Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹7,300
Closing Date
15 Dec 2020, 5:00 pmClosed
S.E. E D C- MVVNL,Unnao
S.E.E Distribution Circle Unnao
Replacement damaged pole AND HT/LT line and increasing capacity of distribution T/F and other related work at EDD-IV, Bangarmau, Unnao
2020_MVVNL_536747_1
143/E.D.C./Unnao/2020-21
Open Tender
Miscellaneous Works
Fixed-rate
180 days
Unnao
As per tender document
2 documents required · 2 mandatory
₹1,180
A/C-No.3355002101008374,IFSC-Code-PUNB0335500,
₹7,300
2 Jan 2021
10 Dec 2020
16 Dec 2020
10 Dec 2020
15 Dec 2020
10 Dec 2020
Amount
Carriage of Following materials from store center Unnao to work site along with loading unloading and proper stocking distance above 50-100 km
PCC/STP Poles
11 KV XLPE cable (3x120 mm2)
250 KVA T/F
PVC Cable 1x400/3.5x400
Carriage Loose line materials including conductor, single and double pole accessories, stay rod, earthing rod, insulator, X-arm etc.
Erection of PCC/ST pole including digging of pits, fitting of accessories along with cartage & dragging from dump site to pit site.
Making T-off arrangement including fabrication & fitting of accessories.
Grouting of PCC/ST poles as per RESPO norms with grouting material.
Earthing of PCC/ST poles as per RESPO norms .
Digging of pits, fixing & nozzeling of Stay wire and grouting of stay rod RESPO norms with grouting material.
Laying of 11 KV 3-phase line stringing and sagging of ACSR weasel conductor including all associated works and making clearance of road with joints/jumpers and binding of insulators as required
Dismantling of 11 KV 3 phase L.T. line on existing pole including rolling back its conductor/G.I. wire from work site to dump site.
Carriage of rusted G.I. wire reach from dump site to ESC Unnao with loading, unloading and proper stacking.
Welding of rusted and broken ST pole by electronics with help MS Angle 65X65X6 mm2 after digging of pit and stretching of pole, all material and labour will be provided by contractor
Wall type earthing of with 60 feet deep boring and providing GI Pipe 1.5" dia ("B" class) and earthing must be jointby GI Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be suppliedby the contractor
Construction of T/F plinth of size 2x2x1.5 mtr. With the help first classbrick & masnory in the ratio 1:4 cement and sand coarse. Filling the structure completely per norms with RCC to 1.22 cement & stone grit with MS Bar and MS chanel for restiong T/F
Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 mtr. Fabrication 45x45x5 mm angle the frame is also have 1 no. Horizantal runner of MS flat 40x5 welded in middle to support of wire mesh rectangular welded type wire mess of size 50x25 made of 12 SWG wire mess shall be welded all along the perpphery of the frame as well as on Hotrizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be wilded with MS flat of size 25x3 mm to support as per RESPO specification & direction of E/I.
Construction of masonry metalic type distribution pillar of size 1x1.5x2.5 mtr. With supply & fixing of fabrication 4 nos. doors (2ft.x4ft) made of BP sheet of 18 swg with locking arrangement 2 nos. straight MS angle 50x50x6 mm (1800 mm long) 2 nos 500 Amp. 300 Amp. henely Type Tailess Fuse Unit, 3 Nos. coper bus bar of size 1000x50x6 mm and one No. alum busbar 1000x50x6 including all civil material required for work. All material shall be supplied by contractor.
Fabriction, errection & commissioning of 250 KVA T/F on plinth with all accessories. All material except 250 KVA T/F shall be supplied by the contractor
Dismentling of 100 KVA T/F opening jumpers, LT cable and other accessories of T/F including safe loading, unloading carriage from site to J.E. Dump store/Center store
Supply and fixing of cooper L-piece 250/400 sq.mm 4 nos. and alluminium lugs 400 sq.mm 12 no. all material provided by contractor
Fixing of LT PVC cable 1x400/3.5x400/1x16 sq.mm 580 mtr.
Digging of pit suitable for 3x120 sq.mm 11 KV XLPE cable laying. After 11 KV XLPE cable laying refilling by Bricks & sand as per RESPO Norms only 11 KV XLPE cable supplied by department
Cable hosting of 11 KV 3x120 sq.mm XLPE cable at the following including jumpering etc complete with help of GI Pipe as per RESPO Norms. GI pipe and other required material shall be supplied by contractor
High pressure testing of 11 KV 3x120 XLPE cable along with arrangement of high Pressure equipment
Cutting of tree branches which are spread over on 11 KV feeders including of line Insulator.
M/S EVERGREEN TRADERS
M/S NEW MAA KALYANI TRADERS
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .