SPECIAL REPAIRS OF ROAD FROM CULVERT NEAR MES BLDG UPTO 200 M LENGTH IN RA AT CAD PULGAON

Amount

Excavation over areas, not exceeding 1.5 M deep and getting out in soft/ loose soil & removing material (soil) exc. 250 m but n. exc 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour for Moorum / red bajri filling in floors / pavings / road, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.

Rolling and consolidating road formation surfaces with 8 to 12 tonne power road roller, watering as necessary including filling in hollows and depression to required gradient and camber etc complete all as specified and directed.

Material and labour for 200mm thick (spread thickness) soling (or sub base) with broken boulders or quarried stones, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller complete all as specified and as directed.

Material and labour for WBM 150mm thick in two layers each of 75mm thick (compacted thickness), with coarse aggregates (Granite, trap or basalt ) of grading 2 (63 to 40mm size) or of grading 3 (50mm to 20mm size), spread, rolled and consolidated to gradient and camber required with 8 to 12 tonne power roller complete all as specified and as directed.

Ditto all as per item no. 5.00 here in before but except materials, complete all as specified and as directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces for depth exc 50mm and not exc 100mm for area exc 400 sqm. complete all as specified and as directed.

Screening road metal, chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring ( Materials from both sides of screen measured ), complete all as specified and as directed.

Material and Labour for preparing Unsurfaced WBM by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 Sqm using paving bitumen grade VG-10, complete all as specified and directed.

Material and Labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with binder content (paving bitumen) of 4% by weight of total mix all as specified and directed.

Material and Labour for preparing Black top surfaces by brushing with wire brushes for removing caked mud etc,sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 Sqm for receiving Bituminous Macadam using paving bitumen grade VG-10 complete all as specified and directed

Material and Labour Applying evenly a priming/tack coat with bituminous primer over black top surface at 5 kg per 10 sqm using paving bitumen grade VG-10 including premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content (minimum) by weight of total mix (bitumen VG-30) and 2% cement filler rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all as specified and directed. Note for Sr item 11 & 12 : The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Surface dressing n.exc 15 cm deep and getting out in hard/ dense soil for road side berms to required gradient complete all as specified and as directed.

Material and labour for approved moorum/red bajari in road berms, spread in roads berms 100 mm spread thickness rolled and consolidated to gradient and camber required with light roller of capacity not less than 0.5 tonne complete all as specified and directed.

Material and labour for continuous brick edging with width equal to the width of the bricks, laid dry on end vertically with old size fly ash bricks, complete all as specified and directed.

Material and labour for Preparation of road surface and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using 'HOT MARK' thermoplastic modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers thermoplastic requirement for glass beads shall be the Table No 800.4 of MORTH specification including spraying of glass beads etc. all as per manufacture instructions and as specified and directed.

Supply and fixing road stud 110 x 128 x 29.5 mm aluminium alloy die casted dynamically designed to bear impact load upto 25 tonne and fixed with 2 Nos highly reflective relectors and 2 Nos eye bolt each on both side complete including taking down old one, complete all as specified and directed.

Supply and fixing solar studs size 125 x 125 x 20 mm aluminium alloy and polycarbonate stud, (Red/ Yellow LED's) 3 + 3 LED's with shank in tough aluminium diecast body with stem, complete as per MORTH/ IRC specifications and manufacture's instruction, complete all as specified and and directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 8,225.00/- ]

M/S Ramakant Chourasia

Bidder Name

M/S.Chourasia Construction Company

M/S Ramakant Chourasia