provided at the back of mirror. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Two knobs of aluminium anodized dark brown in shade shall be provided to both the drawers as directed by Engineer-in-Charge. 3mm thick flat iron key plates of mild steel 25mmx25mm in section shall be provided at top of mirror as directed by Engineer-in-Charge and painted with black paint.

Drawing No FD -233 All as shown in drawing. Overall size shall be 1000mm long, 710mm high. All wood shall be first class hard wood teak. 20mmx50mm in section teak wood frame shall be provided horizontally (top and bottom rails and verically sides) 50mmx20mm in section vertical intermediate stiffeners shall be provided at 288mm from right hand side. Two horizontal wooden battens of 50mmx20mm in section, one at 160mm from top rail and other at 200mm from bottom rail shall be provided in the right hand side of vertical intermediate stiffener joining vertical stiffeners with left hand side for providing support for the fixing of pegs. Another wooden battern 50mmx20mm in section shall be provided in horizontal direction on right hand side of vertical intermediate stiffener 430mm from bottom of top rail. 4mm thick teak plywood 1000mm x 710mm shall be provided to front of frame and 4mm thick commercial plywood of 1000mm x 710mm shall be provided to the back of frame. 6mmx35mm in section teak wood edging shall be provided all around the Hat Stand frame. 5.5mm thick Atul or Modiguard or Golden fish mirror of size 300mmx440mm shall be provided with teak wood beading made to shape as shown in drawing out of 10mmx12mm in section teak wood. Brass pegs of size 120mmx75mm (overall) shall be fixed with brass screws as directed by Engineer-in-Charge. Two key plates shall be provided of mild steel sheet 3mm thick, made to shape as shown in drawing. All wood and teak ply surfaces exposed to view when placed in position shall be French polished with high gloss finish. All steel surfaces shall be painted with two coats of black paint over a coat of primer after preparation of surfaces.

Chair Auditorium TP M&L for removing old U/S Spring below the seat and supply and fixing of new Spring matching with the existing shape and size as directed by GE/Engr-in-charge.

Taking out u/s Screw/bolt/nut from Chair Auditorium and S&F new Screw/bolt/nut matching with the existing shape and size also without altering auto tip up feature, wherever any welding work and greasing requied should be carried out as directed by Engr-in-charge.

Taking out U/S hand rest from Chair Auditorium and S&F new hand rest as per trade pattern matching with the existing hand rest, wherever any welding work requied should be carried out as directed by Engr-in-charge

Table officer/Executive TP Taking out U/S locks from the drawers of Table officer/executive make Godrej/Fetherlite any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S channel from the drawers of Table officer/executive make Godrej/Fetherlite any other make any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Table office clerk Steel ( FD 84 & 1004) / TP Taking out unserviceable top fromTable office Clerk steel and S&F new top made out of 19mm thick pre-laminated particle board exterior grade duly provided with 20mmx3mm T/W beading all around the top dully polished all as specified and shown in drg.

Taking out unserviceable drawers from Table office clerk and S&F new drawers made of 1mm thick MS sheet including fixing handles matching with the existing shape and size all as specified and shown in drg.

Taking out unserviceable locks from Table office clerk and S&F new brass lock with duplicate key of approved quality all as specified and shown in drg.

Taking out unserviceable rubber shoes from legs of Table office clerk and S&F new rubber shoes of best quality matching with the existing shoes as apprroved by Engr-in-charge

Taking out unserviceable channel from the drawers of Table office/computer make Godrej/Fetherlite or any other make any shape and any size and S&F new channel making drawer smooth fuctioning as per trade pattren matching with existing shape and size approved quality all as directed by Engr-in-charge.

Taking out unserviceable locks from the drawers of Table office/computer make Godrej/Fetherlite or any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality all as directed by Engr-in-charge.

M&L for scraching old unserviceable paint from Table office clerk cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ grey/ white or any other shade as directed by Engineer-In-Charge.

Table office officer steel TP/FD-84/FD-1002/1003 Taking out unserviceable top fromTable office officer steel and S&F new top made out of 19 mm thick pre-laminated particle board exterior grade duly provided with 20mmx3mm T/W beading all around the top dully polished all as shown in drg.

Taking out unserviceable drawers from Table office officer steel and S&F new drawers made of 1mm thick MS sheet including fixing handles matching with the existing shape and size all as specified in drg.

Taking out unserviceable locks from Table office officer steel and S&F new brass lock with duplicate key of approved quality all as shown in drg.

Taking out unserviceable locks from the drawers of Table officer/executive make Godrej/Fetherlite or any other make any shape and any size and S&F new lock as per trade pattren matching with existing shape and size approved quality all as directed by Engr-in-charge.

Taking out unserviceable channel from the drawers of Table officer/executive make Godrej/Fetherlite or any other make any shape and any size and S&F new channel as per trade pattren matching with existing shape and size approved quality all as directed by Engr-in-charge.

Taking out unserviceable rubber shoes from Table office officer steel And S&F new rubber shoes of best quality matching with the existing shape and size

Taking out unserviceable revolving wheel from the padestal unit of table officer/executive make Godrej/Fetherlite or any other make any shape and any size and S&F new revolving wheel as per trade pattren matching with existing shape and size approved quality all as directed by Engr-in-charge.

M&L for scratching old unserviceable paint from Table office officer steel cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge

Almirah large steel with shelves/Medium steel with shelves (FD-67,1031,1032/ FD/E6/MAP/18/TP) Taking out unserviceable locks from Almirah large steel with shelves/Medium steel with shelves S&F of new lock with duplicate key as approved by Engr-in-charge. All as specified and shown in drg.

Taking out unserviceable handle from Almirah large steel with shelves/Medium steel with shelves and S&F new CP handle as approved by Engr-in-charge all as specified and shown in drg.

Taking out unserviceable legs from Almirah med steel S&F new leg made out of 1mm thic MS plain sheet complete with all as specified and shown in Drg.

Taking out unserviceable legs from Almirah Large steel S&F new leg made out of 1mm thic MS plain sheet complete with all as specified and shown in Drg.

M&L for scratching old unserviceable paint from Almirah med steel with shelves cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge

M&L for scratching old unserviceable paint from Almirah large steel with shelves cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge

Taking out unserviceable locks from Almirah large steel with shelves/Medium steel with shelves Make Godrej/ Fetherlite or any other make and S&F of new lock as per trade pattren matching with existing shape and size with duplicate key as approved by Engr-in-charge.

Charpoy GI pipe (FD-220) Taking out unserviceable long rail from charpoy GI pipe and S&F new long rail 32mm bore medium grade ISI marked complete all as specified and shown in drg

Taking out unserviceable short rail from charpoy GI pipe and Fixing Short rail made out of retrieved unserviceable long rail mentioned item No. 1 above complete all as specified and shown in drg.

Taking out unserviceable leg from charpoy GI pipe and fixing of leg made out of retrieved unserviceable short rail as item mentioned No 41 above. Bottom of legs shall be plugged/welded with 5mm thick MS plate complete all as specified and shown in drg.

Taking out unserviceable GI 3 way elbow 32mm bore from Charpoy GI pipe and S&F new elbow GI 32 mm bore ISI marked complete all as specified and shown in drg

Taking out unserviceable GI check nut 6mm thick 32mm from Charpoy GI pipe and S&F new check nut matching with the existing shape & size.

Taking down of worn out materials from Charpoy GI Pipe and supply and fixing of plywood top 12 mm thick, plywood top shall be fixed with 3", 6 mm dia nut and bolt with washers.

Taking out unserviceable MS flat iron of size 40mmx5mm from chorpoy GI pipe and S&F new MS flat iron of size 40mmx5mm 3' length of best quality matching with the existing shape and size all as directed by Engr-in-charge

Charpoy IP Hard top FD/MAP/II-01 Taking out unserviceable Plywood form Charpoy IP Hard top and Supply and fix New plywood 12 mm commercial ply ISI Mark matching with existing shape and size all as specified and as shown in drawing

Material and labour for scratching old unserviceable paint from Charpoy IP with hard top cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint black or any other shade as directed by Engineer-In-Charge

Chair School Hand Board (FD/E6/MAP/05/TP) Taking out unserviceable open table top from chair school hand board and supply and fix new top made out of 18th mm thick pre laminated particle board with PVC edging all around top complete all as specified and shown in drawing

Taking Out unserviceable PVC seat back one piece from Chair School and Supply and fix New PVC seat back one piece matching with the existing shape and size all as specified and shown in drawing

M&L for scratching existing paint filling the cracks making the surface smooth and M&L for painting the chair school with hand board with one coat of synthetic enamel paint as per shade approved by Engr-in-charge of make Asian/Berger as directed by GE/Engr-in-charge.

Storage Unit Steel TP M&L for removing old U/S doors from the storage unit and supply and fixing new doors made out of 25mm thick pre laminated particle board with PVC edging all around as per shade approved, without changing of existing shape and size including changing of old u/s hinges and handle if required as directed by GE/Engr-in-charge.

Taking out U/S lock from Storage unit steel and S&F of new lock with duplicate key as approved by Engr-in-charge.

M&L for removing old U/S hinges from the doors of the storage unit and supply and fixing new hinges as per existing shape and size as directed by GE/Engr-in-charge.

M&L for removing old U/S handles from the doors of the storage unit and supply and fixing new handles as per existing shape and size as directed by GE/Engr-in-charge.

Locker bed side steel (FD-257 & 1029) Taking out U/S hasps & staple from Locker bed side steel and S&F new hasp & staple 100m long chrome plated best quality of approved by Engr-im-charge All as specified and shown in drg.

Taking out U/S handle from Locker bed steel and S&F new C.P. steel handle 100mm long of approved quality as directed by Engr-in-charge

Taking out U/S hanging rod from locker bed side steel and S&F new C.P. steel hanging rod 19mm of approved quality.all as specified and shown in n drg

M&L for scratching old U/S paint from locker bed side steel cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge

Cabinet Filling Steel (FD-67) Taking out U/S locks from Cabinate filling and S&F new brass lock with duplicate key with complete Accessories as approved by Engr-in-charge including repair to complete locking device with rolling function smoothly. All as directed.by Engr-in-charge

Taking out U/S handle from Cabinat filling steel and S&F new handle aluminum of approved quality. All as shown in drg.

M&L for scratching old U/S paint from Cabinate filling cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge.

Rack Storage steel any type any size FD/TP M&L for scratching existing painting filling the cracks making the surface smooth and M&L for painting the Rack Storage with one coat of synthetic enamel paint as per shade approved by Engr-in-charge complete and all as directed by GE/Engr-in-charge.

Taking out U/S shelves from Rack Storage Steel and S&F new shelves made of 1mm thick MS sheet matching with the existing shape and size all as specified and shown in drg.

Rack Pigeon hole/Tool Crib steel any type any size FD/TP M&L for scratching existing painting filling the cracks making the surface smooth and M&L for painting the Rack Pigeon hole/Tool Crib steel with one coat of synthetic enamel paint as per shade approved by Engr-in-charge complete including repair of rack all as directed by GE/Engr-in-charge.

Book case steel (FD-90 & 1028) Taking out U/S locks from Book case steel and S&F new six lever lock with duplicate key of approved quality. All as specified andshown in drg.

Taking out U/S handle from Book case steel and S&F new C.P. steel handle 100mm long of approved quality matching with the existing shape & size.

Taking out U/S plane glass from Book case steel and S&F new plane glass of size 3/4m thick of approved quality matching with the existing glass pane

M&L for scratching old U/S paint from Book case steel cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shade as directed by Engineer-In-Charge

Storage Unit Wooden TP M&L for removing old U/S shutters/doors from the storage unit wooden and supply and fixing new shutter/doors made out of 18mm thick plywood with 3.5mm thick veneer as per shade approved, without changing of existing shape and size including changing of old u/s handles if required as directed by GE/Engr-in-charge.

Taking out U/S lock from Storage unit wooden and S&F of new lock with duplicate key as approved by Engr-in-charge.

Workstation (TP) Taking out U/S top of any size from Workstation and S&F new top matching with the existing shape, size & design made of pre-laminated particle board exterior grade 25mm thick duly covered with PVC edge binding all around top all as directed by GE/Engr-in-Charge

Taking out U/S supporting legs of any size at the bottom of the top from work station and S&F new legs matching with the existing shape, size & design made of pre-laminated particle board exterior grade 25mm thick duly covered with PVC edge binding all around top if required and all as directed by GE/Engr-in-Charge

Taking out U/S channel from the Key Board Tray / Mobile Pedestal and S&F new channel making smooth fuctioning as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S white board/Magnetic board of any size from Workstation and S&F new white board matching with the existing shape, size & design all as directed by GE/Engr-in-Charge

Taking out U/S locks from the Mobile Pedestal and S&F new lock as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S revolving wheel from the Mobile padestal unit and S&F new revolving wheel as per trade pattren matching with existing shape and size approved quality. All as directed by Engr-in-charge.

Taking out U/S handles from the Mobile Pedestal and S&F new handle as per trade pattren matching with existing shape and size of approved quality. All as directed by Engr-in-charge.

Chair revolving officers high back/executive with PU arm Taking out U/S caster wheel from any type of chair revolving and S&F new caster wheel of different type as per trade pattern matching with the existing shape & size as approved by Engr-in-charge

Taking out U/S tapestry cloth from seat & back of Chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc. As required. All as directed by Engr-in-chrarge

Taking out u/s revolving base MS/PVC from chair revolving and S&F new revolving base MS/PVC with wheel matching with the existing shape and size as approved by Engr-in-charge.

Taking out of Hydrualic Assembly/Gas lift From Chair revolving High back and S&F new Hydrualic assembly/Gas lift as per trade pattern matching with the existing shape and size as directed by Engr-in-charge.

Taking out U/S hand rest from chair revolving and S&F new hand rest of different type as per trade pattern matching with the existing hand rest.

Chair Revolving Medium Back/Low Back with or without arm TP Taking out U/S caster wheel from any type of chair revolving and S&F new caster wheel as per trade pattern matching with the existing shape & size.as approved by Engr-in-charge

Taking out U/S tapestry cloth from seat & back of chair revolving and S&F new tapestry cloth of approved quality & shade including replacement of foam cushion and plywood etc.all as directed by Engr-in-charge

Taking out u/s revolving base MS/PVC from chair revolving and S&F new revolving base MS/PVC with wheel matching with the existing shape and size as approved by Engr-in-charge.

Taking out of Hydrualic Assembly/Gas lift From Chair revolving Low back/Med back and S&F new Hydrualic assembly/Gas lift as per trade pattern matching with the existing shape and size as directed by Engr-in-charge.

Taking out U/S hand rest from chair revolving and S&F new hand rest as per trade pattern matching with the existing hand rest as directed by Engr-in-charge

Chair Visitor TP Taking out U/S tapestry cloth/rexin/letherite from seat & back of Chair visitor and S&F new tapestry cloth/rexin/letherite of approved quality & shade including replacement of foam cushion and plywood etc. As required. All as directed by Engr-in-charge

Taking out U/S hand rest from Chair visitor and S&F new hand rest of different type as per trade pattern matching with the existing hand rest.as approved by Engr-in-charge

Table Centre with Glass Top (TP) Taking out U/S glass top from table centre and S&F new glass top made of 5mm thick tinted glass duly pencil polished edge as per trade pattern matching with the existing shape and size all as directed by Engr-in-charge.

M&L for scratching existing polish filling the cracks making the surface smooth and M&L for polishing the table centre with glass top with spirit poliosh compelte as directed by the Engr-in-charge.

Corner Table with Glass Top (TP) Taking out U/S glass top from corner table and S&F new glass top made of 5mm thick tinted glass duly pencil polished edge as per trade pattern matching with the existing shape and size all as directed by Engr-in-charge.

M&L for scratching existing polish filling the cracks making the surface smooth and M&L for polishing the Corner Table with glass top with spirit polish complete all as directed by Engr-in-charge.

Chair tabular /CBA steel with and without arms (FD-75) Taking out U/S seat and back from Chair tabular steel And S&F new seat and back of hard wood duly canned with 2 to 2.5mm wide plastic cane gola type premier/shah brand as per Godrej pattern. All as directed by Engr-in-charge

Taking out U/S hand rest from Chair tabular steel and S&F new hand rest of size 45x25mm, 440mm long duly polished matching with the existing hand rest.all as specified and shown in drg.

M&L for scrating old U/S paint from Chair tabular steel cleaning and making the surface smooth and painting the same with one coat of synthetic enamel paint OG/ gray/ white or any other shadeas with fixing new rubber shoes directed by Engineer-In-Charge

Sofa set Three seater (TP) M&L For removing old US letherite/fabric tapestry from the sofa set three seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape 3 Nos each seat and three Nos each set for back without changing of existing shape and size.as directed by GE/Engr-in-charge.

Sofa two seater (TP) M&L For removing old US letherite/fabric tapestry from the sofa two seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape two Nos each set for seat and two Nos each set for back without changing of existing shape and size.as directed by GE/Engr-in-charge.

Sofa single seater (TP) M&L for removing old US letherite/fabric tapestry from the sofa single seater and supply and fixing new leathrite/fabric tapestry as per shade approved by GE/Engr-in-charge including replacement of u/s foam cushion of any size and shape one Nos each for seat and one Nos each for back without changing of existing shape and size.as directed by GE/Engr-in-charge.

Ms GHOSH AND SONS

M/s National Traders

Sreyas Enterprises