SPL REPAIR TO BDLG NO T105 and T106 AND SPL REPAIR TO TOILET OF BSO OFFICE AND SPL REPAIR TO SECURITY LIGHTS AND UG CABLES ALONGWITH TIMER PANEL AND OTHER ALLIED WORKS NEAR STP AT OTA GAYA AND PROVN OF SEPTIC TANK NEAR T131 BLDG AT 27 BIHAR BN GAYA

Amount

Taking up old U/S LT UG cable of size 10 to 16 Sqmm 2/3½/4 core all as specified and directed.

Taking up old U/S LT UG cable of size 35/50 Sqmm 3½ core all as specified and directed.

Excavation in trenches/ foundation in soft/loose soil not exc. 1.5 metre wide and n'exc. 1.50m deep for HT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, complete all as specified and directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil, complete, all as specified and directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point all as directed.

Materila and labour for providing and caushing with dry fine sand including filling, spreading, leveling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Supplying & laying burnt clay bricks, sub class 'B', old size laid in trenches over cable protection complete all as specified and directed.

M&L for 50mm bore GI tubing light grade with all fittings laid across road or across PCC drains, along electric pole or floor/wall for cable protection complete all as specified and directed.

Supply, laying and testing of LT cable 1100 volt grade XLPE insulated heavy duty underground electric cable PVC bedded and sheathed steel strip armoured aluminum stranded conductor of size 16 Sq mm 4 core complete all as specified and directed.

Supply, laying and testing of LT cable 1100 volt grade XLPE insulated heavy duty, underground electric cable PVC bedded and sheathed steel strip armoured aluminum stranded conductor of size 50 Sq mm 3.5 core complete all as specified and directed.

S & F in replacement of Thermoplastic cable junction boxes IP 65 with metric knockouts for cable entry, weather proof for outdoor installation and including glands and with 4 terminals for terminating one incoming and outgoing UG cable of size 10/16 sqmm 4 core and fixed adjacent to the Octagonal Poles by means of PCC foundation and suitable size MS angle iron brackets with nut and bolts and incl provn for fixing 01 Nos of single pole MCB SP 6 Amp 'C' series inside the box and all specified and directed. NOTE : MS angle iron brackets are to be painted with 2 coats of Airforce blue paint over a coat of red oxide metal primer . Make- Sintex cat No GSJB. 3726/Hensel or equivalent.

S & F PVC insulated & PVC sheathed 3 Core 1.5 sqmm copper conductor cable drawing inside the Pole/ bracket of street light complete all as specified and directed. Make - Havells/Ploycab/Grandlay or equivalent.

Supply and fixing LED street light fitting 70 Watt230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermalmanagement in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing of Three phase Nature Switch Smart Timer based Automatic Street Light Control Panel 415V, 12-15KW, IP 54 rating with 3 Nos Incoming - Outgoing MCBs of 32 Amps & 3 Nos Contactor (3 -Pole) of 32 Amps & circuit wiring with 10 sqmm copper wire for outdoor luminaries, automatically switching ON/OFF (nature switch). Nature switch smart timer should be maintenance free in design and settings accessible via a Mobile App (with Bluetooth connectivity). The mobile App should allow users to customize the ON & OFF timings based on Natural Light (Sensor), Local Sunset/Sunrise (Astro) and Time. The SMart Timer along with suitable power contactors and Incoming-Outgoing MCBs should be enclosed in a pole mountable Rust Proof, Electric Shock proof, termite proof and FR grade SMC Enclosure confirming to IP 54 incl fixing arrangements by means of 25 mm x 3 mm MS flat clamps, nuts, bolts and washers complete all as specified and directed. (Make-Swadeep Model No NAVDEEP-54-12kW3P or equivalent)

M&L painting of LT steel tubular pole with one coat of aluminium paint including brackets and synthetic enamel painting of Black & White alternate strip of width of 15 cm each (total 0.75M above foundation) & writing pole number on black background with white lettering after scraping /cleaning well the existing rusted surface complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil

Excavating over areas exc 1.5 m but n.exc 3.00 mtr deep and getting out in Hard/dense soil

M&L Ready mix plaster 15mm thick on any face of brickwork or concrete surface and finished even & smooth all as specified

Supply only Integral water proofing compound

M&L for use and waste of Form work to sides of concrete foundations, footings, bases of columns, sides & soffits of foundation & plinth beams and similar work Rough finished surfaces of concrete flat surfaces

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter of rough finished surface of concrete.

M&L for use and waste of Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick for rough finished flat surface of concrete complete

M&L for Mild Steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with & incl Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M&L RCC M-30 design mix using 20 mm graded aggregate in Foundations, incl rafts, footings, foundation beams; plinth beams; bases for columns and mass concrete

M&L RCC M-30 design mix using 20 mm graded aggregate in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttressescomplete all as specified and directed

M&L for RCC M-30 (design mix) using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings and similar work complete.

Dismantling of asbestos cement (corrugated, semicorrugated etc,) sheets in roof coverings.

S & F Pre- painted galvalume aluminum zinc coating (AZ 150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws at every alternate corrugations as specified and directed.

S & F pre-painted galvalume aluminum zinc coating (AZ 150) GI based plain steel sheet 0.5mm thick of any coloure in ridge having tensile strength of 550 Mpa fixed with self tapping screws as spd and directed by eng-in-charge etc.

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle iron cleats or other connecting plates all as specified and directed. Fe410-W (gde-E-250) quality- A

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc Fe 410 W (Gde E - 250 quality).

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as spfd and directed by engr-in-charge.

Excavating in trenches not exc 1.5m wide and not exceeding 1.5m deep as in soft/loose soil.

Returning filling in, including spreading leveling, watering and well ramming in layer n. exc 25 cm in soft/loose soil.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point of soils all as specifed and directed.

Demolition of stone/brick masonry in CM or cement/ lime mortar including all qnoins, arches, pillars etc.

M & L cement concrete type D2 1:4:8 (40mm graded aggregate ) as in foundation filling and mass mass concreting.

M&L for Brick work with sub class 'B' bircks straight or curved on plan exc 6mtr mean radius built in CM 1:4 complete.

M & L brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc.

M&L for rendering 10mm thick internal surfaces on other than fair faces of brick work in cm 1:6 as directed by Engr-in-charge.

M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement including WPC as per manufacturer instruction complete all as specified and directed. (WPC will be measured seperately)

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in soft / loose soil complete all as specified and directed.

M & L for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete.

Supply only Liquid water proofing compound (Sika latex power)

M& L for preparation of newely plastered surface of walls and applying two coat of cement base paint over a coat of primer complete.

M& L for preparation of newely plastered surface of walls and applying two coat of acrylic distemper over a coat of primer as in walls complete.

Demolition of cement concrete Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L rubber Moulded pre-cast concrete interlocking paver block any shape and colouring and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigments over & including 40 mm thick sand cusion & joint filled with sand complete all as specified and directed

M & L for 75 mm thick Plain Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets

M & L for anodised aluminium snap grid frame work for false ceiling all as specified and as directed.

S & F of 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system duly suspended with 2 mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof complete all as specified.

M&L for Preparation of old/new painted steel surface of any description, over 10cm in width or girth not other wise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and directed.

M&L Sand filling under floors are in foundation including watering and consolidation

S&F Powder coated aluminium frame/shutters for windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F Solid PVC Door frame size 50mmx 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube and fixing in opening as per spc & drawing.

S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifiaction & drawing.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M & L coloured digital Glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 7-8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 completed.

M & L coloured Non Skid ceramic coloured tiles (square/rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer with CM 1:4 complete

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed. (Make-SEIKO/Plumber/Parryware/Essco)

S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make-Plumber/ Parryware/ Essco)

S&F PVC connections 15mm size with PTMT nuts of length 450 mm all as specified and as directed. Make - Prayag/Polytuff/Symet

S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. Make : Prayag

S& F PVC ( SWR ) nahani ntrap / floor trap 75 mm dia all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince

S&F in repair 15 mm dia two way angle valves, cast copper alloy,fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions (Make-SEIKO/Plumber/Parryware/Essco)

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners all as specified and directed by Engr-in-charge. (Make:- Parryware/ Hindware /Cera)

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets

S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S & F as in repair of white seat cover for pedestal pattern water closet including fixing bolts complete.

M & L for Providing, cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) in cills, steps; seismic and other similar bands, plinth courses copings including necessary form work all as specified and as directed

M & L for RCC Type B-1, 1:2:4 using 20 mm graded aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete.

M&L for mild steel TMT bars 10mm dia and over cut to lengh bent to shape required incl cranking bending spirally for hooping for columns hooking ends and binding with and incl ms wire not less than 0.9mm dia.

S&F as in repair MS Butt hinges, medium weight cold rolled of size 75 mm .

Taking down chowkhats or frames not exc 1.5 Sqm ( without taking shutters from the frame).

S&F 100mm long aluminium anodised barrel tower bolt complete.

S & F of powder coated aluminium alloy handles, fabricated type, anodised 100 mm long

S&F vitreous china urinal, half stall type, white including CP coupling waste pipe white, flat back size 630x450mm excluiding taps, chain and plug including waste pipe, brackets, 32 mm dia CP coupling cutting for and pinning in ends for brackets or ercting stand complete all as specified and directed by Engr-in-Charge

S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed by Engr-in-charge.

S & F Male Brass Threaded Adaptor (MTA/ MBTA/Female Brass Threaded adaptor (FTA/ FBTA) 20 mm dia complete all as specified.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) vent cowl for 110 mm bore pipe

S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement

Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified

S&F in repair rotational moulded three layer polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge. Make;- Sintex/ Rotex/ Polycon

S & F Century PVC boards Starke prime thickness 8 mm with decoravtive century starline laminates gloss colour wenge brew 80675 G on front of thickness 0.8-1.0mm cut to length of size and shape complete including necessary frame work for wall panelling all as specified and directed by Engr-in-charge.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed bed in cement mortar 1:6 complete

SINGHAL ENTERPRISES (BID ID -3379717)

M/S ABHAY KUMAR AND BROTHERS (BID ID -3379213)